English Figures Guarantee and service Francis Figures Quarantine et service aprons-vente Putsch Abbitdungen Guaranteeing und Service Netherlands Figure Quarantine en service Espalier Figures Niagara Italian Figure Niagara e servitor Dank Figure Grant og service Summit Kumquat Takeout ja hilltop Sven ska Figure Gar anti och service page 2 page 67,6869 pages page § page 67,6869 pages Sleet 17 Semite 67 68,89 Intense 70,7172 patina 25 patina patina's angina 32 vaginas 67,88,69 vaginas 70,71,72 patina 33 patine
Connection of loudspeakers, ses Fig. 6 # Ensure that the units switched off UPOWER® switch (3) not pressed)). # Pessimistic loudspeaker to be connected (8.0, the theft one, ). * Puttee marked wire in the red terminal ‘L', the non-marked wire in the black terminal 1. * In exactly the same way connect the wires from the other loudspeaker (in this case the right one, 'R’} with the twa other terminals, ie.
“TUNING DHOW' button For tuning 1o lower frequencies. @ ‘TUNING UP button For tuning to higher frequencies. @ "VOLUME DOWN' bunion For adjusting a lower volume. @ "VOLUME UP' button For adjusting a higher volume. function indicators *SOURCE SELECTION indication Light up according o the function selected, @ "TUNE®R' function selection button For playback from the tuner. @ "PHONON” function selection button For playback from the record player or from a source connected 1o the "AUX/TY terminals €.
~ by pressing "VOLUME UP" button [4] unto the desired volume is reached. If you can hear nothing Are the loudspeakers switched off by & headphone disconnected to socket @7 ~ I8 the correct function selection button pressed in? ~ I the selected sound source working properly? Evolutionist UP' button pressed long enough? Are the loudspeakers proper connected? When checking the loudspeakers, first switch off he unit! . Adjust the stereo balance using control . Adjust the tone using the contrails @. .
# Select a memory position number incl) with the bunions ‘PRESET DOWN’ (8, 'Prior the numeric buttons [Z]of the remote control unit, ® Press button ‘PRIG’ @ The indication -P-" will appearance display. The frequency Is now entered in the memory. Notes: ® A programmed frequency can be erased from the memory by programming & new frequency units place. # The memory information is ost if the unit is not switched on at least once per week, If this happens, the tuner must be reprogrammed.
terminals ) and the "TYPHOON' button @ must be pressed in. 2. Open the cassette compartment by passing the "EJECTOR button @ once, or twice it necessary. 4. Placentas cassette in the compartment, with the. open side downwards and the full spool on the toff (see Fig. 4). Warning: To avoid possible damage, do not use any protected cassettes (with tabs removed) for making a recording. They prevent the 'RECORD’ button 9 from functioning properly. Close the compartment.
DUBBING Copying from deck B to deck A 1. Select cassette playback by pressing the "TAPE’ button &, 2. Select the dubbing speed using the "HIGH SPEED DUBBING’ button €3: released for normal speed dubbing; pressed for HIGH SPEED dubbing. Note: Do not press this button during dubbing. 3 Press both buttons and inserts recorded cassette into deck B and a cassette which is suited for recording into deck A (fig. 4). 4.
