User manual


This Philips appliance complies with all standards regarding
electromagneticelds(EMF).Ifhandledproperlyandaccordingtothe
instructions in this user manual, the appliance is safe to use based on
scienticevidenceavailabletoday.
Preparing for use
Placing the charger
1 To attach the charger to the wall:
Screw the wall mounting bracket to the wall with the screws supplied
with the appliance (Fig. 2).
Place the charger on the wall mounting bracket (1) and push the
chargerdownwardstoxit(2)(Fig.3).
Attach the nozzle & stick holder to the wall mounting bracket
(FC6095 only).
Screw the nozzle & stick holder to the wall with the screws supplied
with the appliance.
2 To use the charger without attaching it to the wall:
Place the charger on a level and horizontal surface (Fig. 4).
3 Slide the brush tool onto the crevice tool and place them in the
charger (Fig. 5).
4 FC6095only:insertthetelescopicstickandtheoornozzleinto
thenozzle&stickholder(‘click’)(Fig.6).
Charging the appliance
Caution: Make sure the appliance is switched off when you charge it.
Chargetheapplianceforatleast18hoursbeforeyouuseitfortherst
time.
Whenthecharginglightstartsashingduringoperation,thebatterypack
is running low and needs to be recharged.
Tip: If you are not going to use the appliance for a longer period of time,
remove the adapter from the wall socket to save energy.
-
-
-
-
-
ENGLISH8