English page 2 Figures pages 46,60,51,52,53 Guarantee and service pages 54,55,56 Franglais page 9 Figures pages 48,50,61,52,83 Quarantine et service aprons-vente pages 54,5566 Putsch Islamist Abbildungen Semite 18 Intense 24,25 Intense 49,50,51,52,63 Garantielsistung und Service Intense §4,65,66 Netherlands Figure Gantlet en service Espalier Figures Niagara totalitarian Figure Niagara e servitor ene 50 43R, PESO D CHOIR DELETED patina 26 patina's 49,50,61,6253 patina's 54,55,56 patina 82 vaginas 49,80,61,52
For connecting a record player with a magneto dynamic pick-up element {for some versions a crystal element). © CD IN’ terminals For connecting a compact disc player {E) "AUX/TY IN' terminals To these you can connect, for example, the sound channel of a TV set, a separate tuner, receiver or recorder (only for playback!). & terminal for FM antenna, ohms {some parsons 2% screw, 300 chm.
@ 'PER-EQUALIZED RECORDING’ button For recordings, influenced with the EQUALIZER tone controls @ @ "VOLUME' control! For adjusting the volume. ® 'DYNAMIC BASS BOOST button For additionally amplifying the bass tones.
USING THE REMOTE CONTROL UNIT The buttons of the remote control unit correspond with the control bunions of the tuner, CD, and amplifier section of the combination. Depending on the version of your set, i.e. with a Compact Disc player, or Compact Disc changer, the remote contort unit will have 8 or 14 buttons, to mate with the features of your combination. * Gannet the socket 'REMOTE OUT @ (Fig. 1) to the 'REMOTE IN' or 'RCB IN' socket of your Compact Disc player.
Programming # Crass button PROGRAM' the remote control unit. The indication ‘PROGRAM’ will now appear in display ® Tune to the frequency of the transmitter to be programmed as described before under TUNING™. * Select a memory position number incl) with the buttons PRESET DOWN' (3, 'PRESET UP' @, or 'SKIP — /'SKIP 4’ {thereof remote control unit. # Press button ’PROGRAM’ @vr [s]of the remote control unit, The indication ‘PROGRAM’ will disappear from the display. The frequency is now entered In the memory.
the equalizer tone controls, when the LIED RECORDING’ button @ is not pressed. ® Press the 'PAUSE’ bunion @ * Press the 'RECORD' button &) The 'PLAY" button ¢ will also be depressed automatically. ® By releasing the ‘PAUSE’ buttonwood the correct moment you can start the recording, « Consult your dealer, if during the resorting transmitter a whistling sound is heard, ® For short pauses press the 'PAUSE” button &, Tress the 'PAUSE’ button € again to resume recording.
Fast winding # By pressing the "FWD' bunion &, & or the "REWIND' button €2, fast winding is possible in both directions. * Notwithstanding, press STOP buttonwood . End of the cassette When the end of the tape is reached during recording, playback and fast forward winding or rewinding, the pressed recorder buttons will automatically be released. GENERAL INFORMATION Further information required for making a tape recording # Each recording automatically erases any previous recording on the tape.
