User manual

Problem Solution
Dust escapes from
the vacuum cleaner.
The dust compartment may be full. Empty the
dust compartment.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
Perhapsthelterunitisnotplacedproperlyin
thedustcompartment.Placethelterunit
properly in the dust compartment.
The vacuum cleaner
doesnotwork
properlywhenone
of the accessories is
attached to the
nozzle.
The dust compartment may be full. Empty the
dust compartment.
The accessory may be clogged. Remove the
obstruction from the accessory.
Thelterunitmaybeclogged.Cleantheinner
lterandtheouterlter(seechapter
‘Cleaning’).
The surface is still
verywetafter
vacuuming liquid
(FC6142 only).
Perhaps the squeegee is not attached to the
nozzle.Attachthesqueegeetothenozzlewhen
youwanttosuckupliquid.
Perhaps you do not hold the appliance in the
rightway.Holdtheappliancewiththenozzle
pointingdownwardsatanangleof30°.Donot
tilt the appliance to one side and make sure the
squeegee touches the surface to be cleaned.
ENGLISH16