User Manual

12
English
3139 246 14212
Connecting to Additional Devices
You can connect a video cassette
recorder (VCR), DVD player, decoder,
satellite receiver or cable box to the
input sockets at the back of the DVD
recorder (IN-EXT 1 or IN-EXT 2).
The possible connection is depending on
the capabilities of the additional devices.
Switching between S-Video input and
Video (CVBS) input takes place
automatically. If both are used for
connecting to external devices, the signal
from S-Video socket has priority.
The COMPONENT VIDEO (IN-EXT1)
sockets are designed only for ‘interlaced’
signals. Progressive Scan input signals
cannot be processed by the DVD
recorder.
Connecting a Satellite Receiver/
Cable Box
1 If your Satellite Receiver/Cable Box has
only a single antenna output (RF OUT or
TO TV), use the antenna cable to connect
it with the ANTENNA input socket at
the back of the DVD recorder.
ANTENNA
OUTIN
CH3 CH4
2 For complete connection to your TV set,
see pages 9~11 for details.
● Alternatively, you can connect it to the
VIDEO (CVBS) (or S-VIDEO (Y/C))
and AUDIO L/R input sockets at the
back of the DVD recorder if your
Satellite Receiver/Cable Box has the same
output sockets.
➜ To watch/record the programmes,
press TUNER on the remote control,
then press 3 4 to select ‘EXT 2’.
AUDIO OUT
R L
VIDEO
OUT
TO TVINT IN
CH3 CH4
Cable TV or
Satellite signal
Using the input sockets
(IN-EXT 1 or IN-EXT2)
Satellite
Receiver/
Cable Box
Satellite
Receiver/
Cable Box
DVDR6xx_69_Eng_14212 9/1/04, 5:29 PM12