User manual

5 Ifnecessary,cleanthelterunit.Seesection‘Cleaningthelter
unit’.
6 Toreattachthedustcompartment,aligntheslotonthedust
compartmentwiththeprojectionontheappliance.Firstattachthe
bottomofthedustcompartment(1).Thenpushthetopofthedust
compartmenttowardstheappliance(2)untilitlocksintoplace
(‘click’)(Fig.18).

Make sure you clean the lter unit regularly.
1 Turntheouterlteranticlockwise(1)andremoveitfromthelter
holder(2)(Fig.19).
Leave the inner lter attached to the lter holder.
2 Cleantheinnerlterandtheouterlterwithabrushorwitha
normalvacuumcleaneriftheyareverydirty.
Note: If necessary , you can clean the inner lter and the outer lter in cold
or lukewarm water. Dry the inner and outer lter thoroughly before you use
the lter unit again.
3 Placetheouterlterbackontothelterholder(1)andturnit
clockwisetoattachit(2).(Fig.20)
4 Putthelterunitbackintothedustcompartment(Fig.21).
Note: Make sure you insert the lter unit in the correct way.
Storage
1 Youcanstorethevacuumcleanerandtheaccessoriesonthe
chargerorinthestoragebag.(Fig.22)
Replacement
We advise you to replace the inner lter after a prolonged period of use
or if you can no longer clean it properly.
ENGLISH 11