Register your product and get support at www.philips.
1 Important Safety and important notice Trademark notice 4 4 4 2 Your DVD player Feature highlights Product overview 5 5 5 3 Connect Connect video cables Connect audio cables Route audio to other devices Connect power 6 6 7 7 7 4 Get started Prepare the remote control Find the correct viewing channel Select menu display language Turn on progressive scan 7 7 8 8 8 5 Play Play a disc Play video Play music Play photo 8 8 9 10 11 6 Adjust settings General setup Audio setup Video setup Preferences
1 Important Safety and important notice Warning Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. • Risk of overheating! Never install the product in a • • • • • • confi ned space. Always leave a space of at least 4 inches around the product for ventilation.
Remote control Eng lis h 2 Your DVD player Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. 1 2 Feature highlights 18 3 Screen Fit View the movie in full screen display on any TV. 4 Progressive scan video Push the limits of standard resolution and provide a more film-like DVD video display on a TV screen. 17 16 5 Region codes You can play discs with the following region codes.
e f / • • g • • BACK • Return to the previous menu. • For DVD, navigate to title menu. • For VCD version 2.0 or SVCD with PBC turned on, return to the menu. (Previous/Next) Skip to the previous or next title, chapter, or track. Press and hold for fast-backward or fastforward search. (Mute) • Mute ot restore audio output. Note • Refer to the type plate at the back or bottom of the product for identifi cation and supply ratings.
the COAXIAL/DIGITAL input jack on the device. Eng lis h • Option 2: Connect to video (CVBS) jack Connect analogue stereo system VIDEO IN AUDIO IN FRONT L 1 Connect a composite video cable to: • the TV OUT jack on this product. • the video input jack on the TV. FRONT R 1 Tip • The video input jack on the TV may be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. • This type of connection provides standard picture quality. Connect the audio cables to: • the FRONT L/R jacks on this product.
3 Close the battery compartment. Caution • Remove batteries if they are exhausted or if the remote control is not to be used for a long time. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Batteries contain chemical substances, so they should be disposed of properly. Find the correct viewing channel 1 2 Press to turn on this product. Turn on the TV and switch to the correct video-in channel. (Refer to the TV user manual on how to select the correct channel.
Press to close the disc compartment and start disc play. • To view disc play, turn on the TV to the correct viewing channel for this product. • To stop disc play, press . Button ZOOM ZOOM Note • Check the types of discs supported (see “Specifications” > “Play media”). • If the password entry menu is displayed, enter the password before you can play the locked or restricted disc (see “Adjust settings” > “Preferences” > [Parental Control]).
Skip play to a specific time 1 During play, press INFO. Button Start, pause or resume disc play. Stop disc play. » The disc status menu is displayed. 2 3 Select an option for the current elapsed playing time, then press . • [TT Time] (title time) • [Ch Time] (chapter time) • [Disc Time] (disc time) • [Track Time] (track time) Press the Numeric buttons to enter the time to skip to, then press OK. Skip to a previous/next track. Select an item to play. , , Display play time 1 During play, press INFO.
Button / • For disc recorded in multiple sessions, only the first session is played. • For a WMA file that is protected by Digital Rights • • • / Management (DRM), it cannot be played on this product. This product does not support MP3PRO audio format. For any special character that is present in the MP3 track name (ID3) or album name, it might not be displayed correctly on the screen because these characters are not supported.
1 Press SETUP. » [General Setup] menu is displayed. 2 3 4 Press . Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press • To exit the menu, press SETUP. 3 4 . [Disc Lock] Set play restriction for a disc which is loaded in the disc compartment (maximum 20 discs can be locked). • [Lock] - Restrict access to the current disc. The next time you want to play this disc or unlock it, you need to enter the password. • [Unlock] - Play all discs.
• [4:3 Letter Box] - For 4:3 screen TV: widescreen display with black bars on the top and bottom of the screen. [16:9] - For wide-screen TV: display ratio 16:9. • [Progressive] If a progressive scan TV is connected to this product, turn on the progressive scan mode. • [On] - Turn on progressive scan. • [Off] - Turn off progressive scan mode. Note • Applicable only to Dolby Digital encoded DVD. Note • For more detailed description, see “Get started” > Video setup “Turn on progressive scan”.
Select an audio language for disc play. [Subtitle] Select a subtitle language for disc play. [Disc Menu] Select a disc menu language. 1. Press the Numeric buttons to enter ‘136900’ or the last set password at [Old Password] field. 2. Enter the new password at [New Password] field. 3. Enter the new password again at [Confirm PWD] field. 4. Press OK to exit the menu. Note • If the language you have set is not available on the disc, • • the disc uses its own default language.
Play media • DVD-Video, Video CD/SVCD, Audio CD, CD-R/CD-RW, DVD+R/+RW, DVD-R/-RW, Picture CD, MP3-CD, WMA-CD TV standard • Number of lines: • 625 (PAL/50Hz); 525 (NTSC/60Hz) • Play: Multi-standard (PAL/NTSC) Video performance • Video DAC: 12 bits, 108 MHz • Y Pb Pr: 0.
No reaction to the remote control. • Connect this product to the power outlet. • Point the remote control at the IR sensor located on the front panel of this product. • Insert the batteries correctly. • Insert new batteries in the remote control. Picture No picture. • See the TVs user manual on how to select the correct input on the TV. Change the TV channel until you see the Philips screen.
Eng lis h PHILIPS CONSUMER ELECTRONICS WARRANTY POLICY FOR AUSTRALIA Effective 1st July 2009 Philips provides its Consumer Electronics products with a 1 Year Manufacturers Warranty. The benefits given to the purchaser by this warranty are in addition to all other rights and remedies, which the purchaser has in respect of the product under the Trade Practices Act or other Commonwealth or State Law.
18
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 中文 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 68
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: DVP3100_79_UM_V2.
