User manual



1 Attach the charger to the wall as shown in the gure. (Fig. 2)
If you attach the charger to the wall, the space between the screw holes
has to be 12cm.
2 You can also place the charger on a horizontal surface (e.g. a table
or desk) (Fig. 3).
3 Wind excess mains cord around the reel in the back of the charger
and pass the cord through the slot (Fig. 4).

Charge the appliance for at least 16 hours before you use it for the rst
time.
Tip: If you are not going to use the appliance for a longer period of
time, remove the adapter from the wall socket to save energy.
1 Make sure the appliance is switched off.
2 Put the adapter in the wall socket.
3 Place the vacuum cleaner on the charger (Fig. 5).
- Make sure you place the opening in the back of the vacuum cleaner
on the hook of the charger (Fig. 6).
, The charging light ashes to indicate that the appliance
is charging (Fig. 7).
, The charging light is on continuously to indicate that the appliance
is fully charged.

1 Push the on/off slide forwards to switch on the appliance (Fig. 8).
- If you want to use normal power, select speed 1.
- If you want to use high power, select speed 2.
2 Push the on/off slide backwards to switch off the appliance (Fig. 9).
8