Software Upgrade

Introduction
The upgrade version of this software is Version 1.14. The upgrade fix for the error:
1. Disable some key in setup menu active
。
2. Disable repeat stop key in top loading model.
3. Reduce brightness of OSD/menu for some special TV of South America can't display.
DVP4000_V1.14.zip contains both the software and upgrade instructions (2 files in total)
1. build.img
2. update.ver
Tools Required
You will need the following items:
- A personal computer
- A CD-R/RW drive and writing application software
- A black CD-R or CD-RW disc
How to download the software to your computer
Right mouse button click on the file and click “Save Target As…” to save the zip file into your PC.
Unzip the .zip file and extract files into your PC.
Do not rename the filenames build.img & update.ver
Before you upgrade
It is important to write down the system version information of your set before you start the upgrade
procedure. This information is also useful in case you need to call Philips Customer Care Center.
1. Power up the set and select DISC source.
2. Open tray by pressing the OPEN/CLOSE button on the set, or by pressing and holding the
STOP button on the Remote Control.
3. Press DISPLAY button on the Remote Controller.
The TV screen will show:
DVP4000 /AA V2.BB
- /AA is the stroke version of the product
- BB is the current software version number (please do not upgrade if your current
software version in the set is equal or higher than V1.14)
1 of 2