Quick start guide

2
How to make a recording
1 Press MONITOR to view the currently selected input signal on
the screen.
2 Select the programme number from which to record using
CHANNEL q or CHANNEL r .
Recording via external sockets
Using CHANNEL q or CHANNEL r , select the front sockets
('CAM1','CAM2') or the sockets ('EXT1','EXT2') at the back of the
DVD recorder, from which you wish to record.
Selecting the recording mode (quality)
Using REC MODE , you can choose between 'M1' (camcorder
recordings/1 hour), 'M2' (2 hours), 'M2x' (2,5 hours), 'M3' (3 hours) or
'M4' (4 hours) , 'M6' (6 hours) or 'M8' (8 hours).
SAFE-RECORD
Normally, a recording always begins at the position where the previous
recording ended. All subsequent recordings will be erased.
If you want the new recordig to be made at the end of all the other
recordings, hold down REC/OTR n until 'SAFE REC' appears on
the display.
3 Press RECORD or REC/OTR n to start the recording.
a 'NO SIGNAL' (no signal) will appear on the display
b Check whether the cable connectors are properly inserted.
b If the recording is to be made from a video recorder, change the
'tracking' setting on the video recorder.
b In case of bad or non-standard video input signals, the DVD recorder
may be unable to detect the signal.
How to program a recording
1 Switch on the TV set. If required, select the programme number
for the DVD recorder.
2 Press TIMER s on the remote control.
Timer
Timer programming
Date
01
Prog.
BBC1
Start
20:15
VPS
PDC End
21:30
Rec
Mode
M1
Mo-Fr/Weekly
Press SELECT
To store
Press OK
3 Select 'Timer programming' using B or A and confirm with
C .
The current information is displayed.
4 Select the field using D or C .
5 Enter the data you want using B , A , or with the number
buttons 0..9 .
6 Confirm with OK .
The information has been stored in a TIMER block.
7 To end, press TIMER s .
8 Switch off the DVD recorder using STANDBY m .
A programmed recording functions only if the DVD recorder has been
switched off using STANDBY m .
Quick install guide