Specifications
3. Directions for useEN 10
DVP320
9
1
To get a slow motion effect during playback, press
4.
2 To select different searching speeds, press 4 again.
3 Press the PLAY key to return to normal play back.
NOTE:
- The SLOW BACKWARD function is not available
for Super VCD/VCD discs.
Audio control during playback
MUTE
1 Press the MUTE key to disable the sound output.
2 Press the MUTE key again to deactivate mute.
Audio channel selection
1 Super VCD has two stereo audio channels which
are used for the audio language selection.
2 Press the AUDIO key on the remote control to
select the audio channels you want.
3 VCD has only one stereo audio channel, you can
select STEREO, LEFT MONO, RIGHT MONO or
MIX-MONO by pressing the AUDIO key on the
remote control.
STEREO: Output the left and right audio
channels of the disc through the left and right
audio sockets accordingly.
MONO LEFT: Output the left audio channels
of the disc through the left and right audio
sockets.
MONO RIGHT: Output the right audio
channels of the disc through the left and right
audio sockets.
MIX MONO: each of the audio sockets can
output the same audio effect as stereo.
Note: If you choose digital audio output and set
DIGITAL OUTPUT to ALL, you can not select LEFT
MONO and RIGHT MONO with the AUDIO key.
Repeat/Shuffle
You may play a Chapter, Track, Title, or entire Disc
repeatedly.
1 During disc playback, press REPEAT to choose a
Repeat option.
DVD disc: You can choose TITLE or CHAPTER,
which means repeat playing the Title or Chapter.
VCD disc: You can choose TRACK or ALL,
which means repeat playing the Track or the
whole disc.
2 Press REPEAT to choose SHUFFLE or SHUFFLE
REPEAT. The Tracks, Chapters, and/or Titles will
play in random order (SHUFFLE) instead of the
order recorded (1, 2, 3, etc.). If you choose
SHUFFLE REPEAT, all the Tracks, Chapters, and/or
Titles will play in random order repeatedly.
Operation
Basic Playback
1
Press POWER on the top panel to turn on the
DVD player. Turn on your TV. Set it to the correct
Video In channel.
2 Press OPEN/CLOSE on the top panel to open
the disc compartment.
3 Place the Disc on the Disc hub, with the label
facing up and then press the lid down.
After recognizing the disc, the player will start
to playback automatically.
4 Wait for the Disc to stop spinning completely
before you reach to remove the Disc or touch
the Disc.
Notes:
ñ DVDs may have a region code. Your player will
not play discs that have a region code different
from the region code of your player.
ñ If ëDisc Lockí is set to LOCK and the disc
inserted is not authorized, the 6-digit code must be
entered and/or the disc must be authorized (see
ëDisc Lockí).
General Operation
Note: All instructions set out below refer to the
remote control, unless otherwise stated.
Video control during playback
STOP/PLAY
1 If you press the STOP key once, you can later
resume from the point at which you stopped by
pressing the PLAY key. If you pressed the STOP
key twice, the player will start from the beginning
of the disc.
PAUSE
1 To get a still picture, press PAUSE key during
playback.
2 To step forward to the next frame picture, press
PAUSE key again. (This is not available for CD.)
3 To resume normal playback, press PLAY.
SEARCH
1 To search the contents in fast speed, press the 2
or1 for fast forward/backward searching.
2 To select different searching speeds, press the 2
or1 again.
3 Press PLAY to return to normal playback.
Slow Motion
1 To get a slow motion effect during playback, press
3 or4.
2 To select different searching speeds, press 3 or 4
repeatedly.
3 Press PLAY to return to normal play back.
10
Operation
3 To cancel repeat or shuffled playback, press
REPEAT until all the repeat and shuffle modes
disappear from the TV screen.
Note: If you want to use this funciton in VCD discs,
please set PBC off firstly.
Repeat A-B
DVD-Video Discs: repeat a sequence in a
title or chapter
Video and Audio CDs: repeat a sequence in a
track
1 Press REPEAT A- B at your chosen starting point.
2 Press REPEAT A- B again at your chosen end
point.
The repeat sequence begins.
3 To exit the sequence, press REPEAT A-B.
Virtual Remote Control
0 Press and hold °1 key during playback. Then a
Virtual Remote will be displayed at the down left
corner of the screen. Press 341 2 to select a
button in the virtual remote, and then press OK
in the real remote to activate the buttonís
function.
When you activate Virtual Remote Control,
you also can use the real remote control to do
any operation.
When you activate Virtual Remote Control,
341 2 keys will not be used to search time.
5 Disc Resume
This player can resume playback of the last 5
disc
s, even if the disc was ejected or the DVD
player is in Standby mode.
1 Load one disc, which is one of the last 5 discs.
2 Press PLAY when DVD player is recognizing the
disc. If the information of this disc has been
stored in the memory of DVD player, it will be
played back from the stop point last time.
OSD (On-Screen Display)
This function will provide some information about
your playing disc on the screen.
0 Press DISPLAY key on the remote control.
Title/Chapter/Track Selection
1 Press 3 4 to select TITLE, CHAPTER or
TRACK.
2 Press OK.
3 Press the numerical keys to enter the Title,
Chapter, or Track number you want.
DVD player will playback selected title.
Time Search
1 Press 3 4 to select TIME DISP. Press OK. Press
3 4 to highlight a display type, then press OK.
The selected display type and its counter will
appear at the bottom of the display.
The following display types will be available,
depending on the Disc in the Player.
For DVD discs:
CHAPTER ELAPSED - elapsed playing time of
current Chapter;
CHAPTER REMAIN - remaining playing time of
current Chapter;
TITLE ELAPSED - elapsed playing time of current
Title;
TITLE REMAIN - remaining playing time of
current Title.
For VCD/SVCD discs:
TOTAL ELAPSED - elapsed playing time of
current Disc;
TOTAL REMAIN - remaining playing time of
current Disc;
SINGLE ELAPSED - elapsed playing time of
current Track;
SINGLE REMAIN - remaining playing time of
current Track.
2 Press OK to select the time counter beside TT
TIME, CH TIME, TRACK TIME or DISC TIME.
3 Press the numerical keys to enter the elapsed
playing time at which you want to resume
playback.
Enter the time in hours, minutes, and seconds.
Play will start at that point.
Press 1 to quit and reselect TT TIME, CH TIME,
TRACK TIME or DISC TIME.
Frame-by-Frame
Previous
Chapter/Track
Reverse Search
Audio language
Subtitles
Forward
Slow Motion
Next Chapter/
Tra ck
Forward Search
Pause
Camera Angles
Reverse Slow
Motion