User manual

Problem Solution
Dust escapes from the
vacuum cleaner.
The dust compartment may be full. Empty the dust compartment.
The dust compartment may not be attached to the appliance properly.
Attach the dust compartment to the appliance properly.
Perhaps the lter unit is not placed in the dust compartment properly.
Place the lter unit in the dust compartment properly.
The vacuum cleaner does
not work properly when
one of the accessories
is attached to the
small nozzle.
The dust compartment may be full. Empty the dust compartment.
The accessory may be clogged. Remove the obstruction from the
accessory.
The lter unit may be clogged. Clean the inner lter and the outer lter
(see chapter ‘Cleaning’).
The ‘brush blocked’ light
ashes red.
The roller brush is blocked. Clean the roller brush (see chapter ‘Cleaning’).
If you use the stick unit on soft, deep-pile carpet, the ‘brush blocked’ light
may also start to ash red, even though the roller brush is not blocked. In
this case, the suction power does not decrease and you can continue to
use the stick unit.
The appliance produces a
lot of noise.
There are solid parts inside the dust compartment. Empty the dust
compartment and clean the lter unit (see chapter ‘Cleaning’).
The oor nozzle joint may be clogged. Clean the oor nozzle joint (see
chapter ‘Cleaning’).
The appliance does not
pick up dirt effectively.
The roller brush is clogged. Clean the roller brush (see chapter ‘Cleaning’).
ENGLISH 21