Important Information Manual

Problem Possible cause Solution
The suction
power is
set to a low
setting.
Increase the suction power with the
regulator on the appliance or on the
handgrip.
The nozzle,
tube or hose
is blocked up.
To remove the obstruction, disconnect
the blocked-up item and connect it (as
far as possible) the other way around.
Switch on the vacuum cleaner to force
the air through the blocked-up item in
opposite direction.
When I use
my vacuum
cleaner I
sometimes
feel electric
shocks.
Your vacuum
cleaner builds
up static
electricity. The
lower the air
humidity, the
more static
electricity
the appliance
builds up.
Discharge the appliance by frequently
holding the tube against other metal
objects in the room (for example the
legs of a table or chair, a radiator etc.).
You can also raise the air humidity level
in the room.
Specic
types only:
The infrared
remote
control does
not function.
The batteries
do not make
full contact
or have not
been inserted
properly.
Remove the lid of the battery
compartment and insert the batteries
correctly. Make sure the - and + poles
point in the right direction.
The batteries
are empty.
Replace the batteries. You can continue
to vacuum but you cannot use the
remote control to increase or decrease
the suction power or to switch off the
appliance. To switch off the appliance,
press the on/off button on the appliance.