Quick start guide

ManualsBrandsPhilips ManualsHome AudioDVDR730/00

Connecting to the TV

1 Switch off your TV set.

2 Remove the aerial cable plug from your TV set. Insert it into the

ANTENNA IN socket at the back of the DVD recorder.

3 Insert one end of the supplied aerial cable into the TV

OUT socket at the back of the DVD recorder and the other end

into the aerial input socket at the back of the TV set.

4 Connect socket EXT1 TO TV-I/O or sockets S-VIDEO OUT

(Y/C) , VIDEO OUT (CVBS) , AUDIO OUT L/R with the

corresponding sockets of your TV set.

My TV sets supports the functions Easy Link, Cinema Link,

NexTView Link, Q-link, Smart Link, Megalogic, Datalogic,...

Connect the scart socket EXT1 TO TV-I/O at the back of the DVD

recorder with the - suitable for data transfer - scart socket of your TV set (see

the instruction manual of your TV set) using a special cable (suitable for these

data transfers).

Connecting to the mains

Always check if the local mains voltage matches the voltage range

printed on the type plate at the back or bottom of the DVD-recorder.

If not consult your dealer or the customer support from your country.

1 Switch on the TV set.

2 Insert one end of the supplied mains cable into the mains socket

4MAINS at the back of the DVD recorder and the other end

into the wall socket.

Initial installation

1 Press STANDBY-ON m on the front of the DVD-recorder

P 'PHILIPS' and then 'IS TV ON?' will appear on the display.

2 If necessary, select the programme number for the input socket at

the TV set.

P The initial installation menu appears on the screen.

Virgin mode

Menu Language

English

Español

Français

Italiano

Deutsch

Press OK to continue

3 Select your favourite setting using B or A .

Confirm with OK .

4 Proceed in the same way with the further menus: 'Playback

audio', 'Subtitle', 'TV shape','Country'.

P The Automatic channel search starts after the confirmation of

the message 'If you have connected the antenna - press

OK' using OK .

P After all channels have been found, the menu for Time/Date

setting appears.

Check the data displayed and change them if necessary

5 Press OK to continue set up.

ENGLISH

Quick install guide

Summary of content (4 pages)

PAGE 1
Quick install guide 1 Switch off your TV set. 2 Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder. 3 Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set. 4 Connect socket EXT1 TO TV-I/O or sockets S-VIDEO OUT (Y/C) , VIDEO OUT (CVBS) , AUDIO OUT L/R with the corresponding sockets of your TV set.
PAGE 2
Quick install guide How to make a recording How to program a recording 1 Press MONITOR to view the currently selected input signal on the screen. 1 Switch on the TV set. If required, select the programme number for the DVD recorder. 2 Select the programme number from which to record using CHANNEL q or CHANNEL r . 2 Press TIMER s on the remote control.
PAGE 3
The 'Digital Photo Manager' Using the 'Digital Photo Manager', you can view and modify JPEG pictures from a memory card, Picture CD, DVD, or a CD ROM. You can store them on a DVD+RW/+R or on the memory card. In addition, you can store the pictures in a so-called album in a specific order, yet without changing the order in which the pictures are stored on the memory card. Moreover, you can view the pictures in a slide show at adjustable intervals.
PAGE 4
ENGLISH Making a 'DVD compatible' slide show Using this function, you can record the pictures in such a way, that you can view the slide show from a roll or an album on a DVD player. The slide show will be stored on the DVD+RW/+R as a video title. If you want to store the photos in the JPEG format in addition to the video title, you must prepare the DVD+RW so that you can store both pictures and videos. On a DVD+R you can only store either photos or videos.