DVD VIDEO PLAYER 01-30 DVP522_69 1 DVP 522 8239 24/02/2004, 2:10 PM 300 32141
General Information Environmental Information Laser safety All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device.
English Index English --------------------------------------- 6 -------------------------------- 31 This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Contents English Introduction Supplied accessories ....................................... 5 Care and safety information .......................... 5 Connections Connecting TV .............................................. 6-7 Using Component Video jacks (Y Pb Pr) .. 6 Using Composite Video jack (CVBS) ......... 6 Using S-Video jack .......................................... 7 Using an accessory RF modulator .............. 7 Connecting the power cord ..........................
● Avoid high temperatures, moisture, water and dust – Do not expose the player, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight.) ● Avoid condensation problem – The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates.
Connections English Connecting TV COMPONENT VIDEO IN COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) S-VIDEO IN V (Pr/Cr) AUDIO IN VIDEO IN VIDEO IN COMPONENT VIDEO IN V (Pr/Cr) S-VIDEO IN COMPONENT VIDEO IN Y AUDIO IN AUDIO IN U (Pb/Cb) U (Pb/Cb) V (Pr/Cr) S-VIDEO IN Y AUDIO IN U (Pb/Cb) U (Pb/Cb) VIDEO IN VIDEO IN Y Y 1 Y VIDEO OUT R Pr COMPONENT VIDEO OUT AUDIO OUT IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of y
English Connections RF coaxial cable to TV 2 Back of RF Modulator (example only) COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO IN ANT IN TO TV VIDEO IN AUDIO IN R L U (Pb/Cb) VIDEO IN COMPONENT VIDEO IN V (Pr/Cr) S-VIDEO IN CH3 CH4 Y AUDIO IN U (Pb/Cb) VIDEO IN Y 1 2 Y VIDEO OUT COAXIAL DIGITAL OUT AUDIO OUT S-VIDEO OUT R Pr COMPONENT VIDEO OUT IMPORTANT! – S-Video connection provides better picture quality.This option must be available on your TV.
Connections English Connecting the power cord COMPONENT VIDEO IN AUDIO IN S-VIDEO IN V (Pr/Cr) ~ AC MAINS U (Pb/Cb) VIDEO IN Y Y VIDEO OUT Pb MAINS S-VIDEO OUT Pr COMPONENT VIDEO OUT COAXIAL DIGITAL OUT AUDIO O After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. When no disc is loaded, press STANDBY ON on the DVD Player front panel, “NO DISC” may appear on the display panel.
Connections Optional: Connecting to an Audio System English Optional: Connecting Digital AV Receiver STEREO AV Receiver OPTICAL AUDIO IN AUDIO IN DIGITAL Y VIDEO OUT COAXIAL Pr S-VIDEO OUT R Pr COAXIAL DIGITAL OUT COMPONENT VIDEO OUT AUDIO OUT Stereo system has Dolby Pro Logic or Right / Left Audio In jack 1 Select one of the video connections (VIDEO IN, S-VIDEO IN or Component Video (Y Pb Pr) jack depending on the options available on your TV.
Functional Overview English Front and Rear Panels 2; PLAY/PAUSE – To start or interrupt playback 9 STOP – To stop playback STANDBY-ON B – IR Sensor To switch the DVD Player to Standby mode or ON – Point the remote control towards this sensor Disc tray Display OPEN/CLOSE / – – Shows the current status of the DVD Player Open/Close the disc tray STANDBY-ON OPEN/CLOSE STOP PLAY/PAUSE Audio Out (Left/Right) – Connect to AUDIO inputs of an amplifier, receiver or stereo system Mains (AC Power Cor
Functional Overview English Remote Control POWER B RETURN / TITLE – To go back to previous menu / show title menu – DISC MENU To switch the DVD player to standby mode or ON 0-9 numerical key pad – Enters or exits the disc contents menu – Switches on or off the playback control mode (for VCD version 2.
Getting Started Step 2: English Step 1: Inserting batteries into the Remote Control Setting up the TV IMPORTANT! Make sure you have completed all the necessary connections. (See pages 6-7 “Connecting TV”). 3 1 1 Turn on the TV and set to the correct 2 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, following the indications (+-) inside the compartment. 3 Close the cover.
Selecting the colour system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match. - - Video Setup Page - TV Type TV Display Closed Captions Angle Mark Progressive Smart Picture Picture Setting Helpful Hint: – Before changing the current TV Type setting, ensure that your TV supports the ‘selected TV Type’ system.
Getting Started English Step 3: Setting language preference You can select your own preferred language settings.This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead. The OSD language in the system menu will remain once selected.
IMPORTANT! – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. IMPORTANT! If the inhibit icon (ø) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time.
Disc Operations English Using the Disc Menu Basic playback controls Depending on the disc, a menu may appear on the TV screen once you load the disc. Unless otherwise stated, all operations described are based on the use of Remote Control. To select a playback feature or item ● Use the 1 2 3 4 or numeric keypad (0-9) on the Remote Control, then press PLAY B to start playback. To access or exit from the menu ● Press DISC MENU on the Remote Control. For VCD with Playback Control (PBC) feature (version 2.
Disc Operations REPEAT CHAPTER (DVD) – to repeat playback of the current chapter. REPEAT TRACK/TITLE (CD/SVCD/VCD/ DVD) – to repeat playback of the current track (CD/SVCD/VCD)/title (DVD). REPEAT ALL – to repeat playback of all the disc and all the programmed tracks. SHUFFLE – to repeat playback at random order. REPEAT OFF – to cancel the repeat mode. Helpful Hint: – REPEAT function is not available for VCD 2.0 when PCB is on.
Disc Operations English 2 Press 3 4 to select the PREVIEW type, Special disc features then press OK. ➜ The picture of each segment will appear on the screen. Playing a Title (DVD) 1 Press DISC MENU. ➜ The disc title menu appears on the TV screen. 2 Use 341 2 keys or numeric keypad A B C D E F (0-9) to select a play option. 3 Press OK key to confirm.
Disc Operations Special JPEG features English Playback selection During playback, you can; ● Press S / T to select another file in the current folder. ● Use 1 2 3 4 on the remote to rotate/flip the picture files. ● Press ; repeatedly to pause/resume playback. Preview Function (JPEG) This function shows the content of the current folder or the whole disc. 1 Press PREVIEW during playback. ➜ Thumbnails of 12 pictures appears on the TV screen.
System Menu Options English Basic Operations Program (not for Picture CD/MP3) To select favourite tracks/chapters playback in preferred sequence. 1 Press SYSTEM MENU to enter the Setup Menu. 2 Press OK to enter the next level Program:Chapter(01-12) 1 12 2 01 3 05 4 5 submenu or confirm your selection. 3 Press 1 2 to enter the submenu or return to the previous menu. 4 Press 34 to highlight the desired menu. To exit from the menu Press SYSTEM MENU or select ‘Exit Setup Menu’ and then press OK.
Audio Setup Page Digital Audio Setup The options included in Audio Setup page are: ‘Speaker Setup’, ‘Digital Audio Setup’, ‘Dolby Digital Setup’, ‘Equalizer’ and ‘3D’. The options included in Digital Audio Setup are: ‘Digital Output’ and ‘LPCM Output’. 1 Press SYSTEM MENU. 2 Press 1 2 to select the ‘Audio Setup’ page. English System Menu Options 1 Press the 34 keys to highlight an option. 2 Enter its submenu by pressing 2. 3 Move the cursor by pressing the 34 keys to highlight the selected item.
System Menu Options English Dolby Digital Setup Equalizer The options included in Dolby Digital Setup are: ‘Dual Mono’ and ‘Dynamic’. The option included in Equalizer is: ‘Sound Mode’. 1 Press the 34 keys to highlight an option. 2 Enter its submenu by pressing 2. 3 Move the cursor by pressing the 34 keys to highlight the selected item. 1 Press 34 to highlight ‘Sound Mode’. 2 Enter its submenu by pressing 2. 3 Move the cursor by pressing the 34 keys to highlight the selected item.
3D Processing TV Display The option included in 3D Processing is: ‘Reverb Mode’. Set the aspect ratio of the DVD Player according to the TV you have connected. 1 Press 34 to highlight ‘Reverb Mode’. 2 Enter its submenu by pressing 2. 3 Move the cursor by pressing the 34 keys to highlight the selected item. 1 Press 34 to highlight ‘TV Display’. 2 Enter its submenu by pressing 2. 3 Move the cursor by pressing 34 to highlight the selected item.
System menu Options English Closed Captions Closed captions are data that are hidden in the video signal of some discs. Captions are different from subtitles because captions hearing are impaired by showing the sound effects (e.g., “phone ringing” and “footsteps”), while subtitles do not. Before you select this function, please ensure that the disc contains closed captions information and your TV set also has this function. 1 Press 34 to highlight ‘Closed Captions’. 2 Enter its submenu by pressing 2.
Picture Setting Preference Page The options included in Picture Setting Setup page are: ‘Sharpness’, ‘Brightness’ and ‘Contrast’. The options included in Preference page are: ‘Audio’, ‘Subtitle’, ‘Disc Menu’, ‘Parental’, ‘Password’ and ‘Default’. 1 Press the 34 keys to highlight an option. 2 Enter its submenu by pressing 2. 3 Move the cursor by pressing the 34 keys English System Menu Options 1 Press SYSTEM MENU. 2 Press 1 2 to select the ‘Preference Page’. to highlight the selected item.
System Menu Options English Parental - cont’d Helpful Hint: – Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover. The rating level feature does not work for such Discs. Rating explanations 1 KID SAFE – Kids material; recommended especially for children and viewers of all ages. Password This feature is used for Parental Control. Enter your four digit password when a hint is displayed on the screen. The default password is 1009.
TV STANDARD (PAL/50Hz) (NTSC/60Hz) AUDIO PERFORMANCE Number of lines Playback DA Converter DVD 625 Multistandard 525 (PAL/NTSC) SVCD VIDEO PERFORMANCE DA Converter Component video output (480i/p) Video Output S-Video Output 12 bit, 54mHz Y: 1 Vpp into 75 ohm PbPr: 0.7 Vpp into 75 ohm 1Vpp — 75 ohm Y: 1Vpp — 75 ohm C: 0.3 Vpp — 75 ohm AUDIO FORMAT Digital MP3(ISO 9660) Mpeg Dolby Digital PCM 24 bit, 96kHz fs 96 kHz fs 48 kHz fs 48 kHz fs 44.1kHz fs 44.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution No power – Check if the AC power cord is properly connected.
Troubleshooting Solution The player does not respond to the Remote Control – Aim the Remote Control directly at the sensor on the front of the player. – Reduce the distance to the player. – Replace the batteries in the Remote Control. – Re-insert the batteries with their polarities (+/– signs) as indicated. Buttons do not work – To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. Player does not respond to some operating commands during playback.
Glossary English Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.).
Language Code Inupiaq Irish Íslenska Italiano Ivrit Japanese Javanese Kalaallisut Kannada Kashmiri Kazakh Kernewek Khmer Kinyarwanda Kirghiz Komi Korean Kuanyama; Kwanyama Kurdish Lao Latina Latvian Letzeburgesch; Limburgan; Limburger Lingala Lithuanian Luxembourgish; Macedonian Malagasy Magyar Malayalam Maltese Manx Maori Marathi Marshallese Moldavian Mongolian Nauru Navaho; Navajo Ndebele, North Ndebele, South Ndonga Nederlands Nepali Norsk Northern Sami North Ndebele Norwegian Nynorsk; Occitan; Provencal
HOTLINE English Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C/A Dhaka - 1215 BANGLADESH Phone: (02)-812909 Consumer Relation Centre 7 Justice Chandra Madhab Road Clacutta 700 020 INDIA Phone: (033)-747333 Customer Relation Centre 3, Haddows Road Madras 600 006 INDIA Phone: (044)-8292221 PHILIPS Authorized Service Centre 148 Fu Jian Road M 200001 Shanghai, CHINA Phone: (02)-812909 Customer Relation Centre 68, Shivaji Marg New Delhi 110 015 INDIA Phone: (011)-5469692 PHILIPS Authoriz
