Specifications

3. Directions for useEN 14
DVP320
16 Setup Menu
Screen Saver This function is used to turn the screen saver on or off.
1 Press the 34 keys to highlight SCREEN SAVER
in the GENERAL SETUP menu.
2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to
highlight the selected item.  ON: In STOP or No DISC mode, if no actions are performed within 5~6 minutes, the screen saver will be activated. Press the POWER or PLAY key on the remote control or the PLAY key on the front panel to restore the normal mode.  OFF: Screen saver is disabled.
4 Press OK to confirm. 5 Press 1 key to return to the top menu, or press
SYSTEM MENU to remove the menus.
Quit the program playback In the PROGRAM menu,
1 Press the 1 234 keys to select EXIT at the
bottom of the screen.
2 Press the OK key to quit this menu.
Stop the program playback
0 To resume normal playback, press STOP 9 twice
to stop playing the Program. Press PLAY 2 to start play at the beginning of the Disc. Repeat the program playback
0 During playback of the programmed tracks, press
the REPEAT key. You can choose playback a track in the program menu repeatedly or all of the tracks in program menu repeatedly.
Disc Lock When the disc is locked, the player will store its specific code into the memory for future identification. After loading the disc next time, the DVD player will prompt you to enter the password. Then, press OK to load the disc.
1 Press the 34 keys to highlight DISC LOCK in the
GENERAL SETUP menu.
2 Enter its submenu by pressing the 2 key. 3 Press the 3 4 keys to select LOCK or UNLOCK,
then press OK to confirm.  LOCK: Lock the disc being played.  UNLOCK: unlock the disc.
5 Press 1 key to return to the top menu, or press
SYSTEM MENU to remove the menus.
NOTE: 1. When a locked disc is loading, the DVD player will prompt you to enter your password (842100 is the default password). 2. To change the password , refer to the PASSWORD chapter.
18 Setup Menu
Digital Output If you connected the Player to a Stereo using the COAXIAL jack, adjust DIGITAL OUTPUT (audio) as described below. If you are not using the COAXIAL jack, no adjustment is necessary.
1 Press the 34 keys to highlight DIGITAL
OUTPUT.
2 Enter its submenu by pressing the 2 key. 3 Press the 34 keys to highlight the selected item.
 ALL: To select the original default audio settings as received by most Stereos.  PCM ONLY: If your stereo is PCM-compatible, or can not decode MPEG-2 or DTS audio. Refer to your Stereo manual for details.
4 Press OK. 5 Press 1 key to return to the top menu, or press
SYSTEM MENU to remove the menus.
Note: If DIGITAL OUTPUT is set to ALL, all audio settings except MUTE are invalid.
LPCM Output If you connect the DVD player to a PCM compatible Stereo via the digital terminals, such as coaxial etc, you may need to select LPCM OUTPUT. Discs are recorded in a certain sampling rate. The higher the sampling rate, the better the sound quality.
1 Press the 34 keys to highlight the LPCM
OUTPUT.
2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to
highlight the selected item.  48K: Playback a disc recorded at the sampling rate of 48kHz.  96K: Playback a disc recorded at the sampling rate of 96kHz.
4 Press OK. 5 Press 1 key to return to the top menu, or press
SYSTEM MENU to remove the menus.
3D SOUND The 3D SOUND can simulate the echoes and frequencies that may be available in a particular environment. Choose the environment that you would like to recreate by changing the 3D SOUND setting.
1 Press the 34 keys to highlight the 3D SOUND. 2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to
highlight the selected item.  OFF: Playback the disc with original sound effects.
4 Press OK. 5 Press 1 key to return to the top menu, or press
SYSTEM MENU to remove the menus.
Digital Audio Setup menu Use the DIGITAL AUDIO SETUP to adjust some of the Playerís digital sudio settings.
1 Press SYSTEM MENU in STOP mode. 2 Press the 1 2 keys to highlight the AUDIO
SETUP PAGE icon at the top of the menu.
3 Press OK or 4 to confirm. 4 Press the 34 keys to select DIGITAL AUDIO
SETUP. Press OK.