Software Upgrade

ManualsBrandsPhilips ManualsDVD PlayerDVD player

Table Of Contents

1 Introduction

The upgrade version of this software is Version 21

This software can be used to upgrade the following Philips DVD Players:

• DVP5100K/75

After you have completed the upgrade procedure, your DVD player will typically

perform better. What improvements are made depends on the upgrade software

you are using as well as the software that your DVD player contained before the

upgrade.

2 Key Features

This software version includes:

Fix for Zoom icon that does not disappear

3 Preparations

You will need the following items:

• Personal Computer

• CD-R/RW drive and writing application software

• 1x blank CD-R

4 Software Version Verification Procedure

It’s important to write down the Software Version information of your DVD player

before you start the upgrade procedure. This information is also useful in case

you need to call Philips Customer Care Center.

• To view the software version

1. Press Open to open tray

2. Press keys 5, 5 successively

5 Download Software

1. Click the link to download Firmware upgrade to your PC.

1 of 4

Summary of content (4 pages)

PAGE 1
Introduction The upgrade version of this software is Version 21 This software can be used to upgrade the following Philips DVD Players: • DVP5100K/75 After you have completed the upgrade procedure, your DVD player will typically perform better. What improvements are made depends on the upgrade software you are using as well as the software that your DVD player contained before the upgrade.
PAGE 2
Philips Electronics Singapore Software Upgrade Instruction 2. Unzip the .zip file 6 i) Do not rename the filename ii) Visit http://www.winzip.com/ for downloads if you cannot open the .zip file. Burning upgrade software on CD-R or CD-RW 1. Extract the files by unzipping the zipped file. 2.
PAGE 3
Philips Electronics Singapore Software Upgrade Instruction 1. Insert a blank CD-R or CD-RW disc. 2. Open Nero Express and select “Data disc”. 3. Click on the “Add” tab to browse. 4. Select the unzipped files 5. Click “Add” and “Finished”. 6. Click on “Next” and follow by “Burn”. The firmware upgrade will now be burned onto the disc. Using Easy CD Creator 1. Insert a blank CD-R or CD-RW disc 2. Open Easy CD Creator 3. Select the unzipped files from the browser on top. 4.
PAGE 4
Philips Electronics Singapore 7 Software Upgrade Instruction Steps to Upgrade Software 1. Power on the set and put in the disc. 2. A message will be displayed on the OSD after the upgrade file is recognized. 3. Follow the instruction displayed on the TV Screen – Press “OK” to upgrade (if applicable) 4. After reading the file, the disc will be ejected 5. Remove the disc, but DO NOT close the tray 6. Wait approximately 3-5 minutes for the software to be upgraded 7.