DVD VIDEO PLAYER 01-40 DVP640K_751 1 DVP 640K 7/04/2004, 4:49 8239 PM 300 30402
General Information Environmental Information Laser safety All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Contents Introduction Supplied accessories ....................................... 5 Care and safety information .......................... 5 Connections Connecting TV .............................................. 6-7 Using Composite Video jacks (CVBS) ........ 6 Using S-Video jack .......................................... 7 Using Component Video jacks (Pr Pb Y) .. 7 Using an accessory RF modulator .............. 8 Connecting the power cord ..........................
General Information ● Avoid high temperatures, moisture, water and dust – Do not expose the player, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight.) ● Avoid condensation problem – The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates.
Connections Connecting TV IN IN COMPONENT VIDEO IN COMPONENT VIDEO IN AUDIO IN S-VIDEO IN AUDIO IN Pr/Cr VIDEO IN IN Y COMPONENT VIDEO IN AUDIO IN S-VIDEO IN V (Pr/Cr) U (Pb/Cb) Pb/Cb VIDEO IN IN S-VIDEO IN Y COMPONENT VIDEO IN AUDIO IN S-VIDEO IN V (Pr/Cr) Pr/Cr U (Pb/Cb) VIDEO IN Pb/Cb Y VIDEO IN Y 1 2 2 VIDEO OUT Pb Pr L L Y 1 VIDEO OUT Pb Pr Y R R AUDIO OUT S-VIDEO OUT DIGITAL OPTICAL DIGITAL OUT AUDIO OUT IMPORTANT! – You only need to make one video connectio
Connections ANT IN RF coaxial cable to TV 3 IN Back of RF Modulator (example only) COMPONENT VIDEO IN AUDIO IN S-VIDEO IN V (Pr/Cr) ANT IN TO TV U (Pb/Cb) AUDIO IN R L VIDEO IN VIDEO IN IN Y COMPONENT VIDEO IN AUDIO IN S-VIDEO IN CH3 CH4 V (Pr/Cr) U (Pb/Cb) VIDEO IN Y 4 Antenna or Cable TV signal 1 2 1 2 VIDEO OUT Pb L R AUDIO OUT Pr L Y S-VIDEO OUT VIDEO OUT Pr Y R COAXIAL Pb OPTICAL DIGITAL OUT AUDIO OUT IMPORTANT! – Component Video connection provides higher picture
Connections Connecting the power cord COMPONENT VIDEO IN AUDIO OUT S-VIDEO IN V (Pr/Cr) ~ AC MAINS U (Pb/Cb) VIDEO IN Y VIDEO OUT L R AUDIO OUT S After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. When no disc is loaded, press STANDBY ON on the DVD Player front panel, “NO DISC” may appear on the display panel.
Connections Optional: Connecting to an Audio System Optional: Connecting Digital AV Receiver STEREO OPTICAL Receiver AUDIO IN OPTICAL AUDIO IN DIGITAL DIGITAL OR VIDEO OUT Pr Pb L L R AUDIO OUT VIDEO OUT R Y COAXIAL S-VIDEO OUT OPTICAL AUDIO OUT DIGITAL OUT Stereo system has Dolby Pro Logic or Right / Left Audio In jack 1 Select one of the video connections connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied).
Functional Overview Front and Rear Panels LEVEL – Microphone volume control MIC STANDBY-ON B – – For connecting microphone To switch the DVD Player to Standby mode or ON 2; PLAY/PAUSE – To start or interrupt playback Disc tray 9 STOP OPEN/CLOSE / – – To stop playback Open/Close the disc tray IR Sensor Display – Point the remote control towards this sensor – Shows the current status of the DVD Player STANDBY-ON OPEN/CLOSE STOP PLAY/PAUSE MIC LEVEL Mains (AC Power Cord) – Connect to a sta
Functional Overview Remote Control POWER B RETURN / TITLE – To go back to previous menu / show title menu – DISC MENU To switch the DVD player to standby mode or ON 0-9 numerical key pad – Enters the disc contents menu – Switches on or off the playback control mode (for VCD version 2.
Getting Started Step 2: Step 1: Inserting batteries into the Remote Control Setting up the TV IMPORTANT! Make sure you have completed all the necessary connections. (See pages 6-7 “Connecting TV”). 3 1 1 Turn on the TV and set to the correct 2 video-in channel. You should see the blue Philips DVD background screen on the TV. 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, following the indications (+-) inside the compartment. 3 Close the cover.
Getting Started If the progressive function is activated, but your TV does not support progressive function or YPbPr cable is not connected accordingly, there will be a blank screen. You can deactivated progressive function as below: 1 Press STANDBY ON on the front panel to switch on the DVD player. 2 Press OPEN/CLOSE on the front panel to open the disc tray. 3 Press numerical key pad ‘1’. ➜ The blue Philips DVD background appears on the TV screen.
Getting Started Step 3: Setting language preference Setting the Audio, Subtitle and Disc menu language You can select your own preferred language settings.This DVD system will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead. The OSD language in the system menu, will remain once selected.
Disc Operations IMPORTANT! – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction.
Disc Operations IMPORTANT! If the inhibit icon appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. Playing discs 1 Connect the power cords of the DVD Player and TV (and any optional stereo or AV receiver) to a power outlet. 2 Turn on the TV power and set to the correct Video In channel. (See page 12 “Setting up the TV”). 3 Press STANDBY-ON on the DVD Player front panel.
Disc Operations Mute (DVD/VCD/CD/MP3/DivX/JPEG) ● Press MUTE repeatedly to disable and enable the sound output. Resuming playback from the last stopped point (DVD/VCD/CD) Resume playback of the last 5 discs is possible, even if the disc was ejected or the power switched off. ● Load one of the last 5 discs. ➜ “LOADING” appears. ● Press PLAY B and the disc will be played back from the last point. To cancel resume mode ● In stop mode, press STOP 9 again.
Disc Operations Display (DVD/VCD) The Display function allows you to start playback at any chosen time on the disc. 1 During playback, press DISPLAY. ➜ The time edit box appears. 2 Press DISPLAY once, use 1 2 to highlight one of the option and use numeric key pad (0-9) to enter the number of the desired title (track) / chapter. 3 Press DISPLAY twice, use 2 to highlight the time option and use numeric key pad (0-9) to enter hours, minutes and seconds from left to right in the time edit box.
Disc Operations Special DVD Features Special VCD & SVCD Features Playing a Title Playback Control (PBC) 1 Press RETURN/TITLE. ➜ The disc title menu appears on the TV screen. 2 Use 341 2 keys or numeric keypad (0-9) to select a play option. 3 Press OK key to confirm. Camera Angle ● Press ANGLE repeatedly to select different desired angle. Changing the Audio Language For DVD ● Press AUDIO repeatedly to select different audio languages.
Disc Operations Preview (VCD/SVCD/CD) For VCD/SVCD ● At stop mode, press PREVIEW on the remote control. ➜ The preview menu will be displayed. 3. TRACK This function is used to divide a single track into nine parts by regular intervals and display them on one page to help you preview the selected track. 1. INTRO DVD player will playback every track for few seconds with full screen to obtain a summary of the disc content. 1 Press numerical key pad ‘1’. 2 Press STOP to quit previewing. 2.
Disc Operations Playing MP3/DivX/MPEG-4/ JPEG/Kodak Picture CD IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 12 “Setting up the TV”). General Operation Playback selection During playback, you can; ● Press S / T to select another file in the current folder. ● Use 1 2 3 4 on the remote to rotate/flip the picture files. ● Press ; to pause playback. 1 Load an MP3/DivX/MPEG-4/JPEG disc. ➜ The data disc menu appears on the TV screen.
Disc Operations Special MP3/JPEG/DivX features IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 12 “Setting up the TV”). Preview Function This function shows the content of the current folder or the whole disc. 1 Press PREVIEW during playback. ➜ Thumbnails of 9 pictures appears on the TV screen. (example for 9 thumbnail pictures display) 2 Press S / T to display the other 3 pictures on the previous/next page.
Karaoke Operations Playing Karaoke discs IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 12 “Setting up the TV”). General Operation 1 Connect a microphone (not supplied) to MIC on the front panel of the DVD player. STOP PLAY/PAUSE Vocal ● You can fade out the original vocal from a karaoke disc. ● Press VOCAL repeatedly to choose different audio modes. For DVD karaoke discs ➜ AUDIO 1 VOCAL, AUDIO 2 VOCAL, NO VOCAL.
DVD Menu Options Basic Operations Screen Saver 1 Press SYSTEM MENU in the STOP - - GENERAL SETUP PAGE - - mode to enter the Setup Menu. OSD LANGUAGE SCREEN SAVER SMART POWER 2 Press OK to enter the next level submenu or confirm your selection. OFF ON DISC LOCK PROGRAM DivX(R) VOD 3 Press 1 2 to enter the submenu or return to the previous menu. 4 Press 34 to highlight the desired menu. 5 Press SYSTEM MENU to quit the setup menu.
DVD Menu Options Disc Lock (DVD/VCD/CD) For VCD / CD PROGRAM - - GENERAL SETUP PAGE - OSD LANGUAGE SCREEN SAVER SMART POWER DISC LOCK PROGRAM DivX(R) VOD LOCK UNLOCK MAIN PAGE 01 09 17 02 10 18 03 11 19 04 12 20 05 13 21 06 14 22 07 15 23 08 16 24 PRESS PLAY TO START 1 Press 34 to highlight ‘Disc Lock’. 2 Enter its submenu by pressing 2. 3 Move the cursor by pressing 34 to For DVD PROGRAM T I T LE 0 1 / 2 6 NO. TT CH C H A P T E R 0 0 1 / 0 01 NO.
DVD Menu Options 3 Move the cursor by pressing the 34 keys - - DivX(R) REGISTRATION - Your registration code is : YDLAILYF Please use this code to register this player with the DivX(R) Video On Demand service. This will allow you to rent and purchase videos using the DivX(R) Video On Demand format. To learn more go to www.divx.com/vod DONE to highlight the selected item. ➜ LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.
DVD Menu Options LPCM Output Sound Mode If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. The digital sound effect allows you to select from various pre-set modes that control the frequency bands of sound optimise certain musical styles.
DVD Menu Options D.R.C. (Dynamic Range Control) TV Display High volume outputs are softened, enabling you to watch your favourite action movie without disturbing others at night. Set the aspect ratio of the DVD Player according to the TV you have connected. - - VIDEO SETUP PAGE - TV STANDARD - - AUDIO SETUP PAGE - DOWNMIX DIGITAL OUTPUT LPCM OUTPUT SOUND MODE REVERB MODE D.R.
DVD Menu Options Closed Captions Closed captions are data that are hidden in the video signal on specific discs, invisible without a special decoder. The difference between subtitles and closed captions is that subtitles are intended for hearing persons and captions are for the hearing impaired. For example, closed captions show sound effects (e.g., “phone ringing” and “footsteps”), while subtitles don’t.
DVD Menu Options - - REFER TO THE OWNER'S MANUAL - ACTIVATING PROGRESSIVE: 1. Ensure your TV has progressive 2. Connect with YPbPr (GBR) video 3. If there is a blank screen on normal wait 15 seconds for auto recover OK 2 3 - Move Brightness You can personalise your picture colour by adjusting brightness,contrast, hue and saturation.
DVD Menu Options Parental Rating explanations Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. 1-2 G – General Audience; recommended as acceptable for viewers of all ages.
DVD Menu Options - - PASSWORD CHANGE PAGE - - 3 Press OK, then press 1 to return to Preference Setup Page. OLD PASSWORD Caution! – When this function is activated, all settings will be reset to factory defaults except ‘Parental’ and ‘Password’. NEW PASSWORD CONFIRM PASSWORD PRESS OK TO CONFIRM 4 Enter the existing 4-digit code. 5 Enter the new 4-digit code. 6 Enter the new 4-digit code a second time to confirm. ➜ The new 4 digit code will be take effect.
Specifications TV STANDARD (PAL/50Hz) (NTSC/60Hz) AUDIO PERFORMANCE Number of lines Playback DA Converter DVD 625 Multistandard 525 (PAL/NTSC) SVCD VIDEO PERFORMANCE CVBS YPbPr 1Vpp — 75 0.7 Vpp — 75 VIDEO FORMAT Digital Compression MPEG 2 for DVD,SVCD MPEG 1 for VCD MPEG-4 DVD Horiz. resolution Vertical resolution 50Hz 720 pixels 576 lines 60Hz 720 pixels 480 lines VCD Horiz.
Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution No power – Check if the AC power cord is properly connected.
Troubleshooting Problem Solution The player does not respond to the Remote Control – Aim the Remote Control directly at the sensor on the front of the player. – Reduce the distance to the player. – Replace the batteries in the Remote Control. – Re-insert the batteries with their polarities (+/– signs) as indicated. Buttons do not work – To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. Player does not respond to some operating commands during playback.
Glossary Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.).
AUSTRALIA - Philips 3 years Manufacturers Warranty for Australia only These warranty conditions are valid for the following consumer electronics products: Colour Televisions,Video Cassette Recorders, CD Players and Recorders, DVD Players and Recorders,Audio Systems and Portable Audio. The benefits given to the purchaser by this warranty are in addition to all other rights and remedies which the purchaser has in respect of the product under the Trade Practices Act or other Commonwealth or State Law.
New Zealand - Guarantee and Service for New Zealand Thank-you for purchasing this quality Philips product. Philips New Zealand Ltd guarantees this product against defective components and faulty workmanship for a period of 12 months. Any defect in materials or workmanship occurring within 12 months from the date of purchase subject to the following conditions will be rectified free of charge by the retailer from whom this product was purchased. Conditions 1.
01-40 DVP640K_751 39 7/04/2004, 4:50 8239 PM 300 30402
HOTLINE Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C/A Dhaka - 1215 BANGLADESH Phone: (02)-812909 PHILIPS Authorized Service Centre 148 Fu Jian Road M 200001 Shanghai, CHINA Phone PHILIPS Authorized Service Centre 801 Dong Feng Road East Guangzhou 510080, CHINA Phone: (020)-7766990 PHILIPS Service Logistic Centre P.O.
