User Manual

40
English
3139 246 14212
Programming recordings
with the G-Code
®
System
With this programming system, you only
need to enter the G-Code
®
programme
number as all the information needed by
the DVD recorder for programming is
contained in the programming number.
1 Turn on the TV power. Select the correct
Video In channel at the TV.
2 Press TIMER on the remote control.
➜ The timer overview appears.
TIMER 11.55 PM
LIST OF TIMERS
TIMER DETAILS
10:55PM CNBC Weekly
23:45 Disco  12.04
21:00 BBC2  Daily
06:00 PM HBO  16.04
08:00 PM ABC 13.04
Delete New Timer Change
Start time
Stop time
Date
Repeat
Channel
VPS
Record Mode
12:00 PM
18:05 PM
15:07:2004
Once
199 BBC24
DVD HQ
Off
G-Code
3 Press the matching colour coded button
on the remote control to select
{ G-Code }.
➜ The G-Code entry screen appears.
TIMER MENU 12.55 PM
G-Code number
Clear Store Cancel
4 Use the alphanumeric keypad 0-9 to
enter the G-Code
®
number.
(e.g.,: 5-312-4 or 5,312 4, key in ‘53124’).
➜ This number is up to 9 digits long and
can be found next to the start time of the
TV programme in your TV listings
magazine.
● To clear the G-Code
®
entry, press the
matching colour coded button on the
remote control to select { Clear }.
● To cancel the G-Code
®
programming,
press the matching colour coded button
on the remote control to select
{ Cancel }.
➜ The timer overview appears.
5 Press OK to confirm, then press the
matching colour coded button on the
remote control to select
{ Store }.
➜ The system will store the timer entry
and return to the timer overview screen.
● If the information is missing or not
available, you may be asked to enter more
information. Follow the instructions on
the TV.
● If you want to make changes, use
3 4 1 2 to select the appropriate entry
field. If required, make changes using 3 4
or the alphanumeric keypad 0-9.
6 To exit, press TIMER.
7 Insert a DVD+R(W).
8 Press STANDBY-ON to switch off the
DVD recorder.
➜ The DVD recorder must be in standby
mode in order for the timer recording to
occur. If not, a warning message will
appear ten minutes before the recording
starts.
➜ If you ignore the warning message, the
DVD recorder will switch to standby
mode automatically before the
programmed recording begin.
➜ The '
TIMER’ icon will light up on the
display panel if a timer recording is set.
Timer Recording (cont’d)
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
During timer recording, press STANDBY-ON will stop recording.
DVDR6xx_69_Eng_14212 9/1/04, 5:30 PM40