Register your product and get support at DVP3350V/05 www.philips.
Connect 1 To connect to your television, follow the instructions below. 1 Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you have finished hooking up everything. Never make or change connections with equipment connected to the power outlet. 2 Connect the EURO AV1 AUDIO/VIDEO on the rear panel of this DVD/VCR to the SCART input on the TV using the SCART cable (not supplied).
Set up 2 Inserting batteries Remote control (back) Note where the positive and negative ends go Initial Settings - DVD Initial Settings - VCR LANGUAGE Setting Up the VCR the First Time 1 Press DVD on the Remote Control. 1 Turn on the TV and set it to your external video channel (SCART). 2 Press SETUP and the MAIN menu will appear. Highlight • • • • selects selects selects selects 2 Press STANDBY-ON 1 to turn on the DVD/VCR, then press VCR. and press right B. Menu language.
3 Enjoy Playing a Disc Playable Disc 1 With the TV and DVD/VCR on, press the DVD button to put the DVD/VCR in DVD mode. The DVD Player of the DVD/VCR will play the following Discs. DVDs must have a Region Code of ALL regions or Region 2. 2 ALL 2 Press Z OPEN/CLOSE to open the disc tray. Put a Disc in the tray with the label facing up and the shiny side facing down. Press Z OPEN/CLOSE again to close the tray.
