Specifications

3.Directions for use EN 13
DVP320
15
General Setup menu Some settings need to be made in this menu. They are: DISC LOCK, PROGRAM, OSD LANGUAGE and SCREEN SAVER. Follow the steps below:
1 Press the SYSTEM MENU key in STOP mode to
enter the setup menu.
2 The GENERAL SETUP PAGE will be selected. 3 Press the OK or 4 key to confirm selection.
OSD language This option is to let you to select a language for information displayed on TV screen.
1 Press the 34 keys to highlight OSD
LANGUAGE in the GENERAL SETUP menu. OSD LANGUAGE will be highlighted in green.
2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to
highlight the selected language.
4 Press the OK key to confirm. 5 Press 1 key to return to the top menu, or press
SYSTEM MENU to remove the menus.
Program (not for Picture CD/MP3)
1 To choose PROGRAM, press 3 4 keys. 2 Press the 2 key to select the item INPUT MENU,
then press OK.  The PROGRAM menu will appear. This is where you enter the Track/Chapter numbers in the order in which you want to play them.
Input your favorite track
1 Input valid track number by pressing the
numerical keys.  The number of available Titles, Chapters, or Tracks will appear at the top of the screen.
2 Use the 1 234 buttons to move to other
Program positions.  If the track number is more than ten, press Previous°1 orNext 2ô to access other Program pages. Or, press 1 234 to highlight
NEXT button, and then press OK.
3 Repeat this process to fill the Program.
Remove a track
1 Press the 1 234 keys to move the cursor to the
track you want to remove.
2 Press OK or PLAY 2 key to remove this track.
Playback tracks When programing is completed,
1 Press the 1 234 keys to select START at the
bottom of the screen.
2 Press OK.
 The Program will start playing automatically.
3 When the disc is loaded again, you also can
pla
yback the tracks in the program menu.
Setup Menu
16 Setup Menu
Screen Saver This function is used to turn the screen saver on or off.
1 Press the 34 keys to highlight SCREEN SAVER
in the GENERAL SETUP menu.
2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to
highlight the selected item.  ON: In STOP or No DISC mode, if no actions are performed within 5~6 minutes, the screen saver will be activated. Press the POWER or PLAY key on the remote control or the PLAY key on the front panel to restore the normal mode.  OFF: Screen saver is disabled.
4 Press OK to confirm. 5 Press 1 key to return to the top menu, or press
SYSTEM MENU to remove the menus.
Quit the program playback In the PROGRAM menu,
1 Press the 1 234 keys to select EXIT at the
bottom of the screen.
2 Press the OK key to quit this menu.
Stop the program playback
0 To resume normal playback, press STOP 9 twice
to stop playing the Program. Press PLAY 2 to start play at the beginning of the Disc. Repeat the program playback
0 During playback of the programmed tracks, press
the REPEAT key. You can choose playback a track in the program menu repeatedly or all of the tracks in program menu repeatedly.
Disc Lock When the disc is locked, the player will store its specific code into the memory for future identification. After loading the disc next time, the DVD player will prompt you to enter the password. Then, press OK to load the disc.
1 Press the 34 keys to highlight DISC LOCK in the
GENERAL SETUP menu.
2 Enter its submenu by pressing the 2 key. 3 Press the 3 4 keys to select LOCK or UNLOCK,
then press OK to confirm.  LOCK: Lock the disc being played.  UNLOCK: unlock the disc.
5 Press 1 key to return to the top menu, or press
SYSTEM MENU to remove the menus.
NOTE: 1. When a locked disc is loading, the DVD player will prompt you to enter your password (842100 is the default password). 2. To change the password , refer to the PASSWORD chapter.