User manual
- During vacuum cleaning, you can adjust the suction power with the slide on the bend (Fig. 11).
- If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park
the tube in a convenient position (Fig. 12).
1 Switch off the appliance and remove the mains plug from the wall socket.
2 Press the cord rewind button to rewind the mains cord (Fig. 13).
3 After use, store the crevice tool in its compartment (Fig. 9).
4 Put the appliance in upright position and insert the ridge on the oor nozzle into the storage
slot on the appliance (Fig. 14).
Always unplug the appliance before you empty the reusable dustbag.
- Empty the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.
even when the nozzle is not placed on the oor (Fig. 15).
1 Place your ngers under the release tab (1) and open the dustbag compartment (2) (Fig. 16).
2 Pull the dustbag xation tab (1) forward and remove the dustbag (2) (Fig. 17).
3 To empty the dustbag, shake the contents out over a dustbin
4 Pull the xation tab forwards (1) and place the empty dustbag between the ridges
(2) (Fig. 18).
Note: Make sure the arrow on the dustbag points upwards.
5 Release the dustbag xation tab to x the dustbag in position.
6 Close the cover (‘click’) (Fig. 19).
Note: You cannot close the cover if no dustbag has been inserted.
1 To detach the lter grille, push the tab downwards (Fig. 20).
2 Take out the exhaust lter. Shake out the dirt over a dustbin (Fig. 21).
3 Put back the exhaust lter (Fig. 22).
4 To reattach the lter grille to the vacuum cleaner, align the two ridges of the grille with the
two slots on the vacuum cleaner and close the grille (‘Click’) (Fig. 23).
Replace the dustbag if it can no longer be cleaned properly. Reuseable dustbags are available under
service number 9965 0001 6015.
8