Register your product and get support at www.philips.
1 Important Safety and important notice Trademark notice 4 4 4 2 Your DVD player Playable media Product overview 5 5 5 3 Connect Connect audio/video cables Optional audio connections Connect USB flash drive Connect power 7 7 7 8 8 4 Get started Prepare the remote control Find the TV input channel Select menu display language Turn on progressive scan Use Philips EasyLink 8 8 9 9 9 10 5 Play Play a disc Play video Play music Play photo Play from a USB flash drive 10 10 10 12 12 13 6 Other featur
1 Important Safety and important notice Warning negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Copyright notice • Risk of overheating! Never install the product in a • • • • • • • • confi ned space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod. divx.
• Remote control During a photo slideshow, switch between Fun Mode (color) and Simple Mode (black and white). For VCD and SVCD, turn on or off PBC (playback control). • a d • • • b r c Navigate the menus. Search fast-forward ( ) or fast-backward ( ). Search slow-forward ( ) or slowbackward ( ). e BACK Return to the previous display menu. • f d / • Skip to the previous or next title, chapter, or track. • Switch to the USB mode. g q p e f o n g h Numeric buttons • Select an item to play.
Englis h Option 2: Connect to the component video jacks 3 Connect Make the following connections to use this product. Basic connections: • Video • Audio Y Pb Pr Optional connections: • Route audio to other devices: • Digital amplifier/receiver • Analogue stereo system • USB flash drive Pb Y Pr COMPONENT VIDEO OUT Connect audio/video cables Select the best video connection that TV can support. • Option 1: Connect to the HDMI jack (for a HDMI, DVI or HDCP-compliant TV).
Connect multi channel receiver 1 Connect the audio cables (supplied) to: • the AUDIO OUT FRONT L/R jacks on this product. • the audio input jacks on the TV. Connect USB flash drive 1 FRONT L REAR L CENTER FRONT R REAR R SUBWOOFER MULTICHANNEL AUDIO IN 1 Connect the audio cables (not supplied) to: • the AUDIO OUT (FRONT L/R, REAR L/R, CENTER and SUBWOOFER) jacks on this product. • the audio input jacks on the device. Connect a USB flash drive to the this product.
Push and slide back the battery compartment (see “3” in the illustration). Turn on progressive scan Englis h 3 Note • To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see “Connect” > “Connect audio/video cables” > “Option 2: Connect to the component video jacks” for details). Note • If you are not going to use the remote control for a long time, remove the batteries. • Do not mix batteries (old and new or carbon and alkaline, etc.).
Use Philips EasyLink This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors. Note • Check the types of discs supported (see “Your DVD player” > “Playable media”). • If the password entry menu is displayed, enter the password before you can play the locked or restricted disc (see “Adjust settings” > “Preferences” > [Parental Control]).
2 menu. Select a play option, then press OK. • In some menus, press the Numeric buttons to input your selection. Access VCD menu The PBC (playback control) feature is available for VCD/SVCD, which can display the contents menu for you to select a play option. The PBC is on by default in the factory. Display play time 1 During play, press INFO. » The disc status menu is displayed. 2 Select [Time Disp.], and then press . » The display options vary from disc type. 3 Select an option, and then press OK.
Play MP3/WMA music Note • You can only play DivX (Ultra) video that is rented or purchased with the DivX registration code of this product (see “Adjust Settings” > “General setup” > [DivX(R) VOD Code]). Play music MP3/WMA is a type of highly compressed audio file (files with .mp3, .wma extensions). 1 Insert a disc or USB flash drive that contains the MP3/WMA music. • For USB, press . » A contents menu is displayed. 2 Control a track 1 Play a track. 2 Use the remote control to control the play.
• It may require longer time to display the disc content on the TV due to the large number of songs/photos compiled onto one disc/USB flash drive. If the JPEG photo is not recorded with an ‘exif ’ type file, the actual thumbnail picture cannot be shown on the screen. It is replaced by a ‘blue mountain’ thumbnail picture. This product can only display digital camera pictures according to the JPEG-EXIF format, typically used by almost all digital cameras.
8 Note • When you copy, never press any button. • Copy-protected media cannot be copied. Create MP3 files With this product, you can convert audio CDs into MP3 audio files. The created MP3 audio files are saved in the USB flash drive. 1 Insert an audio CD. 2 Connect a USB flash drive to the jack on this product. 3 During disc play, press AUDIO/CREATE MP3. » The MP3 creation menu is displayed. 4 Select [Yes] in the menu, and then press OK. Select [Start] in the menu, and then press OK to start to convert.
Note • Use this product’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered. [Analogue Output] Select an analogue setting based on the audio device that is connected through the analogue audio jack. • [LT/RT] - For the surround sound output through two speakers. • [Stereo] - For the stereo output.
1. Press OK. 2. Press to set the volume. 3. Press OK to confirm and exit. [Sound Mode] Select a preset sound effect to enhance the audio output. • [3D] - Select a virtual surround sound effect that is produced from the left and right audio channels. • [Movie Mode] - Select a sound effect for movies. • [Music Mode] - Select a sound effect for music. [Speaker Setup] Optimize the surround output for the connected speakers.
• [Saved picture] - A captured video image or JPEG photo. [Current picture] - Capture a video image or JPEG photo and save it on the product. • 1. Play a video or photo slideshow. 2. Select a video image or photo: press to pause, and then press SETUP. 3. Navigate to the option ([Video Setup] > [My Wallpaper] > [Current picture]). 4. Press OK to confirm. » One video image or JPEG photo is saved as wallpaper. » A newly saved image or photo replaces the earlier one.
[Audio] Select an audio language for disc play. [Subtitle] Select a subtitle language for disc play. [Disc Menu] Select a disc menu language. Note • If the language you have set is not available on the disc, the disc uses its own default language. • For some DVDs, the subtitle/audio language can only change from the disc menu. • To select the languages that are not listed in the menu, select [Others]. Then check the Language Code list at the back of this user manual and enter the respective language code.
Update software For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website. Caution • Power supply must not be interrupted during software upgrade. 1 2 3 4 5 Press SETUP. Select [Preferences] > [Version Info], and then press OK. Write down the file name, and then press SETUP to exit the menu. Visit www.philips.com/support to check for the latest software version, using the file name for this product.
Main unit The buttons on this unit do not work. • Disconnect this product from the power outlet for a few minutes, then connect again. No reaction to the remote control. • Connect this product to the power outlet. • Point the remote control at the IR sensor located on the front panel of this product. • Insert the batteries correctly. • Insert new batteries in the remote control. Picture No picture. • See the TVs user manual on how to select the correct input on the TV.
W HDMI High-Definition Multimedia Interface is a high-speed digital interface that can transmit uncompressed high definition video and digital multichannel audio. It delivers high quality picture and sound quality, completely free from noise. HDMI is fully backward-compatible with DVI. As required by the HDMI standard, connecting to HDMI or DVI products without HDCP (Highbandwidth Digital Content Protection) will result in no Video or Audio output. WMA Windows Media™ Audio.
22
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 Ё᭛ Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 68
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. DVP3588_94_UM_V3.
