User manual

2 Presstheoornozzlereleasebutton(1)todetachthestickfrom
theoornozzle(2).
3 Remove the large dirt particles from the joint.
4 Placethestickbackontotheoornozzle(‘click’).
Cleaning the roller brush
When the ‘brush blocked’ light starts to ash red, the roller brush is
blocked. If this happens, follow the steps below to clean the roller brush.
1 Switch off the appliance.
Tip: If the handheld vacuum cleaner is attached to the stick unit, press the
handheld vacuum cleaner release button (1) and remove the handheld
vacuum cleaner from the stick unit (2).
2 Turntheoornozzleupsidedown.
3 Rotate the roller brush until the cutting groove faces you.
4 Use a pair of scissors to cut the hairs, threads etc. that have collected
around the roller brush.
5 Removeuff,hairsandotherdirtfromtherollerbrush.
Note: You can also remove the roller brush for easier cleaning.
Removing the roller brush
1 Switch off the appliance.
2 Turntheoornozzleupsidedownandopentheretainer.
2
1
1
2
ENGLISH 15