Register your product and get support at www.philips.
Eng lish Contents Safety and important notice Trademark notice 2 Your DVD player Feature highlights Product overview 3 Connect Connect video cables Connect audio cables Route audio to other devices Connect to power outlet 4 Get started Prepare the remote control Find the correct viewing channel Select menu display language Turn on Progressive Scan 5 Play Play from disc Play video Play music Play photo 6 Adjust settings General setup Audio setup Video setup Preferences 7 Additional information Care 4
1 Important Recycle notice Safety and important notice Warning • Risk of overheating! Never install the DVD • • • • • • player in a con ned space. Always leave a space of at least 4 inches around the DVD player for ventilation. Ensure curtains or other objects never cover the ventilation slots on the DVD player. Never place the DVD player, remote control or batteries near naked ames or other heat sources, including direct sunlight. Only use this DVD player indoors.
Eng lish Trademark notice Important Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
2 Your DVD player Region codes You can play discs with the following region codes. DVD region code Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips offers, register your product at www.philips.com/welcome. This DVD player brings audio and video to life. Just plays practically any disc format, including the digital photos with absolutely no compromise to picture quality. Feature highlights Screen Fit View the movie in full screen display on any TV.
Remote control Eng lish Product overview Main unit 1 You DVD playerl 2 18 3 4 17 a (Standby-On) • Turns on the DVD player or switches to standby mode. 16 5 6 b Disc compartment 15 7 c Display panel d 14 (Open/Close) • Opens or closes the disc compartment. e • (Play/Pause) Starts, pauses or resumes disc play. 8 9 13 10 12 11 a (Standby-On) • Turns on the DVD player or switches to standby mode. b (Open/Close) • Opens or closes the disc compartment.
d (Navigation buttons) Navigates through the menus. Searches fast-forward (right) or fastbackward (left). Press repeatedly to change the search speed. Searches slow-forward (up) or slowbackward (down). Press repeatedly to change the search speed. • • • e BACK • Returns to the previous menu. • For DVD, navigates to title menu. • For VCD version 2.0 or SVCD with PBC turned on, returns to the menu. f / • • g • (Previous/Next) Skips to the previous or next title, chapter, or track.
Make the following connections to use your DVD player. Basic connections: • Video • Audio Optional connections: • Route audio to other devices: • Digital ampli er/receiver • Analog stereo system Note • Refer to the type plate at the back or bottom Connect this DVD player to TV to view disc play. Select the best video connection that the TV can support. • Option 1: Connect to component video jacks (for a standard TV or Progressive Scan TV). • Option 2: Connect to video (CVBS) jack (for a standard TV).
Option 2 : Connect to video (CVBS) jack Route audio to other devices Route the audio from this DVD player to other devices to enhance audio play. VIDEO IN Connect to digital ampli er/receiver DIGITAL IN 1 DIGITAL OUT Connect a composite video cable (supplied) to the TV OUT jack on this DVD player and the video input jack on the TV. COAXIAL 1 Tip • The video input jack on the TV may be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. • This type of connection provides standard picture quality.
Eng lish Connect to power outlet Warning • Risk of product damage! Ensure that the 1 Connect power supply voltage corresponds to the voltage printed on the back or the underside of the DVD player. Connect the power cord to the power outlet. » The DVD player is ready to be set up for use.
4 Get started Navigate the menu Prepare the remote control 1 Push to open the battery compartment cover. 2 Insert 2 AAA batteries with correct polarity (+/-) as indicated. 3 Close the cover. Caution • Remove batteries if they are exhausted or if the remote control is not to be used for a long time. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Batteries contain chemical substances, they should be disposed off properly.
Press to turn on the DVD player. General Setup Turn on the TV and switch to the correct video-in channel in one of the following ways: • Go to the lowest channel on your TV, then press the Channel Down button until you see the Philips screen. • Press SOURCE button repeatedly on the remote control of your TV. Tip OSD Language Auto Standby 1 Press SETUP. » [General Setup] menu is displayed. 2 Select [OSD Language], then press . • The language options are different depending on your country or region.
Turn on Progressive Scan Connect a progressive scan TV with component video jacks (see chapter ‘Connect video cables - Option 1: Connect to component video jacks’ for details). Video Setup TV System Interlaced TV Display Picture Setting P-Scan Component Video 1 Turn on the TV to the correct viewing channel for this DVD player. 2 3 4 Press SETUP. 5 Press to select [Video Setup]. Select [Component Video] > [P-Scan], then press OK . » A warning message is displayed.
5 Play Play from disc Note • DVDs and DVD players are designed with have to enter the password before it can be played. • If you pause or stop a disc for about 5 minutes, the screen saver activates. To deactivate the screen saver, press DISC MENU. • After you pause or stop a disc and no buttons are pressed within 15 minutes, this DVD player automatically switches to standby mode. regional restrictions. Ensure that the DVD video you play is for the same region zone as your player (indicated on its back).
Play video 1 2 Note • For video disc, play always resumes from the point where it was last stopped. To start play from the beginning, press while the message is displayed. Control a title 1 2 Play a title. Use the remote control to control the title. Button Action Starts, pauses or resumes disc play. Stops disc play. Skips to the next title or chapter. Skips to the beginning of the current title or chapter. Press twice to jump to the previous title or chapter.
1 2 Press DISC MENU to access disc main menu. Select a play option, then press OK . • In some menus, press the Numeric buttons to input your selection. • To return to the title menu during play, press BACK . Access VCD menu The PBC (Playback Control) for VCD/SVCD is turned on by default in the factory. When you load in a VCD/SVCD, the contents menu is displayed. 1 Press Numeric buttons to select a play option, then press OK to start play.
View video play from different camera angles 1 During play, press INFO. » The disc status menu is displayed. 2 3 Select [Angle], then press . Press the Numeric buttons to change the angle. » Play changes to the selected angle. Note • Applicable only to discs contain multi-angle Play music Note • For some commercial audio disc, play may resume from the point where it was last stopped. To start play from rst track, press . Control a track 1 2 Play a track.
Play photo MP3/WMA is a type of highly compressed audio le ( les with .mp3, .wma extensions). Play photo as slideshow Insert a disc that contains the MP3/WMA music. » A contents menu is displayed. 2 Play starts. • To select another track, press then press OK . 3 This DVD player can play JPEG photos ( les with .jpeg or .jpg extensions). Play 1 Eng lish Play MP3/WMA music , To return to the main menu, press until the root menu is selected, then press OK .
Play musical slideshow Note • You may require longer time to display the disc content on the TV due to the large number of songs/photos compiled onto one disc. • If the JPEG photo is not recorded with an ‘exif ’ type le, the actual thumbnail picture is not be shown on the display. It is replaced by a ‘blue mountain’ thumbnail picture. • This DVD player can only display digital camera pictures according to the JPEG-EXIF format, typically used by almost all digital cameras.
This section describes the various setting options of this DVD player. Symbol Option Select a setting, then press OK . • To return to the previous menu, press . • To exit the menu, press SETUP. Eng lish 4 [OSD Language] Selects the default on-screen menu language. [General Setup] [Audio Setup] [Video Setup] [Preferences] [Auto Standby] Turns off or on automatic standby switching mode. It is an energy saving feature.
[Digital Output] Selects the setting based on the digital ampli er/receiver that is connected through the digital jack. • [Off] - Disables digital output. • [PCM] - Downmixs to PCM format (2 channel). • [All] - Supports multi-channel audio formats. [Volume] Sets the default volume level when you play a disc. 1. Press OK . 2. Press to set the volume. 3. Press OK to con rm and exit. [Down Sampling] Selects the output sampling rate for better sound quality.
Preferences Eng lish [TV Display] Selects one of the following display formats: Note • Stop disc play before you can access to • • • [4:3 Pan Scan] – For 4:3 screen TV: fullheight display with the trimmed sides. [4:3 Letter Box] – For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen. [16:9] – For wide-screen TV: display ratio 16:9. Adjust settings [Preferences].
[Disc Menu] Selects the disc menu language. Note • If the language you have set is not available on the disc, the disc uses its own default language. • For some DVDs, the subtitle/audio language can only change from the disc menu. Preferences Change password Old Password New Password Confirm new password OK [Parental Control] Restricts access to discs that are unsuitable for children. These types of discs must be recorded with ratings. 1. Press . 2. Select a rating level, then press OK 3.
Care Eng lish 7 Additional information Caution To check for updates, compare the current software version of this DVD player with the latest software version (if available) at the Philips website. Caution cleaners available commercially, or anti-static sprays intended for discs. Clean discs Wipe the disc with a micro bre cleaning cloth from the center to the edge in a straight line movement. • Power supply must not be interrupted during software upgrade.
8 Specification Note • Speci cation and design are subject to change without notice. Accessories supplied • Remote control and batteries • Audio/video cables Playback media • DVD-Video, Video CD/SVCD, Audio CD, CD-R/CD-RW, DVD+R/+RW, DVD-R/RW, Picture CD, MP3-CD, WMA-CD TV standard • Number of lines: • 625 (PAL/50Hz); 525 (NTSC/60Hz) • Playback: Multi-standard (PAL/NTSC) Video performance • Video DAC: 14 bits, 108 MHz • Y Pb Pr: 0.
Eng lish Main unit • Dimensions (w x h x d): 360 x 37 x 209 (mm) • Net Weight: approximately 1.
9 Troubleshooting Warning Sound No sound. • Ensure that the audio cables are connected and the connected device is turned on to the correct input source. • Risk of electric shock. Never remove the casing of the DVD player. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using the DVD player, check the following points before requesting service. If the problem remains unsolved, register your DVD player and get support at www.philips.com/welcome.
A PBC Playback Control. A system where you navigate through a Video CD/Super VCD with on-screen menus that are recorded onto the disc. You can enjoy interactive playback and search. Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-de nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. J JPEG A very common digital still picture format.
Electronics Visit us on web at www.philips.com/support or Call us on Tel. No.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved.
