User manual

1 To connect the small nozzle, insert the tube or handgrip while turning it a little.


1 Pull the mains cord out of the appliance and put the plug in the wall socket.
2 Press the on/off button on top of the appliance with your foot to switch on the
appliance (Fig. 11).

During vacuum cleaning, you can adjust the suction power with:
- the slide on the handgrip of the hose, or (Fig. 12)
- the electronic suction power control on the vacuum cleaner (Fig. 13).
Note: Use maximum suction power to vacuum very dirty carpets and hard oors. Use minimum suction
power to vacuum curtains, tablecloths etc.

- If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park
the tube in a convenient position (Fig. 14).

1 Switch off the appliance and remove the mains plug from the wall socket.
2 Press the cord rewind button to rewind the mains cord (Fig. 15).
3 After use, store the crevice tool in its holder (Fig. 9).
4 Put the appliance in upright position and insert the ridge on the oor nozzle into the storage
slot on the appliance (Fig. 16).

Always unplug the appliance before you empty the reusable dustbag.
- Empty the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.
even when the nozzle is not placed on the oor (Fig. 17).

1 Place your ngers under the release tab (1) and open the dustbag compartment (2) (Fig. 18).
2 Pull the dustbag xation tab (1) forward and remove the dustbag (2) (Fig. 19).
3 To empty the dustbag, shake the contents out over a dustbin.
4 Pull the xing tab forwards (1) and place the empty dustbag between the ridges (2) (Fig. 20).
Note: Make sure the arrow on the dustbag points upwards.
5 Release the xing tab to x the dustbag in position.
6 Close the cover (‘click’) (Fig. 21).
Note: You cannot close the cover if no dustbag has been inserted.
8