DVD Recorder DVDR615 User manual Visit us at www.p4c.philips.
LASER Type Wave length Output Power Beam divergence Semiconductor laser InGaAlP (DVD) AIGaAs (CD) 658 nm (DVD) 790 nm (CD) 30 mW (DVD+RW write) 1.0 mW (DVD read) 1.0 mW (CD read) 84 degrees (DVD) 61 degrees (CD) CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. For Customer Use: Read carefully the information located at the bottom or rear of your DVD Recorder and enter below the Serial No.
Special Functions Your PHILIPS DVD recorder has a number of special functions that will make day-to-day use of your new DVD recorder easier for you. Using the ‘Digital Photo Manager’, you can view and modify JPEG pictures from a Picture CD, DVD, or a CD ROM. You can create slide shows and play them on a DVD player. This is a simple programming system for DVD recorders. To use it, enter the programming number associated with your television programme.
Table of Contents English Special Functions ................................... 3 Front Panel ................................................. 19 Sockets behind the flap ............................... 19 Care and Safety Information Setup .............................................................. 6 Cleaning discs ............................................... 6 About recycling ........................................... 6 General Information Introduction ...........................................
Recording Using the Browser Discs for recording ................................... 33 Recording settings ..................................... 33 Browsing the disc ...................................... 47 Recording mode ........................................... 34 Recording language ...................................... 34 Inserting chapter markers .......................... 34 Filter mode ..................................................... 35 Browsing the picture disc ........................
Care and Safety Information English CAUTION! High voltage! Do not open. You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. Setup Finding a suitable location – Place the set on a flat, hard and stable surface. Do not place the set on a carpet. – Do not position the set on top of other equipment that might heat it up (e.g., receiver or amplifier). – Do not put anything under the set (e.g.
Introduction Accessories supplied Your Philips DVD recorder allows you to record the TV programmes or duplicate camcorder recordings to a DVD+RW or DVD+R and play pre-recorded DVDs. The recordings you make on the Recorder will play on some DVD players and DVD-ROM drives. The DVD+R discs have to be finalised before they can be played on other DVD players. – – – – Please take the time to read this user manual before using your DVD recorder. It contains important information and notes regarding operation.
Connecting to TV English General The necessary cable connections must be made before you can record or playback TV programmes using your DVD recorder. Selecting a suitable connection to your TV When you install your DVD recorder for the first time, select one of the following options to connect the DVD recorder and your TV. ● Option 1: Using Y Pb Pr sockets Select this if your TV is equipped with a component video sockets. It provides the best picture quality (see pages 9).
Connecting to TV (cont’d) English Option 1: Using Y Pb Pr sockets Antenna or Satellite/Cable TV signal 1 2 4 3 5 The Component Video (Y Pb Pr) method of transmitting pictures produces the highest quality as the video signal is split into its Y (brightness), Pb and Pr (blue minus brightness, red minus brightness) components. The signals are transmitted via separate cables. The cables and the associated sockets are mostly coloured red, green and blue.
Connecting to TV (cont’d) English Option 2 : Using S-Video (Y/C) socket Antenna or Satellite/Cable TV signal 1 2 4 3 5 This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y signal) and colour signal (C signal) separately. This mini DIN socket is also called a Hosiden jack.
Connecting to TV (cont’d) English Option 3 : Using Video (CVBS) socket Antenna or Satellite/Cable TV signal 1 2 4 3 5 This cable, usually featuring yellow cinch plugs, is used for transmitting the Composite Video signal (FBAS, CVBS). In this method of transmission, the colour signal and the brightness signal are transmitted on the same cable.
Connecting to Additional Devices English Using the input sockets (IN-EXT 1 or IN-EXT2) Connecting a Satellite Receiver/ Cable Box 1 If your Satellite Receiver/Cable Box has only a single antenna output (RF OUT or TO TV), use the antenna cable to connect it with the ANTENNA input socket at the back of the DVD recorder.
Connecting a VCR/DVD player You will need this connection if you want to record the video tapes or discs to a DVD+R(W)s. Option 1 1 Use a component video cable (red/green/ blue) to connect the DVD recorder’s COMPONENT VIDEO (IN-EXT1) input sockets to the corresponding component video output sockets on the VCR/DVD player. 2 Use an audio cable (red/white) to connect the DVD recorder’s AUDIO L/R (IN-EXT1) input sockets to the audio output socket on the VCR/DVD player.
Connecting Additional Devices (cont’d) English Connecting a camcorder to the front sockets S-VIDEO OUT DV OUT VIDEO OUT AUDIO OUT 2 L 1 R OR CH- CH- CH+ You can use the front sockets to copy camcorder recordings. These sockets are located behind the flap on the right hand side. Option 1: Using DV IN socket Use this connection if you have a Digital Video or Digital 8 camcorder. The DV socket will conforms to the i.LINK standard. It provides the best picture quality. ● Use an i.
Connecting to Additional Devices (cont’d) STEREO AUDIO IN Using digital/optical audio output sockets OPTICAL IN English Using analogue audio output sockets DIGITAL IN L R OR You can connect the DVD recorder to a two channel stereo system or receiver in order to enjoy the stereo sound system.
Remote Control English 4 1 2: Cursor buttons for moving to the left or right. 34: Cursor buttons for moving up/down or going to the next/previous channel. 5 SELECT – Select a function. – Toggle between upper and lower case characters while using the alphanumeric keypad. 6 REC 0 – Start recording the current TV channel or the current video input source. CH+ 7∞§ – Skip to previous or next Chapter/Track. – Holding down the button for fast reverse or fast forward function.
Remote Control (cont’d) – Enter numbers or letters in appropriate entry fields. – Select a chapter/track number to play. – Select a TV channel while in internal tuner mode. English # Alphanumeric keypad 13 $ BROWSER – Display the on-screen Media Browser that allows you to browse through and manage the contents stored in the currently loaded disc. 14 % DISC-MENU 15 – Access to DVD’s disc menu or Index Picture screen of a DVD+R(W). 16 ^ OK – Store or confirm an entry.
Remote Control (cont’d) English Inserting Batteries Using the remote control to operate the system 3 1 Aim the remote control directly at the remote sensor (iR) on the front panel. 1 2 2 Select the source you 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, following the indications (+-) inside the compartment. 3 Close the cover. CAUTION! – Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
1 2 3 5 4 English Front Panel 9 67 8 1.3 CH- ! @ 0 1 STANDBY-ON 2 – Turn on or off the DVD recorder. 2 Disc tray CH+ # DV IN CAM 1 CAM 2 Sockets behind the flap Flip down the door as indicated by the OPEN 2 label at the right hand corner. 0 S-VIDEO 3 OPEN/CLOSE ç 4 Display panel – S-video input for SVHS/Hi8 camcorders or SVHS/Hi8 video recorders (input channel number 'CAM 1'). – Show information about the current status of the DVD recorder. ! VIDEO – Open or close the disc tray.
Installing the DVD Recorder 6 Press 4 to select { Done } and press OK English First Installation The First Installation menu will appear the very first time you turn on the DVD recorder. These settings will help you set up the basic DVD recorder features easily, including TV channels and language options. IMPORTANT! – You have to turn on your TV and select the correct Video In channel to see the First Installation menu. – You have to complete the First Installation before start operating the DVD recorder.
Note: Make sure you have successfully made all the required connections to the DVD recorder, the TV and Satellite Receiver/Cable Box (if any) and switched them on. The automatic channel search will detect the signals and save all the available programme channels. 0 Press OK again to start automatic TV channel search. ➜ The automatic search may take 15 minutes.
Installing the DVD Recorder (cont’d) English TV channel programming Although the DVD recorder selects available TV channels during first installation, you may want to repeat the process later if more channels become available in your area or if you are reinstalling the DVD recorder. Automatic TV channel search This will erase and replace all previously stored TV channels. 1 Press SYSTEM-MENU on the remote control. ➜ The system menu appears on the TV. 2 Press 4 repeatedly to select { Set-up }.
Setting favourite TV channels You can set your favorite TV channels for quick access by using the channel up/ down button on the remote control. 1 Press SYSTEM-MENU. ➜ The system menu appears on the TV. 2 Press 4 repeatedly to select { Set-up }. 3 Press 2 repeatedly to select { Analogue Ch. }. 1 Press SYSTEM-MENU. ➜ The system menu appears on the TV. 2 Press 4 repeatedly to select { Set-up }.
Installing the DVD Recorder (cont’d) English 5 Press 4 to select { Preset } and press 2 to confirm. Use the alphanumeric keypad 0-9 to enter the preset number for the channel to store (e.g., '01'), then press the matching colour coded button to select { Store }. 6 Press 4 to select { Preset name } and press 2 to confirm. Use the alphanumeric keypad 0-9 to enter the preset name for the found channel or preset, then press the matching colour coded button to select { Store }.
Setting the time and date Setting the language If the DVD recorder does not set the time and date correctly, you can set the clock manually by following the steps below. You can select the language for subtitles and audio for DVD playback. For some DVDs, the subtitle/audio language can only be changed via the DVD disc menu. If the selected language is not available on the disc, the disc’s default setting language will be used instead. 1 Press SYSTEM-MENU on the remote control.
Playback English Playable discs Using this DVD Recorder, you can play and record on the following discs: Recording and Playback DVD+RW (DVD ‘plus’ Rewritable); can be recorded on over and over. DVD+R (DVD ‘plus’ Recordable); can be recorded only once. Playback only: DVD Video (Digital Versatile IMPORTANT! – If the inhibit icon (XError) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time.
Starting disc playback ● If a dialogue appears on the TV showing : { Do you want to access the disc content?}. ➜ Select { Yes } to show the disc content menu (see page 47 “Browsing the discs”). ➜ Select { No } to return to the last active mode. ➜ If you want to remove this dialogue, you have to enable the { Auto play } function (see page 52). ● If the pin code entry dialogue appears on the TV, this means that the child lock/ parental control was activated for the inserted disc (see pages 56~57).
Playback (cont’d) English Playing a DVD+R(W) disc Playing a picture disc (slide show) You can display JPEG pictures in the selected roll automatically one after the other at adjustable intervals. 1 Insert a DVD+RW or DVD+R disc. 2 If the disc content menu appears on the TV Use 1 2 3 4 to navigate within the menu and select a title to play, then press PLAY 2. 3 To stop playback, press STOP 9.
Using Toolbar options 1 Press SYSTEM-MENU on the remote control. ➜ The system menu appears on the TV. 2 At { Toolbar }, press 2 to select { Options }. DVD-VIDEO-TITLE 04|CO1 STOP 1 Press 4 to select { Subtitle } and press 2 to enter its options.
Additional Playback Features (cont’d) English Changing audio soundtrack language This operation works only on DVDs with multiple soundtrack language or VCDs with multiple audio channel. This function can also be accessed via the Red button on the remote control. 1 Press 4 to select { Audio } and press 2 Zooming in This option allows you to enlarge the picture on the screen and to pan through the enlarged picture. 1 Press 4 to select { Zoom } and press 2 to enter zoom in mode.
Changing to another title/ chapter/track Searching forwards/ backwards When a disc contains more than one track, title or chapter, you can change to a different track, title or chapter as follows. You can fast forward or fast reverse a disc at four, eight or thirty two times normal playback speed. English Additional Playback Features (cont’d) 1 During playback, hold down ∞ (reverse) During playback, ● Press § to go to the next title/chapter/ track.
Additional Playback Features (cont’d) English Selecting various play mode Repeat play You can select a Chapter, Track, Title or the entire disc for repeat playback. 1 Press Yellow button { REPEAT } repeatedly on the remote control to select one of the repeat options.
Discs for recording Two different formats of DVD recordable discs can be used with this DVD recorder: DVD+RW (DVD ‘plus’ Rewritable) – Discs are re-writable can be used for multiple recordings once existing data is erased. IMPORTANT! Unrecordable pictures Television programmes, films, video tapes, discs, and other materials may be copyrighted, it cannot be recorded on this recorder.
Recording (cont’d) English Recording mode The recording mode defines the picture quality of recordings and the maximum recording time for a disc. During playback, the correct picture quality will automatically be selected. This function can also be accessed via the REC MODE button on the remote control. 1 Press 4 to select { Record mode } and press 2 to enter its options. 2 Press 3 4 to select one of the following record modes.
Filter mode Manual recording For long play or extended play recording, you can select a suitable filter mode to optimise the video recording. The setting does not influence high quality or standard play recording mode. Use the 'Manual recording' function to start recording immediately (e.g., to record a TV show already in progress). 1 Press 4 to select { Filter } and press 2 to enter its options. 2 Press 2 to select one of the options.
Recording (cont’d) English 6 To stop the recording, press STOP 9. ➜ ‘MENU UPDATE’ or ‘CREATE MENU’ appears on the display panel to indicate that the DVD recorder is writing the list of contents. Wait until the message disappears before removing the DVD+R(W). ● If the end of a disc is reached during recording, recording will stop and the DVD recorder will turn off automatically. Pausing a recording 1 During recording, press PAUSE ;. ➜ You can use this function to avoid recording commercials.
Recording (cont’d) English Deleting a recording You can delete a specific recording from the DVD+R(W). 1 Insert a recorded DVD+RW or an unfinalised DVD+R. ➜ The Index Picture screen or disc content menu appears on the TV. 2 Use 1 2 3 4 to select an entry in the menu. 3 Press the matching colour coded button on the remote control to select { Delete }. ➜ The current recording will be deleted. ➜ For DVD+RW only, a new recording can now be made here.
Timer Recording English Introduction – – – – Programming recordings Use 'Timer Recording’ to automatically start and stop a recording at a later date/ time. The DVD recorder will tune to the right programme number and begin recording at the specified time. 1 Turn on the TV power. Select the correct With this DVD recorder, you can preprogramme up to six recordings within a period of 15 days. ● If the time has not set yet, the { Time and Date } menu will appear on the screen, see page 25.
{ Preset } – Select the preset channel and press OK to confirm. { Repeat } – Select {Weekly}, {Once} or {Mon-Fri} (Monday to Friday) recordings and press OK to confirm. { Record mode } – Select a record mode and press OK to confirm. See pages 33~34 “Recording settings - Recording mode”). ● To clear the timer entries, press the matching colour coded button on the remote control to select { Clear all }. ➜ All the settings in the timer menu are cleared.
Timer Recording (cont’d) English Programming recordings with the G-Code® System ● To clear the G-Code® entry, press the matching colour coded button on the remote control to select { Clear }. With this programming system, you only need to enter the G-Code® programme number as all the information needed by the DVD recorder for programming is contained in the programming number. ● To cancel the G-Code® programming, press the matching colour coded button on the remote control to select { Cancel }.
Changing a programmed recording 1 Turn on the TV power. Select the correct Video In channel at the TV. ➜ The timer overview appears. TIMER 10:55PM 23:45 21:00 06:00 PM 08:00 PM 11.55 PM Delete CNBCA Disco A BBC2 A HBO A ABCA TIMER DETAILS Weekly 12.04 Daily 16.04 13.04 New Timer 1 Turn on the TV power. Select the correct Video In channel at the TV. 2 Press TIMER on the remote control.
Editing/Finalising Recording English About editing You can change disc contents and settings for a recorded DVD+RW or unfinalised DVD+R from the edit menu screen. Photo editing is limited to edit the information on a roll or album. These editing changes are available for the DVD recorder, but may not be accessible when you play the disc on other DVD player.
Changing the disc/title name 1 Insert a recorded DVD+RW or an unfinalised DVD+R. ➜ The Index Picture screen or disc content menu appears on the TV. 2 Press EDIT on the remote control. ➜ The edit menu appears. 3 Press 3 4 to select { Disc name } or { Title name } in the menu. 4 Press 3 4 to change the character/ number or make an entry by using the alphanumeric keypad 0-9. ➜ Press 1 2 to move to the previous or next field. 5 Press OK to confirm the changes. ➜ The info panel is now updated.
Editing/Finalising Recording (cont’d) English Video editing In the edit video mode, the entire recording will be played back regardless of whether they are hidden or not. 1 Insert a recorded DVD+RW or an unfinalised DVD+R. ➜ The Index Picture screen appears on the TV. 2 Press 3 4 to select a recording. 3 Press EDIT on the remote control. ➜ The edit menu appears. 4 Press 3 4 to select { Video edit } in the menu and press OK to confirm. ➜ The video edit menu appears.
Editing/Finalising Recording (cont’d) 1 Start playback a recorded DVD+RW or an unfinalised DVD+R. 2 Press EDIT on the remote control. 3 Press the matching colour coded button on the remote control to select { Chapter }. ➜ The chapter editing menu appears. PAUSE +RW | SHREK | EDIT MODE Editing title (divide/append/Index picture) 1 Start playback a recorded DVD+RW or an unfinalised DVD+R. 2 Press EDIT on the remote control.
Editing/Finalising Recording (cont’d) English { Append } - for DVD+RW only – Select this to append record to the existing recording from the position of the playback. Continue steps 5~7. Photo editing For append recording only: The editable information items are : – Title of the currently selected item – Album edit name – Photo edit date The Photo (JPEG picture) on a DVD+R(W) are limited to edit the information. 5 Press 3 4 to select the input channel to append : { preset channel number }, { EXT1 }.
Browsing the disc You can view and manage possible contents within your discs by using an on-screen console called the Media Browser. Colour coded buttons functions In the Media Browser mode, a number of functions is available via the colour coded buttons on the remote control. colour coded buttons (red, green, yellow, blue) 1 Insert a disc into the DVD recorder. ➜ The Index Picture screen or disc content menu appears on the TV.
Using the Browser (cont’d) English Browsing the picture disc The Media Browser allows you to view the JPEG pictures discs or playback as a slide show or store them in an album. 3 Press OK to display the picture overview. ➜ The 12 roll thumbnails picture screen appears. 06/06/2004 DVD / Photo / Rolls / Roll KYZ JPEG Photo can be stored up to a maximum of 100 photos in one album on a DVD+RW or DVD+R from this DVD recorder, depends on the JPEG file parameters.
Changing the picture order within an album You can re-arrange the picture position in the album in order to create the desired order of the slide show. The order of the pictures in the photo roll remains unchanged. 1 Press BROWSER on the remote control. ➜ The disc content menu appears. 2 Press 1 2 to select photo album menu and press 3 4 to select a desired photo album folder. 5 Press the matching colour button on the remote control to select { Move }.
Using the Browser (cont’d) English Changing the slide show settings You can adjust the various slide show settings to your individual needs. 1 Press BROWSER on the remote control. ➜ The disc content menu appears. 2 Press 1 2 to select photo roll/album menu and press 3 4 to select a desired photo roll/album folder. 3 Press PLAY 2 to start slide show play. Protecting the recorded title (DVD+RW) You can choose to protect a recorded title on an DVD+RW in order to prevent accidental loss of recordings.
System Menu - Preferences 1 Switch on the TV set. Select the correct Recording For more information on this menu, please see pages 33~35 “Recording settings”. English Accessing to the Preferences options Video In channel at the TV. 2 Press SYSTEM-MENU on the remote control. ➜ The system menu appears on TV. 3 Press 4 to select { Preferences }.
System Menu - Preferences (cont’d) Features English Disc DVD-VIDEO-TITLE 04|CO1 STOP DVD-VIDEO-TITLE 04|CO1 Disc STOP Features Preferences Preferences Adapt menu Auto resume Delete all Auto play Dealer demo { Adapt menu } If a DVD+RW has been recorded in a computer drive or in another DVD recorder, the Picture Index screen may not be displayed correctly. This feature allows you to change the format of the disc to ‘Philips’ type.
System Menu - Setup Accessing to the Setup options DVD-VIDEO-TITLE 04|CO1 1 Turn on the TV set. Select the correct Video In channel at the TV. English System STOP System Set-up Auto standby 2 Press SYSTEM-MENU on the remote control. ➜ The system menu appears on TV. Second RC OSD Display 3 Press 4 repeatedly to select { Set-up }. ➜ Playback will pause. PBC DVD-VIDEO-TITLE 04|CO1 STOP Version Info System Time-date Analogue Ch.
System Menu - Setup (cont’d) English { Display } Allows you to change the brightness of the DVD recorder display panel. – { Bright } : Normal brightness. – { Dimmed } : Medium brightness. – { Off } : Turn off the display. Video output DVD-VIDEO-TITLE 04|CO1 STOP Video output Set-up TV shape & Black level { PBC } - for Video CD only Play Back Control allows you to play Video CDs (2.0) interactively, following the menu on the display.
Audio output After connecting the DVD recorder to your TV and other devices, you may need to change the digital output setting. Adjust the Digital Output only if you used the DVD recorder’s COAXIAL/OPTICAL socket. DVD-VIDEO-TITLE 04|CO1 Language For more information on this menu, please see page 25 “Setting the language”.
Setting Access Control English About Access Control 6 Use the alphanumeric keypad 0-9 to Access Control limits viewing of discs that exceed the limits you set. Philips cannot guarantee the availability of Access Control with all discs, and therefore denies any liability associated with unintended watching of discs. enter your new four-digit pin code. You must enter the same pin code a second time to confirm it. ➜ To cancel your change, press 4 to select { Cancel } and press OK to confirm.
Setting Access Control (cont’d) English 1 Alternatively, we can lock the disc while in browser mode; Press the BROWSER on the remote control. ➜ The disc content menu appears. 2 Press the matching colour coded button on the remote control to select { ChildLock }. ➜ The disc is now locked. You must enter the four-digit pin code the next time when you insert the disc. Helpful Hint: – Two-sided DVDs and multi-volume discs may have a different ID for each side/ volume.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution No power. – Press STANDBY button on the front of the DVD recorder to turn on the system.
Problem Solution Disc will not play. – Insert the disc with the label facing up. – The child lock is on. Read chapter “Setting Access Control Activating/Deactivating the child lock” for details. – Wrong region code. The DVD must be coded for ALL regions or the respective region code in order to play on this DVD recorder. – There is no recording on the disc or wrong disc type. Read chapter “Playback - Playable discs” for details. – Make sure the disc is not scratched or warped.
Troubleshooting (cont’d) English Problem Solution Recordings are not occurring as scheduled. New recordings cannot be made. – The TV channel you want to record is not stored or you selected the wrong programme number. Check TV channels stored. – If you adjust the clock after you set a timer recording, reset the timer recording. – If the DVD recorder cannot read the disc, you cannot record.
Problem Solution The message 'Disc contains unknown data' appears. – This message may appear if you insert a disc that was not finalised. DVD+R's that have not been finalised are very sensitive to fingerprints, dust, or dirt. This may cause problems during recording. To use the disc again, do the following : 1) Make sure that the surface of the disc is clean. 2) Press OPEN/CLOSE on the DVD recorder to open the disc tray. 3) Insert the disc but do not close the tray.
Troubleshooting (cont’d) English Problem Solution The message 'Recording of will start within 1 minute' appears. – – – Select { Switch now } to switch the DVD recorder to standby mode. A programmed timer recording will only start recording if the DVD recorder is in standby mode. Select { Suspend } will suspend the timer recording. Select { Cancel recording } will cancel the timer recording. The message 'Insert recordable disc' appears.
Disc types Front Connections Recording : DVD+RW/+R Playing: DVD-Video,Video CD, SuperVCD,Audio CD, MP3 CD, Picture CD, CD-R/RW, DVD-R, DVD-RW – – – – Record modes Timer Recording recording time / picture quality M1: 60 minutes/high quality M2: 120 minutes/DVD quality M2x: 150 minutes/DVD quality M3: 180 minutes/S-VHS quality M4: 240 minutes/VHS quality M6: 360 minutes/VHS quality M8: 480 minutes/VHS quality – 1-month timer programming, 6 events – daily/weekly repeat recording – G-Code programming TV
Display panel symbols/messages English The following symbols/messages may appear on your DVD recorder display: ● COMPATIBLE The DVD Recorder is busy making changes to make the disc DVD-compatible. ● CLOSING Disc tray is closing.
● IS THE TV ON? ● PHOTO MMM/NNN The DVD Recorder is currently in the first installation mode. Turn on your TV and read the section, 'First installation', in the chapter 'Installing the DVD Recorder'. ● MAX TITLE The maximum number of titles has been reached for the disc. Each disc can have a maximum of 49 titles. ● MAX CHAP Number of the current photo (for Photo mode). MMM represents the order of the current photo, NNN represents the total number of photos in the album.
Glossary English Analogue: Sound that has not been turned into numbers. Analogue sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Red and white jacks on the back of the system that send audio to another system (TV, Stereo, etc.).
DVDR6xx_69_Eng_14212 67 9/1/04, 5:31 PM 3139 246 14211
TV System Guide COUNTRY VHF AFGHANISTAN ALBANIA ALGERIA ANGOLA ARGENTINA AUSTRALIA AUSTRIA AZORES BAHAMAS BAHRAIN BANGLADESH BARBADOS BELGIUM BERMUDA BOLIVIA BOTSWANA BRAZIL BRUNEI BULGARIA BURKINA FASO BURMA BURUNDI CAMBODIA CAMEROON CANADA CANARY ISLANDS CHAD CHILE CHINA COLOMBIA COSTA RICA CROATIA CUBA CYPRUS CZECH REPUBLIC DAHOMEY DENMARK DJIBOUTI DOMINICAN REP ECUADOR EGYPT EL SALVADOR EQUAT.
TV System Guide (cont’d) COUNTRY VHF UHF DVD REGIONS LIBYA LITHUANIA LUXEMBOURG MADAGASCAR MADEIRA MALAGASY MALAWI MALAYSIA MALI MALTA MARTINIQUE MAURITANIA MAURITIUS MEXICO MONACO MONGOLIA MOROCCO MOZAMBIQUE NAMIBIA NEPAL NETHERLANDS NETH. ANTILLES NEW CALEDONIA NEW GUINEA NEW ZEALAND NICARAGUA NIGER NIGERIA NORWAY OMAN PAKISTAN PANAMA PARAGUAY PERU PHILIPPINES POLAND PORTUGAL PUERTO RICO QATAR REUNION RUMANIA RUSSIA RWANDA SABAH/SAWARA ST.
Meet Philips at the Internet http://www.philips.com http://www.p4c.philips.
DVDR615 QUICK USE GUIDE 12nc: 3139 246 14152 LANGUAGE AND COUNTRY Select Language and Country ANTENNA/ CABLE SIGNAL Menu English Spanish French Language Country 4 Done 5 TV FORMAT 1 Select your TV format 2 4 3 TV format Done CHANNEL SEARCH Automatic channel search will find and store all channels. Make sure to connect the Antenna.
... cont. SUPER VIDEO 1.3 1.3 CH- CH+ CH- CH+ {0} 34 1234 OK CH+ CH+ EDIT CHCH- PLAY 2 4 1 2 Start manual recording Insert a recordable DVD+R(W) with the label side facing up. Press TUNER on the remote control to see the TV programmes, then press 3 4 to select the programme number you wish to record. 5 1 2 ➜ If you wish to record from additional devices (e.g.Video Cassette Recorder), press button 3 4 on the remote control to select the correspond external input channel.
