Software Upgrade

ManualsBrandsPhilips ManualsDVD PlayerDVP642K/78

1. Software Upgrade Version Release Notes

Introduction

The upgrade version of this software is Version 1109.

This software can be used to upgrade the following Philips DVD Players :

DVP642K/78

After you have completed the upgrade procedure, your DVD-player will typically perform better. What

improvements are made depends on the upgrade software you are using as well as the software that your

DVD-player contained before the upgrade.

Summary of content (4 pages)

PAGE 1
. Software Upgrade Version Release Notes Introduction The upgrade version of this software is Version 1109. This software can be used to upgrade the following Philips DVD Players : DVP642K/78 After you have completed the upgrade procedure, your DVD-player will typically perform better. What improvements are made depends on the upgrade software you are using as well as the software that your DVD-player contained before the upgrade.
PAGE 2
. Software Version Verification Procedure It is important to write down the system version information of your DVD -player before you start the upgrade procedure. This information is also useful in case you need to call Philips Customer Care Center. 1. Take note of your set model number on the white-label at the back of the set. 2. Press “ OPEN/CLOSE” to open the disc tray. 3. Press “ 5 6 9” “OK” button on the remote control. 4.
PAGE 3
. Software Upgrade Disc Preparation Tools Required You will need the following items : • a personal computer • a CD-R/RW drive and writing application software • a blank CD-R ________________________________________________________________________________________________ How to download the software to your computer Right mouse button click on the file and click ‘Save Target As… ’ to save the zip file into your PC. Unzip the .zip file and extract dvpxx.rom, dvpxxdv.rom and dvpxxEW.rom files into your PC.
PAGE 4
. Software Upgrade Procedure Note: Do not press any button or unplug the Mains/AC during upgrade. 1. Connect the Mains/AC cord to the wall socket. Press “STANDBY -ON” button on the front-panel or “ POWER” button on the remote control to activate the player. 2. Press “ 3. Insert the upgrade CD -ROM disc, label side up. 4. Press “ OPEN/CLOSE” to open the disc tray. OPEN/CLOSE” to close the disc tray. • TV screen will show : “DISC LOADING” “ FLASH” “DVPXX.