Specifications

68 EN
Analogue tuner settings
Digital tuner
Setup
Auto search
Manual install
Favourites
Sort channels
Language
Recording
Playback
Video output
Audio
Analogue tuner
Note
When you access this setting, the Time Shift Buffer
is cleared.
•
Reinstall all analogue TV channels
1 Press OPTIONS.
2 Select [ Settings ] > [ Analogue
tuner ] > [ Auto search ].
3 Press OK to start channels search.
 All previously stored analogue TV
channels are replaced.
4 To exit the menu, press OPTIONS.
Tune/modify channels manually
If the channels you want are not stored or not
correctly stored, you have to manually enter
and store the required channels. For easy
identifi cation, you can give the preset channels
with four-character names.
1 Press OPTIONS.
2 Select [ Settings ] > [ Analogue tuner ] >
[ Manual install ].
3 Enter the details of the required channel as
below:
[ Entry mode ]
Select manual search entry mode, then
press OK.
[ CH ] – search by channel.
[ S-CH ] – search by special channel.
[ MHz ] – search by frequency.
[ Entry ]
Enter the channel number or frequency
value, then press OK.
Or;
Press the Blue button on the remote
control for [ Search ]. Once the correct
channel/frequency is found, press the
Green button [ Store ] to store.
[ Preset ]
Enter the preset number that you want to
allocate this channel (e.g. ‘01’), then press
OK followed by Green button [ Store ] to
store.
[ Preset name ]
Enter a four-character name for this
channel, then press OK followed by Green
button [ Store ] to store.
4 To exit the menu, press OPTIONS.
•
•
•