Software Upgrade

Software upgrade history
Software Version BT1_35
Release Date 17 October, 2005
(1) Unable to perform timer recoring from Y/C input.
Software upgrade now enables the possibility of timer recordings from Y/C input.
(2) Unable to switch the TV to a decoder channel (Canal+) when direct recording has
been initiated.
It is now possible to tune to a decoder channel after direct recording has been initiated.
(3) Red LED doesn’t light up during recoding.
Recording in progress is indicated with red LED.
(4) Aspect ratio of video output incorrect during RGB to CVBS switching.
Correct video output display on TV whenever switching during RGB to CVBS.
Software Version BT1_31
Release Date 3 Jun 2005
(1) Cannot playback 8x speed DVD+R DVD disc recorded in DVDR610/DVDR615/DVDR616
The driver software is now improved to handle DVD+R 8x discs.
(2) During Standby-by mode, the clock on the local display sometimes blinks for 1 second.
Blanking time has now been improved.
(3) Recorded titles on DVD+R/RW are directly deleted when red button is pressed.
An interactive menu has been added to confirm title deletion.
(4) After a timer program of a preset with decoder mode is activated (e.g., Canal+ channel),
then when switching-on the TV will result in a blank screen.
Software has improved to handle this situation correctly.
(5) Clock is approximately 30 to 40 seconds offset compared to the teletext clock for
automatic time setting.
Time and date download from the broadcasted time has been improved.
(6) Black line appeared during playback of 16:9 DVD when 4:3 pan scan mode is selected.
Software has been improved to remote this line.
(7) Blank screen on TV during Timer Recording
During Timer recording, a blank screen is screen on the TV that’s connected via SCART to EXT1. To
watch what is recorded, press TV/DVD on the remote control.