Quick Install Guide

3
b If you still do not find your brand, please proceed as follows:
1 Select 'None'. You will find this setting at the end of the list.
2 Please note the type and manufacturer of your external receiver and call
the customer support service in your country. You will find the
telephone number on the back of the instruction manual.
3 The control data of the external receivers are automatically updated
(completed) via the GUIDE Plus+
®
system. This is done through the
aerial, the cable, or the external receiver. You do not need to bring the
device to a service centre.
Problem
0 Press OK .
A Select the input socket of the DVD recorder to which the receiver is
connected.
B Switch the receiver on and select programme number 02 on the
receiver or using its remote control.
C Read the information on the screen carefully.
Confirm with OK .
The DVD recorder will now attempt to use the G-LINK connection
on the external receiver to select a different programme number
(e.g.12). This programme number depends on your external receiver.
À Has the external receiver been switched to the programme number
displayed on the screen?
If this is the case, select 'YES'.
If no switching has taken place, select 'NO'.
a My external receiver has not switched to the other programme
number.
1 Check that the external receiver is connected and switched on.
2 Check the connection and position of the G-LINK transmitter.
3 For another attempt with a new code of the chosen brand, select 'NO'.
4 Confirm with OK on the remote control.
5 If the receiver has not switched yet, select 'NO' again and confirm with
OK . It may take several attempts for a receiver brand.
If you return to the setup screen after confirming 'NO', your receiver
may not have been installed. Check the connections again.
6 If all connections are o.k., please note the type and manufacturer of your
external receiver and call the customer support service in your country.
You will find the telephone number on the back of this instruction
manual.
The control data of the external receivers are automatically updated
(completed) via the GUIDE Plus+
®
system. This is done through the
aerial, the cable, or the external receiver. You do not need to bring the
device to a service centre.
Problem
Á Your external receiver has now been installed.
 Press OK to return to the setup overview.
à Press the GUIDE/TV button to leave the screen.
Ä Switch the DVD-Recorder off with the STANDBY m button.
Å For the GUIDE Plus+
®
System to operate correctly, it is necessary for
the DVD recorder to collect the necessary data. The DVD recorder
may take up to 24 hours to do this.
ENGLISH