Register your product and get support at www.philips.
LASER CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM. Italia DICHIARAZIONE DI CONFORMITA’ Si dichiara che l’apparecchio DVP4320, Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n.548.
1 Important Safety and important notice Trademark notice 4 4 4 2 Your product Feature highlights Product overview 5 5 5 3 Connect Connect video cables Connect audio cables Route audio to other devices Connect USB flash drive Connect power 7 7 8 8 8 9 4 Get started Prepare the remote control Find the correct viewing channel Select menu display language Turn on progressive scan Use Philips EasyLink 9 9 9 9 9 10 5 Play Play a disc Play video Play music Play photo Play from USB flash drive 10 10 10
1 Important Safety and important notice Warning • Risk of overheating! Never install the product in a • • • • • • confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Never place the product, remote control or batteries near naked flames or other heat sources, including direct sunlight. Only use this product indoors. Keep this product away from water, moisture and liquid-filled objects.
Region codes You can play discs with the following region codes. DVD region code English Official DivX® Ultra Certified product. Plays all versions of DivX ® video (including DivX ® 6) with enhanced playback of DivX® media files and the DivX® Media Format. Plays DivX® video with menus, subtitles and audio tracks. Countries Europe The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc.
Remote control d • • Navigate the menus. Search fast-forward ( ) or fast-backward ( ). Search slow-forward ( ) or slowbackward ( ). • e BACK Return to the previous display menu. • f • g Start, pause or resume disc play. / • Skip to the previous or next title, chapter, or track. • Mute volume. h i Numeric buttons • Select an item to play. j SUBTITLE • Select a subtitle language on a disc. k • • ZOOM Fit the picture format to the TV screen. Zoom the picture in or out.
Option 1: Connect to the HDMI jack English 3 Connect Make the following connections to use this product. Basic connections: • Video • Audio HDMI IN Optional connections: • Route audio to other devices: • Digital amplifier/receiver • Analog stereo system • USB flash drive Note • Refer to the type plate at the back or bottom of the • 1 product for identification and supply ratings. Before you make or change any connections, ensure that all the devices are disconnected from the power outlet.
Option 3: Connect to the AV OUT jack 1 Connect the supplied AV cables to: • Connect to digital amplifier/receiver the AV OUT jack (3.5mm) on this product. the video input jack on the TV. • DIGITAL IN VIDEO IN 1 Connect a coaxial cable (not supplied) to: • the COAXIAL jack on this product. • the COAXIAL/DIGITAL input jack on the device. Connect analogue stereo system Tip • The video input jack on the TV may be labeled as A/V • AUDIO IN IN, VIDEO IN, COMPOSITE or BASEBAND.
Select menu display language Caution Note • Risk of product damage! Ensure that the power supply • English Connect power • If this product is connected to a HDMI CEC compliant voltage corresponds to the voltage printed on the back of the unit. Before connecting the AC power cord, ensure you have completed all other connections. TV, skip this setting. It switches automatically to the same OSD menu language as per your TV setting (if the language set on TV is supported by this product).
4 Select [Progressive] > [On], then press OK. » A warning message is displayed. 5 To proceed, select [Ok] and press OK. » The progressive setup is complete. Note • Philips does not guarantee 100% interoperability with all HDMI CEC devices. Note • If a blank/distorted screen is displayed, wait for 15 • • • 6 7 seconds for the auto recovery. If no picture is displayed, turn off the progressive scan mode as follows: 1) Press to open the disc compartment. 2) Press the Numeric button ‘1’.
Action 1 Start, pause or resume disc play. Stop disc play. , , , AUDIO SUBTITLE REPEAT ZOOM ZOOM INFO Skip to a previous/next title or chapter. Search fast-backward or fastforward. Press repeatedly to change the search speed. Search slow-forward or slowbackward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available. Select an audio language or channel available on a disc. Select a subtitle language availabel on a disc. Select or turn off repeat mode.
Repeat play for a specific section 1 During play, press REPEAT A-B at the start Button Action REPEAT Select or turn off repeat mode. Repeat options may vary from disc type. point. Press REPEAT A-B again to set the end point. » Repeat play starts. 2 3 To cancel repeat play, press REPEAT A-B again. Note • The marked section for repeat play is only possible within a track/title. Play DivX® video DivX video is a digital media format that retains high quality despite a high rate of compression.
Play from USB flash drive • It may require longer time to display the disc content on the TV due to the large number of songs/photos compiled onto one disc/USB device. If the JPEG photo is not recorded with an ‘exif ’ type file, the actual thumbnail picture cannot be shown on the screen. It is replaced by a ‘blue mountain’ thumbnail picture. This player can only display digital camera pictures according to the JPEG-EXIF format, typically used by almost all digital cameras.
[Analogue Output] Select an analogue setting based on the audio device that is connected through the analogue audio jack. • [Stereo] - For stereo output. • [LT/RT] - For surround sound output through two speakers. Tip • You can set or change the password, go to [Preferences] > [Password]. [OSD Language] Select an on-screen menu language. [Sleep Timer] Switch automatically to standby at the preset time. • [Off] - Disable sleep mode.
Select a setting, then press OK. • To return to the previous menu, press • To exit the menu, press SETUP. . [TV System] Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country. • [PAL] - For PAL-system TV. • [Multi] - For TV that is compatible with both PAL and NTSC. • [NTSC] - For NTSC-system TV. [Sound Mode] Select a preset sound effect to enhance the audio output.
• Note [EasyLink Setup] – if this DVD player is connected to HDMI CEC compliant TV/devices, all connected devices can respond to the following commands simultaneously: • This product supports the resolution display of 720p and above. [HDMI Setup] When you connect this proudct and the TV with an HDMI cable, select the best HDMI setup that the TV can support. • [Resolution] - Select a video resolution that is compatible with the TV display capability.
Press SETUP. » [General Setup] menu is displayed. 2 3 4 Press to select [Preferences], then press . Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press . • To exit the menu, press SETUP. [Audio] Select an audio language for disc play. [Subtitle] Select a subtitle language for disc play. [Disc Menu] Select a disc menu language. [MP3/Jpeg Nav] Select to display the folders or display all the files. • [View Files] - Display all the files.
[Default] Reset all the settings of this product to factory default, except for [Disc Lock], [Parental control] and [Password] settings. Specifications Note • Specification and design are subject to change without 7 Additional information Update software For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website. Caution • Power supply must not be interrupted during software upgrade. 1 2 3 4 5 Press SETUP.
Signal-Noise (1 kHz): > 90 dB (A-weighted) Dynamic range (1 kHz): > 80 dB (A-weighted) Crosstalk (1 kHz): > 70 dB Distortion/noise (1 kHz): > 65 dB MP3: MPEG L3 Audio format • Digital: • MPEG/AC-3: Compressed digital (16, 20, 24 bits, fs 44.1, 48, 96 kHz) • MP3: 96, 112, 128, 256 kbps & variable bit rate, fs 32, 44.
• Turn on the audio device to its correct audio input source. No sound on HDMI connection. • You may not hear any sound from the HDMI output if the connected device is non-HDCP compliant or only DVI-compatible. • Ensure that the [HDMI Audio] setting is turned on. No sound during DivX video playback • The audio codec may not be supported by this product. Play DivX video files cannot be played. • Ensure that the DivX video file is complete. • Ensure that the file name extension is correct.
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 Ё᭛ Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 68
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. DVP4320_12_UM_V1.
