User manual

52 Settings
Making a Bluetooth connection
To make a Bluetooth connection, first of all, make
sure you switch on the Bluetooth feature in the
Power option. Then select Active device and press
L Ok.
Connection with an audio device
Press
L Ok. When the list of device appears,
select the one you want to make a connection with
it. As soon as you select a device and a connection
is made, you are prompted to enter a passkey in
order to pair with the device. This passkey is
supplied by the manufacturer of the other
Bluetooth device, refer to its documentation for
further information. The passkey feature ensures
that only legitimate connections are allowed to
connect either to your device or the selected
device.
If you do not use the Bluetooth feature for
some time, you should deactivate it in order to
conserve battery power.
Network settings
Select network
This menu allows you to select the service network
Settings Allow you to set the following
options: Visibility, My name,
Authentication, Audio path, Storage
location and Remote SIM mode.
About Display information of the
bluetooth device connecting with
your mobile
New Search Search the network available.
Select network Select a preferred network to be
used currently.
Selection mode Automatic: your phone will
automatically select and register
to an available network.
Manual: provides you with a list of
available network in the area.
Select the network you wish to
register with and press
L to
confirm.
You are recommended to select
Automatic.