DVDVIDEO VIDEOPLAYER PLAYER DVD DVP5980 Read your Quick Start Guide and/or User Manual first for quick tips that make using your Philips product more enjoyable. Register your product and get support at www.philips.com/welcome 1_dvp5980MKll_12_eng 2.
1_dvp5980MKll_12_eng 2.
Deutsch --------------------------------------156 Deutsch Nederlands ----------------------------------206 Nederlands Español --------------------------------------106 Français Français -------------------------------------- 56 Español English ------------------------------------------6 English Index This product incorporates copyright protection technology that is protected by method claims of certain U.S.
General Information English Environmental Information Laser Safety All unnecessary packaging has been omitted. The packaging has been made easy to separate into two materials; cardboard (box) and polyethylene (bags, protective foam sheet). This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. NOTE: Pictures shown maybe different between countries.
English Language Code 5 1_dvp5980MKll_12_eng 2.
Contents English Care and Safety Information Setup ....................................................................................................................................................................... 8 Cleaning discs ....................................................................................................................................................... 8 General Information Accessories supplied ...............................................................................
Title/Chapter/Track selection .......................................................................................................................27 Time Search ........................................................................................................................................................27 Audio/Subtitle.....................................................................................................................................................27 Angle .....................
Care and Safety Information English DANGER! High voltage! Do not open the device. You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. Cleaning discs Some problems occur because the disc inside the player is dirty (frozen picture, sound disruptions, picture distortions). To avoid these problems, discs should be cleaned on a regular basis.
Accessories supplied Remote control and two AAA batteries English General Information Region codes This DVD player is designed to support the Region Management System. Check the regional code number on the disc package. If the number does not match the player’s region number (see table below), the player may be unable to playback the disc. Tips: – It may not be possible to play CD-R/RW or DVD-R/RW in all cases due to the type of disc or condition of the recording.
Connections English Connecting to television AUDIO IN VIDEO IN D B C A VIDEO OUT HDMI OUT COMPONENT VIDEO OUT DIGITAL OUT COAXIAL AUDIO OUT IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your television. – Connect the DVD player directly to the television. Option 1: Using SCART sockets – A SCART connection will let you use features both audio and video on the DVD player.
English Connections (continued) ANT IN RF coaxial cable to TV 2 Back of RF Modulator (example only) ANT IN TO TV VIDEO IN AUDIO IN R L CH3 CH4 ANT IN 1 4 VIDEO OUT HDMI OUT COMPONENT VIDEO OUT 3 DIGITAL OUT COAXIAL AUDIO OUT IMPORTANT! – If your television only has a single Antenna In socket (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the television.
Connections (continued) English Connecting the power cord VIDEO OUT HDMI OUT COMPONENT VIDEO OUT DIGITAL OUT COAXIAL After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. When no disc is loaded, press STANDBY-ON on the DVD player front panel. “NO DISC” may appear on the display panel. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
Connecting to a stereo system English Optional connections Connecting to a digital AV receiver STEREO AV Receiver AUDIO IN AUDIO IN DIGITAL VIDEO OUT HDMI OUT COMPONENT VIDEO OUT DIGITAL DIGITAL OUT COAXIAL VIDEO OUT AUDIO OUT Stereo system has right/ left Audio In sockets HDMI OUT COMPONENT VIDEO OUT DIGITAL OUT COAXIAL AUDIO OUT Receiver has a PCM, Dolby Digital or MPEG decoder A Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options
Optional connections (continued) English Connecting a USB Flash Drive or USB mass storage device USB extension cable (Optional accessory - not supplied) Using USB port You can only view the content of following supported USB devices through this DVD player. A Connect the supported USB device directly to the USB port on the front panel (as shown on the above illustration). B Press USB button on the remote control in order to view the files stored in the supported USB device.
English HDMI connections Connecting to a HDMI or DVI TV HDMI IN HDMI IN OR VIDEO OUT HDMI OUT COMPONENT VIDEO OUT DIGITAL OUT COAXIAL AUDIO OUT IMPORTANT! – HDMI connects untouched and uncompressed digital transmission for the highest and crispest sound or image quality. – It has plug and play capability using only one HDMI cable for both audio / video output. A Use a HDMI cable (not supplied) to connect the DVD player’s HDMI OUT to HDMI IN on the HDMI TV.
HDMI connections (continued) English Connecting to an Analog or Digital AV Receiver Connecting to a HDMI/DVI TV via a HDMI Repeater AV Receiver AUDIO IN HDMI DIGITAL HDMI IN IN B A OUT OR VIDEO OUT HDMI OUT COMPONENT VIDEO OUT DIGITAL OUT COAXIAL VIDEO OUT AUDIO OUT Use a HDMI cable (not supplied) or HDMI-DVI cable (not supplied) to connect the DVD player’s HDMI OUT to HDMI/DVI IN on the HDTV or DVI TV.
English Product Overview Front and Rear Panels USB Port – Input of the supported USB device STOP – Stops playback STANDBY-ON 2 – Turns on the player or switches to standby mode Disc Tray OPEN/CLOSE ç – Opens or closes the disc tray. Display panel – Shows information about the current status of the DVD player. PLAY/PAUSE u – Starts or pauses playback.
Product Overview (continued) English Remote Control DISC MENU – Enters or exits the disc contents menu – Switches on or off the playback control mode (for VCD 2.
Step 1 : Inserting Batteries Step 2 : Finding your viewing channel English Getting Started A Press STANDBY-ON 2 on the DVD player to turn it on. A Open the battery compartment. B Insert two batteries type R03 or AAA, following the indications (+ –) inside the compartment. C Close the cover. CAUTION! – Remove batteries if they are exhausted or if the remote is not to be used for a long time. – Do not use old and new or different types of batteries in combination.
Getting Started (continued) English Step 3 : Setting up Progressive Scan feature H Select { On }, then press OK to confirm. The menu will appear on the TV. ACTIVATING PROGRESSIVE SCAN: (for Progressive Scan TV only) The progressive scan displays twice the number of frames per second than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality. Before you start...
Step 4 : Selecting the matching colour system The colour system of the DVD player, disc and TV should match in order for the disc to play. Before changing the TV system, determine the colour system of your TV. E Select a setting and press OK. Follow the instructions show on the TV to confirm the selection. English Getting Started (continued) CHANGING PAL TO NTSC: 1.ENSURE THAT YOUR TV SUPPORTS NTSC STANDARD. 2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV , WAIT 15 SECONDS FOR AUTO RECOVERY.
Getting Started (continued) English Step 5 : Setting the language The language options are different depending on your country or region. It may not correspond to the illustrations shown on the user manual. On-screen display (OSD) language Select this to change the language of this DVD player screen display menu. The menu language (on-screen display) for the system will remain as you set it.
Playback from Disc Playable discs Using this DVD player, you can playback on the following discs: DVD Video (Digital Versatile Disc) DVD±RW (DVD Rewritable) Audio/Video format or MP3/WMA/JPEG/DivX® files. DVD±R (DVD Recordable) Audio/Video format or MP3/WMA/JPEG/DivX® files. CD-R (CD-Recordable) Audio/Video format or MP3/WMA/JPEG/DivX® files. CD-RW (CD-Rewritable) Audio/Video format or MP3/WMA/JPEG/DivX® files. Audio CD (Compact Disc Digital Audio) Video CD (Formats 1.0, 1.1, 2.
Playback Features English Starting disc playback A Turn on the TV to the correct program number for the DVD player (e.g. ‘EXT’, ‘0’, ‘AV’). B Press STANDBY-ON 2 to turn on the DVD player. C Press OPEN/CLOSE ç on the front of the DVD player. You can also hold down the STOP button on the remote control to open and close the disc tray. D Place a disc into the disc tray with the label facing up, then press OPEN/ CLOSE ç. For double-sided discs, load the side which you want to play facing up.
Operations for video playback Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load in the disc. To select a playback feature or item Use S T W X keys or numeric keypad (0-9) on the remote, then press OK to start playback. To access or remove the menu Press DISC MENU on the remote. Zooming in This function allows you to enlarge the picture on the TV screen and to pan through the enlarged picture.
Playback Features (continued) English Selecting various repeat functions Repeat play mode The repeat play options vary depending on the disc type. A While playing a disc, press REPEAT continuously to choose a repeat options.
Playback Features (continued) Using the OSD menu OSD menu shows the disc playback information (for example, title or chapter number, elapsed playing time, audio/ subtitle language), a number of operations can be done without interrupting disc playback. During playback, press DISPLAY on the remote control. The available disc information appears on the TV screen with the following sequence. MENU Title 01/01 Chapter 01/01 Audio 5.
Playback Features (continued) English For VCD/SVCD – Total Elapsed (elapsed playing time of current Disc) – Total Remain (remaining playing time of current Disc) – Single Elapsed (elapsed playing time of current Track) – Single Remain (remaining playing time of current Track) Preview The preview function allows you to reduce the picture of 6 tracks enough to display in a full screen. A Press S T to select {Preview}, then press X to access. The preview menu appears on the TV screen.
Special DVD Features English Playback Features (continued) Special VCD and SVCD Feature Playing a Title A Press DISC MENU. The disc title menu appears on the TV screen. B Use S T W X keys or alphanumeric keypad 0-9 to select a play option. C Press OK key to confirm. Changing the Audio Language For DVD Press AUDIO repeatedly to select different audio languages.
Playback Features (continued) English Advance features of the DivX® Ultra Playing a DivX® disc ® This DVD player supports the DivX movie playback that you download from your computer onto a CD-R/RW or DVD±R/RW (see page 36 for more information). A Load a DivX® disc. The data disc menu appears on the TV screen. B Press S T to select the folder and press OK to open the folder. C Press S T to select a track/file. D Press OK to confirm. Press SUBTITLE on the remote control will turn on or off the subtitle.
USB mass storage device When connecting a USB mass storage device to the DVD player, you can enjoy the device’s stored music through the DVD player. Compatible USB mass storage device: – USB flash memory (USB 2.0 or USB 1.1) – USB flash players (USB 2.0 or USB 1.1) – memory cards (requires an additional card reader to work with this DVD player). Compatibility of USB device Not all Portable audio/video players and Digital cameras are supported.
Playback Features (continued) English Playing from USB flash drive or USB memory card reader You can play or view the data files (JPEG, MP3 or WMA) in the USB flash drive or USB memory card reader through this DVD player. However, editing and copying the data files are not possible. A During disc playback, insert a USB mass storage device into the USB port (see page 14). ‘Press USB key to select device’ will appears on the TV screen. B Press USB on the remote control to access the data in the drive.
Playing MP3/WMA/JPEG/ Picture CD This DVD player can playback MP3, WMA, JPEG and Picture CD files on a personally recorded CD-R/RW disc, commercial CD or USB device. IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 19 ‘Finding your viewing channel’). General Operation A Load a disc or plug in an USB device. The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. The data disc menu appears on the TV screen.
Playback Features (continued) English Playback with multi-angles (JPEG) During playback, press S T W X to rotate the picture on the TV screen. S: flip the picture vertically by 180º T: flip the picture horizontally by 180º W: rotate the picture anti-clockwise by 90º X: rotate the picture clockwise by 90º Tips: – It may not be possible to play certain MP3/JPEG disc due to the configuration and characteristics of the disc or condition of the recording.
This DVD Player setup is carried out via the TV, enabling you to customize the DVD player to suit your particular requirement. Using the General setup menu A Press SETUP on the remote control. The system setup menu appears. General Setup Page Disc Lock OSD Language Sleep Lip Sync DivX(r) VOD Code Locking/Unlocking the disc for viewing Not all discs are rated or coded by the disc maker. You can prevent a specific disc from playing by locking the disc. Up to 20 discs can be locked.
DVD Menu Options (continued) English Sleep Sleep function allows you to turn off the DVD player automatically after a preset time. A In ‘General Setup Page’, press S T to select { Sleep }, then press X. DivX® VOD registration code DivX® VOD registration code allows you to rent and purchase movies using the DivX® service from the internet. For more information, visit website; http://vod.divx.com { 15 Mins } Turn off the DVD player after 15 minutes.
Using the Audio setup menu A Press SETUP on the remote control. The system setup menu appears. Audio Setup Page Analog Output Digital Audio Setup HDMI Audio Setup Sound Mode CD Upsampling Night Mode B Press W X to select { Audio Setup Page }. C Press S T to select an item, then press X to access. Example: { Night Mode } The options for the selected item appears. If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.
DVD Menu Options (continued) English Digital Output Set the Digital Output according to your optional audio equipment connection. { All } Select this if the connected device has a built-in multichannel decoder that supports one of the multichannel audio format (Dolby Digital, MPEG-2). { PCM Only } Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and MPEG-2 multichannel signals to PCM (Pulse Code Modulation).
Sound Mode The options included in Sound Mode Setup are {3D}, {Movie Mode}, {Music Mode}. A In ‘Audio Setup Page’, press S T to select { Sound Mode }, then press X. B Press S T to select an item, then press X to access. C Use S T to select a setting and press OK to confirm. 3D This function provides a virtual surround sound experience using just two speakers. { Off } – { Living Room } – { Hall } – { Arena } – { Church } Movie Mode Provides various Movie sound effects.
DVD Menu Options (continued) English Using the Video setup menu A Press SETUP on the remote control. The system setup menu appears. Video Setup Page TV Type TV Display Progressive Picture Setting Component HD JPEG HDMI Video Setup B Press W X to select { Video Setup Page }. C Press S T to select an item, then press X to access. Example: { TV Type } The options for the selected item appears.
Progressive In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player’s YPbPr jacks to your TV that supports the progressive video input. Otherwise, a distorted picture will appear on the TV. For proper progressive scan set up, see page 20. A In ‘Video Setup Page’, press S T to select { Progressive }, then press X. Picture Setting This DVD player provides four predefined sets of picture color settings.
DVD Menu Options (continued) English D Press S T to highlight one of the following options. BRIGHTNESS Increase the value to brighten the picture or vice versa. Choose zero (0) for average setting. CONTRAST Increase the value to sharpen the picture or vice versa. Choose zero (0) to balance the contrast. SHARPNESS Increase the value to enhance the sharpness in your picture or vice versa. Choose zero (0) for average setting. COLOR Increase the value to enhance the colour in your picture or vice versa.
HD JPEG You can enjoy untouched and uncompressed pictures as it’s original resolution via your HDMI connection (see page 15). A In ‘Video Setup Page’, press S T to select { HD JPEG }, then press X. { On } Displays picture with high definition, the JPEG picture will be upscaled. { Off } Displays picture with standard definition. B Use S T to select a setting and press OK to confirm. Tip: – This option only available for JPEG picture disc.
DVD Menu Options (continued) English Tips: – If no display or distorted pictures appears on the TV screen due to unsupported resolution, reconnect any available video output to your DVD player and re-adjust the resolution setting. – When changing the resolution of the DVD player, the HDMI TV will automatically change to fit the DVD player resolution. – {Progressive} and {TV Type} options will not be available when a HDMI cable is connected and the DVD player will turn to HDMI mode automatically.
Wide Screen Format If the 4:3 picture needs output to the 16:9 TV, you could select the following output format. { Super Wide } The left and right side of a 4:3 video picture will be scaled in the wide direction, but the center portion of screen is stretch less then the side. { 4:3 Pillarbox } The left and right side of a 4:3 video picture will be filled with black edge on a 16:9 TV screen. { Off } No ratio adjustment.
DVD Menu Options (continued) English Subtitle/Audio/Disc Menu These menus contains various language options for audio, subtitle and disc menu which may be recorded on the DVD. For details, see page 22. Parental Depending on the DVD, you may be asked to change the parental level while playing the disc. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children, or have certain discs played with alternative scenes.
PBC You can set the PBC to {On} or {Off}. This feature is available only on SVCD or Video CD 2.0 with playback control (PBC) feature. For details, see page 29. Changing the Password You need to enter your six-digit password to play a prohibited disc or if prompted for a password. The same default password is used for both Parental and Disc Lock. MP3/JPEG Menu MP3/JPEG Navigator can be set only if the disc is recorded with menu. It allows you to select different display menu for easy navigation.
DVD Menu Options (continued) English Setting the DivX® subtitle font You can set the font type that supports the recorded DivX® subtitle. A In ‘Preference Page’, press S T to select { DivX® Subtitle }, then press X. { Standard } Albanian, Danish, Dutch, English, Finnish, French, Gaelic, German, Italian, Kurdish (Latin), Norwegian, Portuguese, Spanish Swedish and Turkish. { Central European } Albanian, Croat, Czech, Dutch, English, German, Hungarian, Irish, Polish, Romanian, Slovak, Slovene and Sorbian.
English Others Software upgrade Periodically Philips will issue software upgrade to enhance your user experience. IMPORTANT! – Power supply must not be interrupted during upgrade! To check the current software version of this DVD player; A Press OPEN/CLOSE ç on the DVD player to open the disc tray. The disc tray will open. B Press numeric keypad ‘55’ on the remote control. The file name of the software installed in the DVD player appears on the TV screen.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution No power. – Press STANDBY-ON button on the front of the DVD player to turn on the system.
Problem Solution The aspect ratio of the screen cannot be changed. – The aspect ratio is fixed on the DVD disc. – Depending on the TV, it may not be possible to change the aspect ratio. Not able to select some items in the setup/system menu. – Press STOP button twice before selecting the setup/ system menu. – Depending on the disc availability, some menu items cannot be selected. The DVD player does not start playback. – Insert a readable disc with the playback side facing down.
Troubleshooting (continued) English Problem Solution The contents of the USB flash drive cannot be read – The USB flash drive format is not compatible with the DVD player. – Drive is formatted with a different file system. (e.g. NTFS) Slow operation of the USB flash drive – Big file size or high solution USB flash driver takes longer time to read and display on the TV screen.
TV STANDARD(PAL/50Hz) (NTSC/60Hz) Number of lines 625 525 Playback Multistandard (PAL/NTSC) VIDEO PERFORMANCE Video DAC 12 bit, 108 MHz YPbPr 0.7 Vpp ~ 75 ohm Video Output 1Vpp ~ 75 ohm RGB (SCART) 0.7 Vpp ~ 75 ohm VIDEO FORMAT Digital MPEG 2 for DVD,SVCD Compression MPEG 1 for VCD DivX® DVD 50Hz Horiz. resolution 720 pixels 1920 pixels Vertical resolution 576 lines 1080 lines 60Hz 720 pixels 1920 pixels 480 lines 1080 lines VCD 50Hz Horiz.
Frequently Asked Questions (USB) English Why does it take so long to display the contents on my USB device? – This could be due to the large numbers of files (>500 files/folders) or size of the files (>1MB.) – There could be other non-supported files in the device that the system is trying to read/display. What if un-supported devices (e.g. USB mouse, keyboards) are plugged into the player? – The device may cause the player to be unstable. Remove the unsupported device and unplug the mains cord.
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.).
