User Manual

6 Clean the inner lter and the outer lter with a brush or with a
normal vacuum cleaner if it is very dirty.
Note: If necessary, you can clean the inner lter and the outer lter in cold or
lukewarm water. Dry the inner and outer lter thoroughly before you use the
lter unit again.
7 Put the inner lter back into the outer lter (1) and turn it
clockwise to lock it (2) (Fig. 21).
8 Put the lter unit back into the dust compartment (Fig. 19).
Note: Make sure you insert the lter unit in the correct way.
9 To reattach the dust compartment, align the slot on the dust
compartment with the projection on the appliance. First attach the
bottom of the dust compartment (1) and then push the top of the
dust compartment towards the appliance (2) until it locks into
place (‘click’) (Fig. 16).

1 You can store the vacuum cleaner and the accessories on the
charger (Fig. 22).

We advise you to replace the inner lter after a prolonged period of use
or if you can no longer clean it properly.

1 Remove the lter unit from the dust compartment (Fig. 14).
2 Turn the outer lter anticlockwise (1) and remove it from the lter
holder (2) (Fig. 17).
3 Gently turn the inner lter anticlockwise (1) and remove it from
the lter holder (2) (Fig. 23).
4 Place a new inner lter on the lter holder (1) and turn it
clockwise to attach it (2) (Fig. 24).
12