User manual
6 Placetheinnerlterbackontothelterholder(1)andturnit
anticlockwise to attach it (2).
7 Placetheouterlterbackontothelterholder(1)andturnit
anticlockwise to attach it (2).
8 Putthelterunitbackintothedustcompartment.
Note: Make sure you insert the lter unit in the correct way.
9 To reattach the dust compartment, align the slot on the dust
compartment with the projection on the appliance. First attach the
bottom of the dust compartment (1) and then push the top of the
dust compartment towards the appliance (2) until it locks into place
(‘click’).
Cleaning the oor nozzle joint
The joint of the oor nozzle may get blocked by large dirt particles. Follow
the steps below to clean the joint.
1 Switch off the appliance.
2
1
1
2
ENGLISH14










