Specifications

2. Warnings, lasersafety instructions and notesEN 6

DVP320

REGION CODE USA Î 1

EUROPE Î 2

AP Î 3

LATAM Î 4

INDIA / RUSSIA Î 5

CHINA Î 6 (or 0)

<SUBTITLE><0> Set to setup configuration of DVP320B/17 and DVP320F/17

<SUBTITLE><1> Reserved

<SUBTITLE><2> Set to setup configuration of DVP320/93

<SUBTITLE><3> Set to setup configuration of DVP320/69

<SUBTITLE><4> Set to setup configuration of DVP320/75

<SUBTITLE><5> Set to setup configuration of DVP320/78

4. The change should effect immediately with information indicated on TV screen.

Note: When changing the set-up configuration, the change will take immediate effect with the information indicated on the TV

screen for a short period.

.3.4. Software upgrade via Download disc

Both the application and servo software are delivered in one SW stack and it can be flashed into the DVD player by means of a

CD-ROM disc. The CD-ROM disc has to be made with a CD writer SW.

Note:

1) The file name used for writing on the CD-R/RW MUST

be in UPPER CASE. e.g.: GAP.BIN

2) For better and fast reading, add one big garbage file of 50-100MB.

.3.4.1. Software upgrade procedure

1) Open disc door on the player.

2) Put the DOWNLOAD DISC into the player and close disc door.

3) The upgrading operation will start automatically.

4) The Play_LED will blink (turn ON and OFF).

5) The upgrading will take approximately about 1 minute.

6) Take out the upgrade disc when the Play_LED stop blinking.

Important note:

Do not power off or interrupt the mains during the upgrading else the player's flash memory will be erased.

.3.5. Verify setting

To check that the setting has change successfully.

1. Press <DISPLAY> button on the remote control while disc tray is open.

2. Two lines text will appear on the TV screen. That is how it looks like.

GAP542PH-030812-320-171U

SERVO:001FC74 REG:1

In text, the following numbers refer to:

•

SD542PH-030812 Î refer to Application software version

REG 1 Îrefer to region code

SERVO:001FC74 Î refer to servo software version

320-171 Î refers to set-up configuration of a type number,eg. DVP320/17

.3.6. ComPair

There is no ComPair available.