User manual

Problem Solution
The surface is
still very wet
after vacuuming
liquid (FC6142
only).
Perhaps the squeegee is not attached to the nozzle.
Attach the squeegee to the nozzle when you want
to suck up liquid.
Perhaps you do not hold the appliance in the right
way. Hold the appliance with the nozzle pointing
downwards at an angle of 30°. Do not tilt the
appliance to one side and make sure the squeegee
touches the surface to be cleaned.
Liquid leaks
from the
appliance
(FC6142 only).
The lter unit may be wet. Make sure the inner lter
and the outer lter are dry before you place the
lter unit in the dust compartment.
You may not have put the lter unit in the dust
compartment. Never use the appliance without the
lter unit.
Perhaps the lter unit is not placed properly in the
dust compartment. Place the lter unit properly in
the dust compartment.
Perhaps the amount of liquid in the dust
compartment exceeds the maximum indication.
Empty the dust compartment immediately and dry it.
Never let the dust compartment ll up with liquid
beyond the maximum indication.
ENGLISH 17