Register your product and get support at www.philips.
1 Important Safety and important notice Trademark notice 4 4 4 2 Your DVD player Feature highlights Product overview 5 5 5 3 Connect Connect video cables Connect audio cables Route audio to other devices Connect power 6 6 7 7 7 4 Get started Prepare the remote control Find the correct viewing channel Select menu display language Turn on progressive scan 8 8 8 8 8 5 Play Play a disc Play video Play music Play photo 9 9 9 10 11 6 Adjust settings General setup Audio setup Video setup Preference
1 Important Safety and important notice Warning Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. • Risk of overheating! Never install the product in a • • • • • • confi ned space. Always leave a space of at least 4 inches around the product for ventilation.
c Indicators “DivX, DivX” Certified, and associated logos are trademarks of DivX, Inc. and are used under license. Play DivX® video with menus, subtitles and audio tracks. E n g lis h d IR sensor • Remote sensor. e • Open or close the disc compartment. • Start, pause or resume disc play. f Remote control CLASS 1 LASER PRODUCT 1 2 Your DVD player 2 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.
d (Navigation buttons) Navigate through the menus. Search fast-forward (right) or fastbackward (left). Press repeatedly to change the search speed. Search slow-forward (up) or slowbackward (down). Press repeatedly to change the search speed. • • • e BACK • Return to the previous menu. • For DVD, navigate to title menu. • For VCD version 2.0 or SVCD with PBC turned on, return to the menu. f / • • g • (Previous/Next) Skip to the previous or next title, chapter, or track.
Connect the component video cables (not supplied) to: • the Y Pb Pr jacks on this product. • the COMPONENT VIDEO input jacks on the TV. Route audio to other devices Route the audio from this product to other devices to enhance audio play. Connect to digital amplifier/receiver Tip DIGITAL IN • The component video input jacks on the TV may be • E n g lis h 1 DIGITAL OUT labeled as Y Pb/Cb Pr/Cr or YUV. This type of connection provides good picture quality.
• 4 Get started Prepare the remote control 3 The language options may vary from different regions. Press to select a language, then press OK. Turn on progressive scan Note • To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see “Connect” > “Connect video cables” > “Option 1: Connect to the component video jacks” for details). 1 2 3 Open the battery compartment. Insert two R03 or AAA batteries with correct polarity (+/-) as indicated.
Button , Play a disc , Caution • Do not place any objects other than discs into the disc compartment. • Do not touch the disc optical lens inside the disc compartment. AUDIO 1 2 3 Press to open the disc compartment. Insert a disc with its label facing up. Press to close the disc compartment and start disc play. • To view disc play, turn on the TV to the correct viewing channel for this product. • To stop disc play, press .
2 Press the Numeric buttons to select a play option, then press OK to start play. • If PBC is turned off, it skips the menu display and starts play from the first track. Preview disc contents 1 During play, press INFO. Repeat play a specific section 1 During play, press REPEAT A-B at the start point. Press REPEAT A-B again to set the end point. » Repeat play starts. 2 3 To cancel repeat play, press REPEAT A-B again. » The disc status menu is displayed. 2 3 Select [Preview], then press .
Action REPEAT Select or turn off repeat mode. Repeat options may vary from disc type. Quick skip play 1 During play, press » Slideshow begins (for Kodak disc), or a contents menu (for JPEG disc) is displayed. 2 Select a photo folder, then press OK to start slideshow. • To preview the photos in thumbnail, INFO. press • To select a photo, press the Navigation buttons. • To enlarge the selected photo and start slideshow, press OK. • To return to the menu, press BACK.
3 [OSD language] Select an on-screen menu language. Navigate to the photo folder/album and press OK to start slideshow play. » Slideshow begins and continues till the end of the photo folder or album. » Audio continues to play until the end of the disc. • To stop slideshow play, press . • To stop music play, press again. [Sleep Timer] Switch automatically to standby at the preset time. • [Off] - Disable sleep mode.
Note Video setup E n g lis h [Digital Audio] Select a digital setting based on the digital amplifier/ receiver that is connected through the digital jack (coaxial/digital). • [Digital Output] - Select a type of digital output. • [Off] - Disable digital output. • [All] - Support multi-channel audio formats. • [PCM Only] - Downmix to two-channel audio format. • [LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate. • [48kHz] - For discs recorded at sampling rate of 48 kHz.
[Picture Setting] Select a predefined set of picture color settings or customize the personal setting. • [Standard] - Original color setting. • [Bright] - Vibrant color setting. • [Soft] - Warm color setting. • [Personal] - Customize the color setting. Set the level of brightness, contrast, tint and color saturation, then press OK. Preferences Note [Parental control] Restrict access to discs that are unsuitable for children. These types of discs must be recorded with ratings. 1. Press OK. 2.
• [Standard] – English, Irish, Danish, Estonian, Finnish, French, German, Italian, Portuguese, Luxembourgish, Norwegian (Bokmål and Nynorsk), Spanish, Swedish, Turkish [ Hebrew ] (except for Australia and New Zealand) – Hebrew Note • Ensure that the subtitle file has the exact same file name as the movie file. If for example the file name of the movie is ‘Movie.avi’, then you need to name the text file ‘Movie.sub’ or ‘Movie.srt’. [Version Info] Display the software version of this product.
Connections • Y Pb Pr output: Cinch 3x • Video output: Cinch (yellow) • Audio output (L+R): Cinch (white/red) • Digital output: • 1 coaxial: IEC60958 for CDDA/LPCM; IEC61937 for MPEG 1/2, Dolby Digital Main unit • Dimensions (w x h x d): 360 x 38 x 203 (mm) • Net Weight: approximately 1.
A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. W WMA Windows Media™ Audio. Refers to an audio compression technology developed by Microsoft Corporation. WMA data can be encoded with Windows Media player version 9 or Windows Media player for Windows XP.
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 中文 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 68
PHILIPS CONSUMER ELECTRONICS WARRANTY POLICY FOR AUSTRALIA Effective 1st July 2009 Philips provides its Consumer Electronics products with a 1 Year Manufacturers Warranty. The benefits given to the purchaser by this warranty are in addition to all other rights and remedies, which the purchaser has in respect of the product under the Trade Practices Act or other Commonwealth or State Law.
20 EN
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: DVP3111_79_UM_V2.
