Specifications

4.Dismantling instructions and exploded view EN 21
DVP320
4 Dismantling instructions and exploded view
4.1 Dismantling instructions DVP320
See exploded view for item numbers
Front ASSY 200
Remove screws (Item 230)
Remove flex connections to Mpeg
Display board 1003
Remove 4 screws item 212
Demount board
Loader module 1001
Remove screws item 214
Soldering the ESD protection point
at the loader module
Remove screws item 227
Remove screws item 223 &
225
Remove flex connections to
Mpeg board
Remove top shield (item 219,
refer to service hint for details)
Remove screws item 229
(PSU board to frame)
Release 3 snaps of locking
Demount board
Remove flex connections to
PSU board
MPEG board 1002
PSU board 1005
Demount the module
Demount board
Remove flex to Front board
Remove flex connections to
Loader board
*
*
Note: Because DVD Loaders are very sensitive to ESD. During replace, must obey the procedure.
Refer to service hints for details
Mounting
Demounting