User manual

Calling 9
- Access Phonebook
- Send and receive Messages
- Mute/Unmute the call
-Enable DTMF (the touch tone dialing system)
Adjust earpiece volume
During a call, press the + or - key to increase or
decrease the volume.
Speed Dial
Speed dial via preset numeric keys
You can set a maximum of 8 speed dial numbers, so
that a long press on the numeric key will dial the
number associated with that numeric key. You
need to set Enable Speed Dial and Set Number.
Speed dial via SIM phonebook
If you know the memory location number of the
contact you wish to call (for example: memory
location 5), you can simply enter 5# in idle mode to
display the pre-set contact, then press
( to call.
Speed dial via call logs
In idle mode, press ( to access Call Logs . Select a
number you wish to call and press
( to dial the
number.
The default setting of Speed Dial is Off. To
activate this function, you need to activate it in
the phone setup menu.
Handle multiple calls
You can handle two or more calls at the same time,
as well as make conference calls using your phone.
The availability of this feature is dependent on your
network operator and/or subscription.
Make a second call
You can make a second call when there is an active
call or with a call on hold. While on the phone, dial
the number (or select a contact from the
phonebook) and press
( . The first call is put on
hold and the second number is dialed. You can then
press
R to activate H-Free or L to access the
following options:
• Transfer to connect the two calls. You are
disconnected when the transfer is completed.
• End Held to disconnect the call on hold.
• End All Held to disconnect all of calls on hold.
• End All to disconnect all parties from the call.
Answer a second call
When you receive a second call while already in
communication, the phone will emit a beep tone