User Guide

Antenna or Cable TV signal
or coaxial cable from Cable Box
To Power Outlet
QUICK-USE GUIDE
12nc: 8239 300 33901
DVDR600VR
1 Remove the Antenna or Cable TV signal from your TV.
Connect it to the ANTENNA IN jack at the rear of the
Recorder.
2 Connect the supplied RF coaxial cable to the (Antenna)
OUT jack on the Recorder and to your TV’s ANTENNA
IN or RF INPUT jack.
3 Connect the Recorder’s power cord to a power outlet.
Helpful Hint:
If your TV has different connectors, refer to the TV
manual for connection options. Also refer to the
Recorder’s owner’s manual, which details other TV
connection possibilities.
Prepare the remote control
Initial Setup screens will appear the first time you turn on the
Recorder.
1 Press STANDBY-ON
22
22
2 to turn on the Recorder.
2 Turn on the TV and select channel 3.
NO PICTURE? Make sure the TV is on channel 3 if you used
the simple connection shown in section 1 of this Quick-Use
Guide. To use channel 4 or another Video channel at your TV,
refer to the owner's manual for different connections.
3 The Initial Setup menu will appear.
Use 3 or 4 to choose a setting for each item, then press
OK to confirm.
The following menus will appear:
Menu Language
• English, Español, Français – Select a language for the Recorder’s
menus and on-screen displays.
Audio Language
• English, Español, Français, etc – Select a DVD audio language.
Subtitle Language
• English, Español, Français, etc – Select the language you prefer
for DVD subtitles.
TV Shape
• 4:3 letterbox – Stretch the DVD picture with black bars on the
top and bottom.
• 4:3 panscan – See a full-height picture with the sides trimmed.
• 16:9 – Use with widescreen TVs. (frame ratio 16:9)
4 After you have connected the Antenna or Cable TV signal to
the Recorder’s ANTENNA IN jack, press OK.
5 Searching for TV Channels will appear.
Once the TV channel search is complete, the number of channels found
will appear.
6 Press SYSTEM MENU. T he Recorder will turn off, then on
again.
The Recorder is ready for use!
Complete Initial Setup Connect the Recorder
1
1
3
2
2
1
3
3
STANDBY-ON
OK
MENUMENU
DISC SYSTEM
CHANNEL
TV/VIDEO
OPEN/CLOSE
DVD
VCR CLEAR
MONITOR VCR Plus+/TIMER
RETURNSELECT
PLAY
STOP DVD RECVCR REC
PLAY MODEMODE AUDIO
DISPLAYT/CFSS SLOW
MODE
SEARCH
MUTEVOLUME
TV
PAUSE
1 2 3
4 5 6
7 8 9
0
EJECT
REC
~ Initial Setup
Menu Language
Press OK to continue
English
Español
Français
~ Initial Setup
Audio Language
Press OK to continue
English
Español
Français
Português
Italiano
~ Initial Setup
Subtitle Language
Press OK to continue
English
Español
Français
Português
Italiano
~ Initial Setup
TV Shape
4:3 letterbox
4:3 panscan
16:9
Press OK to continue
Installation
Auto Ch. Programming
Auto ch. search complete
024 Channels found
To exit press
SYSTEM MENU
3-4
1
6
2
STANDBY-ON
POWER ON
STOP/EJECT PLAY REW F.FWD RECORD CHANNEL D.DUBBING
DVD
OPEN/CLOSE
SOURCE STOP PLAY RECORD
IR
VCR DVD
ONE TOUCH RECORDING · LONG PLAY
4 HEAD HI-FI STEREO
DV
PROGRESSIVE SCAN
DVD RECORDER
DVD+RW/+R RECORDING
IS TV ON? CO3
DVDR600VR_QUG.fm 04.7.22, 1:29 PM1