Specifications

Directions for use
GB 9EM1A 3.
18
Record
Equipment connected with an aerial cable only : Select the channel number under which you have stored the test signal with the digit keys. Equipment connected to the back or to the right side of the TV Press the
AV
key repeatedly to select
AV1
,
CVI
,
AV2
or
FRONT
, according to
where you connected your equipment at the back or the right side of your TV. Select
CVI
to view the playback of DVD discs if you used the Component
Video Input sockets (
Y-Pb-Pr
and
AUDIO L
/
Mono
and
R
inputs).
If you want to change to TV channels? Enter the channel number of the TV channel which you want to watch with the digit keys.
To select connected equipment
A/CH
AV
MENU
SURF
SMARTSMART
CH
V
¬
i
bh
f◊
h
gU
XC
5
1
3
2
4
6
7
9
8
0
AV
PIP
PIP CH
UP DN
DOLBY V.
ACTIVE CONTROL
PROGRAM LIST
D
æ
q©
ßê
M
a
B
S
To record S-VHS quality, connect an S-VHS peripheral directly to the video recorder. Record a TV programme
&
Select the channel number on your video recorder.
é
Set your video recorder to record. See the handbook for your video recorder. Switching channel numbers on your TV does not disturb recording ! Record a programme on your video recorder connected to MONITOR OUT
from Audio/Video equipment connected to
AV1,AV2
or to sockets on the right side of the TV
&
Switch on the equipment.
é
Select the correct external on your TV and on your video recorder.
“
Set your video recorder to record. You record what you are watching on the screen. Do not switch channel numbers or do not switch off your TV when you are recording !
Record with your video recorder
&
Connect your camera or camcorder to sockets at the right side of your TV.
é
Connect the equipment to
VIDEO
2 and
AUDIO L
1 for mono
equipment.
“
For stereo equipment also connect
AUDIO R
1.
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the
S-VIDEO
input 3 (instead of
VIDEO
2) and
AUDIO
inputs 1.
Camera & camcorder
17
Connect Peripheral Equipment
&
Insert the plug into the headphone socket L at the right side of the TV.
é
Press ¬ on the remote control to switch off the internal loudspeakers
of the TV. The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5 mm jack. In the
SOUND
menu select
Headphone
to adjust the headphone volume and
balance.
L
Headphone
A
U
D
IO
V
ID
E
O
S
•V
ID
E
O
3
2
1
&
Connect the cables of your Y-Pb-Pr DVD player 1 to the
Y-Pb-Pr
input
AV1
in sockets on the TV.
For correct picture reproduction also connect to
VIDEO
.
(See the handbook of your DVD player.)
é
Connect the Audio left and right (only for stereo equipment) cables to the AUDIO L/
Mono and
R
input.
DVD-player
AV 2
in
AV 1
in
Monitor
out
COMPONENT VIDEO INPUT
VIDEO
L/Mono
R
Y
Pb
Pr
AUDIO
S-VIDEO
1 2
DVD