Register your product and get support at www.philips.
Contents Safety and important notice Trademark Notice 2 Your DVD player Features highlight Product overview 23 Media copy Create MP3 les 23 23 7 Adjust settings 25 General setup Audio setup Video setup Preferences 25 26 29 30 4 4 5 6 6 7 8 Additional information Update software Care 3 Connect Connect video cables Connect audio cables Route audio to other devices Connect USB device Connect to power outlet 4 Get started Prepare the remote control Find the correct viewing channel Select menu disp
1 Important Safety and important notice Warning • Risk of overheating! Never install the DVD player • • • • • • in a con ned space. Always leave a space of at least four inches around the DVD player for ventilation. Ensure the curtains or other objects never cover the ventilation slots on the DVD player. Never place the DVD player, remote control or batteries near naked ames or other heat sources, including direct sunlight. Only use this DVD player indoors.
Trademark Notice Important Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/ or other countries. DivX, DivX Certi ed, and associated logos are trademarks of DivX, Inc. and are used under license. Plays DivX® video with menus, subtitles and audio tracks.
2 Your DVD player Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips offers, register your product at www.philips.com/welcome. This DVD player brings audio and video to life. Just plays practically any disc format, including the digital photos with absolutely no compromise to picture quality. Create MP3 les Convert your favorite audio tracks from an audio CD into MP3 format. The created MP3 les are saved in your USB ash drive.
Product overview Remote control Main unit 1 3 Your DVD player 2 18 4 17 5 1 2 3 4 5 6 16 6 7 15 14 a 2 (Standby-on) • Turn on the DVD player or switch to standby mode. 8 9 13 10 12 b Disc compartment 11 c Display panel d Z (Open/Close) • Open or close the disc compartment. e u (Play/Pause) • Start, pause or resume disc play. f (USB) jack • Connect a USB ash drive. a 2 (Standby-On) • Turn on the DVD player or switch to standby mode.
d v V b B (Navigation buttons) • Navigate through the menus. • Select an audio language/channel. • Search fast-forward (B) or fastbackward (b). Press repeatedly to change the search speed. • Access the menu to create MP3. • Search slow-forward (v) or slowbackward (V). Press repeatedly to change the search speed. e 2 BACK • Return to the previous display menu. • Stop disc play. o u (Play/Pause) • Start, pause or resume disc play. p INFO • For disc, display the current status or disc information.
3 Connect Basic connections: • Video cables • Audio cables • You must connect this DVD player directly to a TV. Option 1: Connect to component video jacks Connect Make the following basic connections to use the DVD player.
Option 2: Connect to video (CVBS) jack Route audio to other devices Route the sound from this DVD player to other devices to enhance audio play. VIDEO IN Connect to multi channel receiver 1 Connect a composite video cable (supplied) to the TV OUT jack on this DVD player and the video input jack on the TV. FRONT L REAR L CENTER FRONT R REAR R SUBWOOFER MULTICHANNEL AUDIO IN Tip • The video input jack on the TV may be labeled as • FRONT L REAR L CENTER A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
Connect to digital ampli er/receiver Connect USB device DIGITAL IN Connect DIGITAL OUT COAXIAL 1 Connect a coaxial cable (not supplied) to the COAXIAL/DIGITAL OUT jack on this DVD player and the COAXIAL/DIGITAL input jack on the device. 1 Connect the USB ash drive to the (USB) jack on this DVD player. Note • This DVD player can only play/view MP3, WMA, Tip • You can optimize the audio output (see chapter • DivX or JPEG les that are stored on such devices.
4 Get started Navigate through the menu 1 Point the remote control directly at the remote sensor on this DVD player and select the desired function. 2 Use the following buttons on the remote control to navigate through the on-screen menus. Prepare the remote control 1 Push to open the battery compartment cover. 2 Insert two R03 or AAA type batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment.
1 2 Select menu display language 1 Press SETUP. [ General Setup ] menu is displayed. 2 Select [ OSD Language ], then press B. Press 2 to turn on the DVD player. Turn on the TV and switch to the correct video-in channel. • You may go to the lowest channel on the TV, then press the Channel Down button on the TV remote control until you see the Video In channel. General Setup • You may press ° button repeatedly on the TV remote control.
Turn on Progressive Scan Connect a progressive scan TV with component video jacks (see chapter ‘Connect video cables - Option 1: Connect to component video jacks’ for details). 1 Turn on the TV to the correct viewing channel for this DVD player. 2 3 4 Press SETUP. Press V to select [ Video Setup ]. Select [ Progressive ] > [ On ], then press OK. A warning message is displayed. Video Setup TV System On TV Display Progressive Off Picture Setting 5 To proceed, select [ OK ] and press OK.
5 Play Tip • If the password entry menu is displayed, you have to Play from disc • Play • enter the password before it can be played. If you pause or stop a disc for about 5 minutes, the screen saver activates. To deactivate the screen saver, press DISC MENU. After you pause or stop a disc, if no buttons are pressed within 15 minutes, this DVD player automatically switches to standby mode. Note • DVDs and DVD players are designed with regional • • restrictions.
Play video Change video play Note • For video disc, play always resumes from the point where it was last stopped. To start play from the 1 2 Play a title. Use the remote control to change the video play. beginning, press í while the message is displayed. Control a title 1 2 Action AUDIO/ CREATE MP3 Change audio language. • Only applicable to discs with multiple audio language or channel. SUBTITLE Change subtitle language. • Only applicable to discs with multiple subtitle language.
Note Preview disc contents • Some operations may not work with some discs. See the information accompanying the disc for details.. Play Access DVD menu 1 2 1 During play, press INFO. The disc status menu is displayed. 2 Select [ Preview ], then press B. DVD Press DISC MENU to access disc main menu. Select Digest Type: Select a play option, then press OK. Title Digest • In some menus, press the numeric buttons to input your selection.
Quick skip play to a speci c time View DVD play from different angles 1 During play, press INFO. The disc status menu is displayed. 1 During play, press INFO. The disc status menu is displayed. 2 Select the current elapsed playing time, then press B. 2 3 Select [ Angle ], then press B. • [ TT Time ] (title time) • [ CH Time ] (chapter time) Press the numeric buttons to change the angle. Play changes to the selected angle.
Play DivX® video DivX video is a digital media format that retains high quality despite a high rate of compression. This DVD player is DivX® Certi ed so that you can enjoy DivX video. • For some commercial audio disc, play may resume from the point where it was last stopped. To start play from rst track, press í. Insert a disc or USB that contains the DivX videos. • For USB, press . A contents menu is displayed. 2 3 Note Play 1 Play music Select a title to play, then press OK.
Quick skip play Play MP3/WMA music 1 MP3/WMA is a type of highly compressed audio le ( les with .mp3, .wma extensions). During play, press INFO until one of the following options is selected. Display Action [ Disc Go To ] Skip play to a speci c time within the disc. [ Track Go To ] Skip play to a speci c time within a track [ Select Track ] Skip play to a speci c track number. 2 Press the numeric buttons to change the time/number where you want to skip to.
Play photo Note Play photos as slideshow This DVD player can play JPEG photos ( les with .jpeg or .jpg extensions). 1 Insert a disc or USB that contains the JPEG photos. • For USB, press . For a Kodak disc, the slideshow begins automatically. For a JPEG disc, the photo menu is displayed. 2 Select the folder/album you want to play. • To preview the photos in the folder/ album, press INFO. • To go to previous or next screen display, press í/ë.
Play musical slideshow Play MP3/WMA music les and JPEG photo les simultaneously to create musical slideshow. The MP3/WMA and JPEG les must be stored on the same disc. 1 2 This DVD player plays/views MP3, WMA, DivX or JPEG les that are stored on USB device. Play MP3/WMA music. Navigate to the photo folder/album and press OK to start slideshow play. Slideshow begins and continues till the end of the photo folder or album. Audio continues to play till the end of the disc.
6 Advanced features Note Create MP3 les Media copy You can transfer data les such as MP3, WMA or JPEG from disc to the USB device. 1 Advanced features • While you copy, never press any buttons. • Copy-protected media cannot be copied. Insert a disc that contains the MP3/WMA/ JPEG les. You can convert audio CDs into MP3 audio les with this DVD player. The created MP3 audio les are saved in the USB device. 1 2 Insert an audio CD. Connect the USB ash drive to jack on this DVD player.
Option Description [ Speed ] Select the write-to- le speed. • If [ Normal ] speed is selected, music play can be heard while creating the MP3 le. [ Bitrate ] Select the quality level. Higher bitrate for better sound quality and bigger le size. • Default setting is [ 128 kbps ]. [ CRT ID3 ] Copy track information into the MP3 le. • Default setting is [ Yes ]. [ Device ] The created MP3 les can only be saved in USB device. 6 7 Press B to access the [ TRACK ] panel.
This section describes the various setting options of this DVD player. Symbol Option 4 Select a setting, then press OK. • To return to the previous menu, press b. • To exit the menu, press SETUP. Note Adjust settings 7 Adjust settings [ General Setup ] • See the explanations of the above options in the following pages. [ Audio Setup ] [ Disc Lock ] [ Video Setup ] [ Preferences ] Note • If the setup option is grayed out, it means the setting cannot be changed at the current state.
[ Auto Standby ] Turn off or on automatic standby switching mode. It is an energy saving feature. • [ On ] – switch to standby after 15 minutes of inactivity (for example, in pause or stop mode). • [ Off ] – disable auto standby mode. [ DivX(R) VOD Code ] Audio setup 1 Press SETUP. [ General Setup ] menu is displayed. 2 Press V to select [ Audio Setup ], then press B. 3 Select an option, then press OK. Display the DivX® registration code.
[ Digital Audio ] [ Volume ] Select the setting based on the digital ampli er/receiver that is connected through the digital jack. Set the default volume level when you play a disc. Option Description [ Off ] Disable digital output. [ All ] [ PCM Only ] The device supports multi-channel audio formats. The device is not capable of decoding multi-channel audio. Audio is downmixed to twochannel sound: see [ LPCM Output ] setting.
• [ Center Speaker/Rear Speakers ] Option Description [ Large ] Produce low frequency signal below 120 Hz. [ Small ] Cannot produce low frequency signal below 120 Hz. [ Off ] No speaker is connected. • [ Speakers Delay ] – Set the delay time for the center, subwoofer and rear speakers if they are placed closer to the listening position, so that the sound output from all speakers reach the listening position at the same time. 1. Press OK. 2. Select a speaker, then press b B to set the delay time. 3.
1 Press SETUP. [ General Setup ] menu is displayed. 2 Press V to select [ Video Setup ], then press B. 3 Select an option, then press OK. Video Setup TV System TV Display Progressive Picture Setting Select the screen format according to how you want the picture to appear on the TV. 4:3 Pan Scan (PS) 4:3 Letter Box (LB) 16:9 (Wide Screen) • [ 4:3 Pan Scan ] – for standard TV, a full-height screen display with the sides trimmed.
Preferences Note • If the language you have set is not available on the 1 Press SETUP. [ General Setup ] menu is displayed. 2 Press V to select [ Preferences ] , then press B. 3 Select an option, then press OK. • • disc, the disc uses its own default language. For some DVDs, the subtitle/audio language can only change from the disc menu. To select the languages that are not listed in the menu, select [ Others ].
[ DivX Subtitle ] Select to display the folders or display all the les. Select a character set that supports the DivX subtitle. • [ View Files ] – display all the les. [ Standard ] • [ View Folders ] – display the folders of MP3/WMA les. [ Password ] Follow the instructions on the TV to set or change the password for locked discs and play restricted DVDs.
8 Additional information 4 Visit www.philips.com/support to check for the latest software version, using the le name for this DVD player. 5 Refer to the upgrade instructions for more information. Note Update software • Disconnect the power cord for a few seconds and connect again to reboot the system. To check for updates, compare the current software version of this DVD player with the latest software version (if available) at the Philips website.
9 Speci cation Audio performance Playback media Audio format • DVD-Video, Video CD/SVCD, Audio CD, CD-R/ CD-RW, DVD+R/+RW, DVD-R/-RW, DivX-CD, Picture CD, MP3-CD, WMA-CD, USB ash drive • Digital: • MPEG/AC-3/PCM: Compressed digital (16, 20, 24 bits fs, 44.1, 48, 96 kHz) • MP3 (ISO 9660): 96, 112, 128, 256 kbps & variable bit rate fs, 32, 44.
10 Troubleshooting Warning • Risk of electric shock. Never remove the casing of this unit. • If this happens when you turn on the progressive scan setting or change the TV system setting, you have to switch to its default mode: 1. Press Z to open the disc compartment. 2. Press the numeric button ‘1’ (for progressive scan) or the numeric button ‘3’ (for TV System). To keep the warranty valid, never try to repair the system yourself.
Troubleshooting The contents of the USB ash drive cannot be read. • The USB ash drive format is not compatible with this DVD player. • Drive is formatted with different le system which is not supported by this DVD player (e.g. NTFS).
11 Glossary M A MP3 A le format with a sound data compression system. ‘MP3’ is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer3. By using the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD. Files are recognized by their le extension ‘.MP3’. Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-de nition or wide TV is 16:9.
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 中文 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 68
Electronics Visit us on web at www.philips.com/support or Call us on Tel. No.
© 2009 Koninklijke Philips Electronics N.V.
