User manual
Table Of Contents
- 1. Getting Started
- 2. Calling
- 3. Text or number Entry
- 4. Tools
- 5. Call History
- 6. Services
- 7. Games
- 8. Messages
- 9. User Profiles
- 10 • Multimedia
- 11. Phonebook
- 12. Settings
- Icons & symbols
- Precautions
- Troubleshooting
- The phone does not switch on
- Your phone doesn’t return to the idle screen
- The network symbol is not displayed
- The display doesn’t respond (or the display responds slowly) to key presses
- Your battery seems to over heat
- Your phone doesn’t display the phone numbers of incoming calls
- You can’t send text messages
- You have the feeling that you miss some calls
- The display shows INSERT SIM
- When attempting to use a feature in the menu, the mobile displays NOT ALLOWED
- Your phone is not charging
- Philips Authentic Accessories
- Trademark Declaration
- Specific Absorption Rate Information
- Limited warranty
- Declaration of conformity
Getting Started 7
If you enter an incorrect PIN code three times
in succession, your SIM card will be locked. To
unlock it, you must obtain the PUK code from
your network operator.
Charge the battery
Your phone is powered by a rechargeable battery.
A new battery is partially charged and a sound alert
will warn you when the battery reaches low. Once
you have installed the battery, you can start
charging the phone.
Plug in the charger connector as shown below.
Then plug the other end into a mains AC power
socket.
During charging, the charge indicators will scroll. It
takes around 3 hours to fully charge the battery.
When all the scroll bars are steady, the battery is
fully charged. You can then disconnect the charger.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off the
charger is to unplug it, so use an easily accessible
AC power socket.
Insert Micro-SD card
1.
Open the micro -SD card slot as shown
below.
2.
Insert the micro-SD card into the micro-SD
card slot, with golden contacts facing
downwards.










