User Guide

Detailed playback features and additional functions are described in the

accompanying owner’s manual.

PREVIEW

MUTE

LABEL

Make sure your DVD Player and

TV are connected and turned on!

continue...

Playing a disc

1 Turn on the TV, then press STANDBY-ON

2 to turn on the

DVD Player.

2 Select the correct Video In mode at your TV.

You should see the blue Philips DVD background screen on the TV (if no disc

is in the DVD Player).

3 Press OPEN/CLOSE 0 on the front of the DVD Player and

load a disc. Press OPEN•CLOSE 0 again to close the disc

tray.

Make sure the disc label is facing up. For double-sided discs, the label of the

side to play should face up.

4 Playback will start automatically.

If a disc menu appears, use 3 4 1 2 on the remote to make a selection, then

press OK to confirm. Or, use the numeric keypad on the remote to select

numbered features. Follow the instructions given in the disc menu.

5 To stop playback, press STOP 9.

Region Codes

DVDs must be labeled for ALL regions or for

Region 1 in order to play on this DVD Player.

ALL

No picture?No picture?

No picture?

Check the AV (Audio/Video) mode on your TV.

* Usually this channel is between the lowest and highest channels and

may be called FRONT, A/V IN, or VIDEO.

*Or, you may go to channel 1 on your TV, then press the Channel down

button repeatedly until you see the Video In channel.

*Or, your TV remote control may have a button or switch that chooses

different video modes.

*Do not use channel 3 or 4 on the TV unless you are using an RF

modulator.

* See your TV manual for more details.