DVD Video Player DVD762/05 DVP762/00 User manual Visit us at www.p4c.philips.
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 Remove fuse cover and fuse. 3 Refit the fuse cover. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. If the fitted plug is not suitable for your jack outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp.
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
General Information Environmental Information Laser safety All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device.
CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR STRÅLING VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN VORSICHT GEFAHR VON SICHTBARER UND UNSICHTBARER LASERSTRAHLUNG BEI GEÖFFNETEM GEHÄUSE.
Contents Introduction Disc Operations Supplied accessories ....................................... 8 Care and safety information .......................... 8 Playable Discs ................................................. 18 Region Codes ................................................. 18 Playing discs ............................................... 18-19 Auto Eco Power standby mode ................ 19 Basic playback controls .................................
Contents DVD Menu Options General Setup menu ............................... 28-29 Locking/Unlocking the disc for viewing ... 28 Dimming system’s display screen .............. 28 Programming disc tracks ....................... 28-29 OSD Language ............................................... 29 Screen Saver - turning on/off ..................... 29 DivX(R) VOD registration code ............... 29 Audio Setup Menu ................................... 30-31 Digital Audio Setup ................................
Introduction Supplied accessories Scart cable (black) Remote Control and two AA batteries DIM SLEEP PREVIEW MUTE MODE SAVE ● Avoid high temperatures, moisture, water and dust – Do not expose the player, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight.) ● Avoid condensation problem – The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc.
Connections Connecting TV COMPONENT VIDEO IN S-VIDEO IN AUDIO OUT V (Pr/Cr) S-VIDEO IN SCART/RGB IN AUDIO OUT U (Pb/Cb) VIDEO IN VIDEO IN Y COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO OUT U (Pb/Cb) VIDEO IN AUDIO OUT S-VIDEO IN Y SCART/RGB IN VIDEO IN 1 2 1 DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital Y CVBS DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital Y CVBS L L R COAXIAL OPTICAL S-VIDEO Pr Pb TV OUT R STERE IMPORTANT! – You only need to make one video connection from the follo
Connections COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) COMPONENT VIDEO IN S-VIDEO IN AUDIO OUT U (Pb/Cb) V (Pr/Cr) AUDIO OUT VIDEO IN Y COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) U (Pb/Cb) VIDEO IN Y COMPONENT VIDEO IN S-VIDEO IN AUDIO OUT U (Pb/Cb) V (Pr/Cr) AUDIO OUT U (Pb/Cb) VIDEO IN VIDEO IN Y Y 1 DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital Y CVBS COAXIAL OPTICAL S-VIDEO 1 2 Pr Pb DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital 2 Y CVBS L L R R COAXIAL OPTICAL TV OUT STEREO
Connections Connecting the power cord RF coaxial cable to TV 2 Back of RF Modulator (example only) INT IN TO TV AUDIO IN R L VIDEO IN CH3 CH4 COMPONENT VIDEO IN AUDIO OUT S-VIDEO IN V (Pr/Cr) ~ AC MAINS U (Pb/Cb) VIDEO IN Y Antenna or Cable TV signal 1 DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital Y CVBS Y CVBS L R COAXIAL OPTICAL S-VIDEO Pr Pb COAXIAL OPTICAL S-VIDEO TV OUT IMPORTANT! – If your TV only has a single Antenna In jack (or labeled as
Connections Optional: Connecting Digital AV Receiver Optional: Connecting to an Audio System STEREO AV Receiver OPTICAL AUDIO OUT OPTICAL AUDIO OUT DIGITAL DIGITAL OR DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital Y CVBS DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital L Y CVBS R COAXIAL OPTICAL S-VIDEO Pr Pb TV OUT STEREO COAXIAL OPTICAL S-VIDEO Stereo system has Dolby Pro Logic or Right / Left Audio In jack 1 Select one of the video connections (CVBS VIDEO IN, S-VIDEO IN, SCART or COMPONENT VIDE
Functional Overview Front and Rear Panels 9 STOP – To stop playback T NEXT STANDBY-ON B – – To search or select next chapter or track To switch the DVD Player to Standby mode or ON 2; PLAY/PAUSE – To start or interrupt playback Disc tray PREV S OPEN/CLOSE / – – To search or select previous chapter or track Open/Close the disc tray Display – Digital Media Reader (Slot 2) – To slot in Compact Flash (Type 1) card Shows the current status of the DVD Player Digital Media Reader (Slot 1) – To slot i
Functional Overview Remote Control POWER B RETURN / TITLE – To go back to previous menu / show title menu – DISC MENU To switch the DVD player to standby mode or ON 0-9 numerical key pad – Enters or exits the disc contents menu – Switches on or off the playback control mode (for VCD version 2.
Getting Started Step 1: Inserting batteries into the Remote Control 3 1 Step 2: Setting up the TV IMPORTANT! Make sure you have completed all the necessary connections. (See pages 9-11 “Connecting TV”). 1 Turn on the TV and set to the correct 2 video-in channel. You should see the Philips DVD background screen on the TV. 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, 2 Usually these channels are between the following the indications (+-) inside the compartment.
Getting Started To deactivate Progressive manually cont’d If the progressive function is activated, but your TV does not support progressive function or YPbPr cable is not connected accordingly, there will be a blank screen. You can deactivated progressive function as below: 1 Press STANDBY ON on the front panel to switch on the DVD player. 2 Press OPEN/CLOSE on the front panel to open the disc tray. 3 Press 1 then, press MUTE on the remote control.
Getting Started Step 3: Setting language preference Setting the Audio, Subtitle and Disc menu language You can select the audio language spoken and subtitle languages in a video disc. If the language selected is not available on the disc, the disc’s default setting language will be used instead. You can select your preferred language settings.This DVD Player will automatically switch to the language for you whenever you load a disc.
Disc Operations IMPORTANT! – If the inhibit icon (ø or X) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction.
Disc Operations Auto Eco Power standby mode This is a power-saving feature, the system will automatically switch to Eco Power standby mode if you do not press any button within 30 minutes after a disc has stopped playing. Pressing STANDBY-ON or POWER key repeatedly will switch Eco Power standby mode to on/off. Basic playback controls Unless otherwise stated, all operations described are based on Remote Control use. Pausing playback 1 During playback, press PAUSEÅ.
Disc Operations Operations for video playback (DVD/VCD/SVCD) Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load in the disc. To select a playback feature or item ● Use 1 2 3 4 keys or numeric keypad (0-9) on the remote, then press OK to start playback.
Disc Operations Special DVD Features Special VCD & SVCD Features Playing a Title Playback Control (PBC) 1 Press DISC MENU. ➜ The disc title menu appears on the TV screen. 2 Use 341 2 keys or numeric keypad (0-9) to select a play option. 3 Press OK key to confirm. Camera Angle ● Press ANGLE repeatedly to select different desired angle. Changing the Audio Language For DVD ● Press AUDIO repeatedly to select different audio languages. For VCD with Playback Control (PBC) feature (version 2.
Disc Operations Preview Function 1 Press PREVIEW. 2 Press 34 to highlight {TRACK DIGEST}, {DISC INTERVAL} or {TRACK INTERVAL}. 3 Press OK to open one option. SELECT DIGEST TYPE: TRACK DIGEST DISC INTERVAL TRACK INTERVAL Track Digest This function will minimise the picture of every track in order to display every six of these tracks on the screen to help you know the content of every track on the disc.
Disc Operations Playing MP3/Picture disc (JPEG/ DivX/MPEG-4) During playback, you can; ● Press S / T to select another track/file in the current folder. IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 15 “Setting up the TV”). ● To select another folder from the current disc, press 1 to return to the root menu, then press 34 to make your selection and press OK to confirm. General Operation ● Press REPEAT continuously to access different ‘Play Mode’.
Disc Operations Special picture disc features IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 15 “Setting the TV”). 1 Load a picture disc (Kodak Picture CD, JPEG). ➜ For Kodak disc, the slide show will begin. ➜ For JPEG disc, the picture menu appears on the TV screen. 2 Press B to start the slide-show playback. 1 Preview Function (JPEG) This function shows the content of the current folder or the whole disc. Press STOP during playback.
Digital Media Reader Operations Digital Media Reader This DVD Player is equipped with a Digital Media Reader that enables you to: – View digital photos (JPEG) recorded from your digital camera’s memory card. – Play MP3, DivX and MPEG4 files from memory cards. Precaution on handling the memory card – Never pull out the memory card from the slot while it is in reading, writing operation. – Do not put any sharp objects into the memory card slot to avoid electric shock.
Digital Media Reader Operations Playing pictures or videos files from memory card 1 Remove the memory card from your digital camera and plug it into the digital media reader on your player. 2 Press MODE until “SLOT1” or “SLOT2” appears on the display panel. 3 Turn on the TV power and set to the correct Video In channel. (See page 15 “Setting the TV”). ➜ If the memory card is recognised, you can see 12 thumbnail pictures will appear on the TV.
Digital Media Reader Operations Saving files to memory card 1 Press SAVE to save files in the memory card without overwrite the existing filenames. ➜ A dialog box will appears on the TV screen. ● An error dialog box will appear on the TV screen when files cannot be saved into the faulty memory card. ERROR MESSAGE SLOT 1 SLOT 2 CANCEL 2 Use 3 or 4 to choose either SLOT1, ● When the capacity of the memory card used is full, ➜ A dialog box appears on the TV screen. SLOT2 or to cancel the save operation.
DVD Setup Menu Options This DVD Player setup is carried out via the TV, enabling you to customise the DVD Player to suit your particular requirements. Dimming player’s display panel You can select different levels of brightness for the display screen. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight {DISPLAY DIM}, then press 2. General Setup menu 1 In disc mode, press SYSTEM MENU. 2 Press 1 2 to select ‘General Setup’ icon. 3 Press OK to confirm. 100% – Select this for full brightness.
DVD Setup Menu Options If you want to remove a track 6 Use 1 2 3 4 keys to move the cursor to the track you want to remove. 7 Press OK to remove this track from the programme menu. To start programme playback 8 Use 1 2 3 4 keys to highlight {START} on the programme menu, then press OK. ➜ Playback will start with the selected tracks under the programmed sequence. 9 To exit programme playback Use 1 2 3 4 keys to highlight {EXIT} on the programme menu, then press OK.
DVD Setup Menu Options Audio Setup Menu 1 In disc mode, press SYSTEM MENU. 2 Press 1 2 to select ‘Audio Setup’ icon. 3 Press OK to confirm. - - AUDIO SETUP PAGE - ANALOG OUTPUT DIGITAL AUDIO SETUP CD UPSAMPLING NIGHT MODE Digital Audio Setup The options included in Digital Audio Setup are: ‘Digital Output’ and ‘LPCM Output’. 1 In ‘AUDIO SETUP PAGE’, press 34 to 2 3 4 highlight {DIGITAL AUDIO SETUP}, then press 2. Press the 34 keys to highlight an option. Enter its submenu by pressing 2.
DVD Setup Menu Options CD Upsampling This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you have activated the upsampling, the player will automatically switch to stereo mode. 1 In ‘AUDIO SETUP PAGE’, press 34 to highlight {CD UPSAMPLING}, then press 2. OFF Select this to disable CD-upsampling. 88.2 kHz (X2) Select this to convert the sampling rate of the CDs twice higher than the original. 176.
DVD Setup Menu Options Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback. Switching the YUV/RGB This setting allows you to toggle the output of the video signal between RGB (on scart) and Y Pb Pr (YUV). 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight {COMPONENT}, then press 2.
DVD Setup Menu Options Picture Setting This DVD Player provides three predefined sets of picture colour settings and one personal setting which you can define yourself. 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight {PICTURE SETTING}, then press 2. STANDARD Select this for standard picture setting. BRIGHT Select this will make the TV picture brighter. SOFT Select this will make the TV picture softer.
DVD Setup Menu Options Audio, Subtitle, Disc Menu These menus contain various language options for audio, subtitle and disc menu which may be recorded on the DVD. For details, see page 17. Restricting playback by Parental Control Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent.
DVD Setup Menu Options Changing the Password The same password is used for both Parental Control and Disc Lock. Enter your six-digit password when prompted on the screen. The default password is 136 900. 1 In ‘PREFERENCE PAGE’, press 34 to highlight {PASSWORD}, then press 2 to select {CHANGE}.
Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution No power – Check if the AC power cord is properly connected.
Troubleshooting Problem Solution The player does not respond to the Remote Control – Aim the Remote Control directly at the sensor on the front of the player. – Reduce the distance to the player. – Replace the batteries in the Remote Control. – Re-insert the batteries with their polarities (+/– signs) as indicated. Buttons do not work – To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. Player does not respond to some operating commands during playback.
Specifications TV STANDARD (PAL/50Hz) (NTSC/60Hz) AUDIO PERFORMANCE Number of lines Playback DA Converter DVD 625 Multistandard 525 (PAL/NTSC) SVCD VIDEO PERFORMANCE CVBS YPbPr RGB (SCART) 1Vpp — 75 ohm 0.7 Vpp — 75 ohm 0.7 Vpp — 75 ohm VIDEO FORMAT Digital Compression MPEG 2 for DVD,SVCD MPEG 1 for VCD MPEG-4/DivX DVD Horiz. resolution Vertical resolution 50Hz 720 pixels 576 lines 60Hz 720 pixels 480 lines VCD Horiz.
Glossary Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of widescreens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.).
Meet Philips at the Internet http://www.philips.
