Software Upgrade

Table Of Contents

1. Introduction

The upgrade version of this software is Version 37

__________________________________________________________________

2. Key Features added in this software version

This software version includes:

• Fix the lip sync problem and wrong turkey character with DIVX.

__________________________________________________________________

3. Software Upgrade Disc Preparation

Tools Required

You will need the following items :

· a personal computer

· a CD-R/RW drive and writing application software

· a blank CD-R

__________________________________________________________________

4. How to download the software to your computer

1) Right mouse button click on the file and click ‘Save Target As… ’ to save

the zip file into your PC.

2) Unzip the .zip file and extract files into your PC.

Do not change the filenames

__________________________________________________________________

PAGE 1
. Introduction The upgrade version of this software is Version 37 __________________________________________________________________ 2. Key Features added in this software version This software version includes: • Fix the lip sync problem and wrong turkey character with DIVX. __________________________________________________________________ 3.
PAGE 2
5. Software Version Verification Procedure It is important to write down the system version information of your set before you start the upgrade procedure. This information is also useful in case you need to call Philips Customer Care Center. 1. Power up the set. 2. Open tray by press "OPEN/CLOSE" button on the set or press and hold "STOP" button on the RC. 3. Press "DISPLAY" button on the Remote control. 4. The TV screen will shows: SD6.
PAGE 3
NOTE : Packet writing application for drag & drop copying cannot be used for creating an upgrade disc. Use only a dedicated CD writing application allowing ‘disc at once’ recording. No UDF setting as well. 2. Power up the set. 3. Open tray by press "OPEN/CLOSE" button on the set or press and hold "STOP" button on the RC. 4. Place upgrade CD-ROM onto tray and close. 5.