Register your product and get support at www.philips.
1 Important Safety and important notice Trademark notice 4 4 4 2 Your DVD player Playable media Product overview 5 5 5 3 Connect Connect audio/video cables Optional audio connections Connect power 6 6 6 7 4 Get started Prepare the remote control Find the TV input channel Select a menu display language Turn on progressive scan 7 7 7 8 8 5 Play Play a disc Play video Play music Play photo 8 8 8 10 11 6 Adjust settings General setup Audio setup Video setup Preferences 11 11 12 12 13 7 Additi
1 Important Safety and important notice Warning • Risk of overheating! Never install the product in a • • • • • • • • confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Never place the product, remote control or batteries near naked flames or other heat sources, including direct sunlight. Avoid high temperature, moisture, water and dust.
Remote control English 2 Your DVD player Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. 1 2 Playable media 18 3 This product can play: • DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer), DVD-RW DL • Video CD/SVCD • Audio CD, CD-R/CD-RW • MP3 media, WMA media, JPEG files 4 17 16 5 Region codes You can play discs with the following region codes.
e BACK Return to the previous display menu. • f / Connect audio/video cables • Option 1: Connect to component video jacks (for a standard TV or Progressive Scan TV). Option 2: Connect to video (CVBS) jack (for a standard TV). • Skip to the previous or next title, chapter, or track. • • Mute ot restore audio output. Option 1: Connect to component video jacks g h Numeric buttons • Select an item to play. i SUBTITLE • Select a subtitle language on a disc.
Connect multi channel receiver English Note • The type plate is located on the back of the product. 1 Connect the AC power cable to the wall socket. » The product is ready to be set up for use. 4 Get started Prepare the remote control 1 FRONT L REAR L CENTER FRONT R REAR R SUBWOOFER 2 MULTICHANNEL AUDIO IN 1 3 Press and push the battery compartment to slide it open (see “1” in the illustration). Insert two AAA batteries with correct polarity (+/-) as indicated.
Select a menu display language Note • If a blank/distorted screen is displayed, wait for 15 seconds for the auto recovery. • If no picture is displayed, turn off the progressive scan mode as follows: 1) Press to open the disc compartment. 2) Press the Numeric button ‘1’. 6 7 1 Press SETUP. » [General Setup] menu is displayed. 2 3 Select [OSD Language], and then press . Press to select a language, and then press OK. Turn on progressive scan Note Press SETUP to exit the menu.
Button Action Start, pause or resume disc play. 1 2 Stop disc play. , , , AUDIO SUBTITLE ZOOM (Screen fit) ZOOM INFO Skip to a previous/next title or chapter. Search fast-backward or fastforward. Press repeatedly to change the search speed. Search slow-forward or slowbackward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available. Select an audio language or channel available on a disc. Select a subtitle language available on a disc.
Note • Applicable only to discs that contain multi-angle scenes. Display Action [Disc Go To] Skip play to a specific time within the disc. Skip play to a specific time within a track. Skip play to a specific track number. [Track Go To] Repeat play for a specific section 1 To set the start point during play, press REPEAT/REPEAT A-B repeatedly until is displayed. To set the end point, press REPEAT/REPEAT A-B again. » is displayed and the marked section starts to play repeatedly.
Play photo as slideshow You can play JPEG photos (files with .jpeg or .jpg extensions). 1 Insert a disc that contains the JPEG photos. » Slideshow begins (for Kodak disc), or a contents menu (for JPEG disc) is displayed. 2 Select a photo, and then press OK to start slideshow. » For a photo recorded with the “exif ” format, the display orientation is automatically optimized. To display photos in color (fun mode) or in black and white (simple mode), press DISC MENU.
• [15 Mins], [30 Mins], [45 Mins], [60 Mins] Select the countdown time for this product to switch to standby. [Auto Standby] Turn on/off the auto standby mode. • [On] - Switch to standby after 15 minutes of inactivity (for example, in pause or stop mode). • [Off] - Disable the auto standby mode. Audio setup 1 [Movie Mode] - Select a sound effect for movies. • [Music Mode] - Select a sound effect for music. [Speaker Setup] Optimize the surround output for the connected speakers.
[PAL] - For a PAL-system TV. [Multi] - For TV that is compatible with both PAL and NTSC. • [NTSC] - For an NTSC-system TV. [TV Display] Select a display format: 1. Play a video or photo slideshow. 2. Select a video image or photo: press to pause, and then press SETUP. 3. Navigate to the option ([Video Setup] > [My Wallpaper] > [Current picture]). 4. Press OK to confirm. » One video image or JPEG photo is saved as wallpaper. » A newly saved image or photo replaces the earlier one.
Note • If the language you have set is not available on the disc, the disc uses its own default language. • For some DVDs, the subtitle/audio language can only change from the disc menu. • To select the languages that are not listed in the menu, select [Others]. Then check the “Language Code” list at the back of this user manual and enter the respective language code. [Parental Control] Restrict access to discs that are unsuitable for children. These types of discs must be recorded with ratings. 1.
Update software For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website. Caution • Power supply must not be interrupted during software upgrade. 1 2 3 4 5 Press SETUP. Select [Preferences] > [Version Info], and then press OK. Write down the file name, and then press SETUP to exit the menu. Visit www.philips.com/support to check for the latest software version, using the file name for this product.
No reaction to the remote control. • Connect this product to the power outlet. • Point the remote control at the IR sensor located on the front panel of this product. • Insert the batteries correctly. • Insert new batteries in the remote control. Picture No picture. • See the TVs user manual on how to select the correct input on the TV. Change the TV channel until you see the Philips screen.
17
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 Ё᭛ Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 68
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. DVP3516_94_UM_V1.
