Specifications

78 EN
Picture
No picture. Turn on your TV and to the correct Video In channel for the
recorder. You may go to Channel 1 (or the lower channel) on
your TV, then press the channel down button on your TV until
you see the recorder’s built-in live TV broadcast.
Check the video connection between this recorder and the TV.
•
•
JPEG photos cannot be
displayed.
This unit only supports pictures in JPEG-Exif fi le format, using
4:2:2 or 4:2:0 chroma subsampling, with a resolution not
exceeding 4096 x 4096 (horizontal/vertical). JPEG pictures that
download from the internet or have been modifi ed using
computer may not be able to display properly.
•
No picture on HDMI
connection.
Ensure that the active video output matches the connection
(see ‘Adjust settings - Video output settings > [ Active video
output ]’).
Ensure that the HDMI video resolution of this recorder matches
the capabilities of the connected TV/device (see ‘Adjust settings
- Video output settings’).
Check if the HDMI cable is faulty. Replace a new HDMI cable.
•
•
•
Sound
No sound. Check the audio connections.
Set the Analogue output or Digital output correctly based on
the device you have connected to this recorder. See chapter
‘Adjust settings - Audio settings’ for details.
•
•
The connected amplifi er
produces distorted sound.
Do not connect any cables from this recorder to the ‘Phono’
input of your amplifi er.
When you play a DTS source, connect the amplifi er to the
COAXIAL/OPTICAL DIGITAL OUT socket of this recorder. If
the amplifi er does not support DTS, it may produce distorted
sound.
•
•
No surround sound output
on HDMI connection.
It depends on your TV audio capabilities. In this case, connect
COAXIAL/OPTICAL OUT of this recorder to your TV, then
turn off the HDMI audio setting (see ‘Adjust settings - Audio
settings > [HDMI audio ]’).
•